Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754155Ab3GBRJy (ORCPT ); Tue, 2 Jul 2013 13:09:54 -0400 Received: from mail1.bemta7.messagelabs.com ([216.82.254.106]:28327 "EHLO mail1.bemta7.messagelabs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753085Ab3GBRJv (ORCPT ); Tue, 2 Jul 2013 13:09:51 -0400 X-Env-Sender: hartleys@visionengravers.com X-Msg-Ref: server-13.tower-209.messagelabs.com!1372784990!6331869!1 X-Originating-IP: [216.166.12.98] X-StarScan-Received: X-StarScan-Version: 6.9.9; banners=-,-,- X-VirusChecked: Checked From: H Hartley Sweeten To: Linux Kernel Subject: [PATCH v2 07/11] spi: spi-ep93xx: remove 'dss' from per chip private data Date: Tue, 2 Jul 2013 10:09:29 -0700 User-Agent: KMail/1.9.9 CC: , Ryan Mallon , , , , MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-ID: <201307021009.30230.hartleys@visionengravers.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3242 Lines: 94 This value is only needed to set the bits per word for each transfer of a message. There is no reason to set the value in ep93xx_spi_enable() because ep93xx_spi_process_transfer() sets it again for each transfer. Just pass the t->bits_per_word directly to ep93xx_spi_chip_setup() in ep93xx_spi_process_transfer() and remove 'dss' from the per chip private data. Signed-off-by: H Hartley Sweeten Cc: Ryan Mallon Cc: Mika Westerberg Cc: Mark Brown Cc: Grant Likely --- drivers/spi/spi-ep93xx.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 34aade1..cc2a240 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -139,7 +139,6 @@ struct ep93xx_spi { * @rate: max rate in hz this chip supports * @div_cpsr: cpsr (pre-scaler) divider * @div_scr: scr divider - * @dss: bits per word (4 - 16 bits) * @ops: private chip operations * * This structure is used to store hardware register specific settings for each @@ -151,7 +150,6 @@ struct ep93xx_spi_chip { unsigned long rate; u8 div_cpsr; u8 div_scr; - u8 dss; struct ep93xx_spi_chip_ops *ops; }; @@ -329,8 +327,6 @@ static int ep93xx_spi_setup(struct spi_device *spi) chip->rate = spi->max_speed_hz; } - chip->dss = bits_per_word_to_dss(spi->bits_per_word); - ep93xx_spi_cs_control(spi, false); return 0; } @@ -407,22 +403,25 @@ static void ep93xx_spi_cleanup(struct spi_device *spi) * ep93xx_spi_chip_setup() - configures hardware according to given @chip * @espi: ep93xx SPI controller struct * @chip: chip specific settings + * @bits_per_word: transfer bits_per_word * * This function sets up the actual hardware registers with settings given in * @chip. Note that no validation is done so make sure that callers validate * settings before calling this. */ static void ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, - const struct ep93xx_spi_chip *chip) + const struct ep93xx_spi_chip *chip, + u8 bits_per_word) { + u8 dss = bits_per_word_to_dss(bits_per_word); u16 cr0; cr0 = chip->div_scr << SSPCR0_SCR_SHIFT; cr0 |= (chip->spi->mode & (SPI_CPHA|SPI_CPOL)) << SSPCR0_MODE_SHIFT; - cr0 |= chip->dss; + cr0 |= dss; dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", - chip->spi->mode, chip->div_cpsr, chip->div_scr, chip->dss); + chip->spi->mode, chip->div_cpsr, chip->div_scr, dss); dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0); ep93xx_spi_write_u8(espi, SSPCPSR, chip->div_cpsr); @@ -709,9 +708,7 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, return; } - chip->dss = bits_per_word_to_dss(t->bits_per_word); - - ep93xx_spi_chip_setup(espi, chip); + ep93xx_spi_chip_setup(espi, chip, t->bits_per_word); espi->rx = 0; espi->tx = 0; -- 1.8.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/