Date: Thu, 4 Jul 2013 10:16:02 +0900
From: Simon Horman <horms@verge.net.au>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Magnus Damm <magnus.damm@gmail.com>, linux-sh@vger.kernel.org,
        linus.walleij@linaro.org, linux-kernel@vger.kernel.org,
        grant.likely@linaro.org
Subject: Re: [PATCH] gpio: em: Add pinctrl support
Message-ID: <20130704011601.GB13029@verge.net.au>
References: <20130703041432.7351.45970.sendpatchset@w520>
 <2134291.KQ1KkPOaiZ@avalon>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <2134291.KQ1KkPOaiZ@avalon>
Organisation: Horms Solutions Ltd.
User-Agent: Mutt/1.5.21 (2010-09-15)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4186
Lines: 122

On Wed, Jul 03, 2013 at 08:59:39PM +0200, Laurent Pinchart wrote:
> Hi Magnus,
> 
> Thank you for the patch.
> 
> On Wednesday 03 July 2013 13:14:32 Magnus Damm wrote:
> > From: Magnus Damm <damm@opensource.se>
> > 
> > Register the GPIO pin range, and request and free GPIO pins using the
> > pinctrl API. The pctl_name platform data member should be used by
> > platform devices to point out which pinctrl device to use.
> > 
> > Follows same style as "dc3465a gpio-rcar: Add pinctrl support",
> > by Laurent Pinchart, thanks to him.
> > 
> > Signed-off-by: Magnus Damm <damm@opensource.se>
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> Linus, now that the v3.12 development cycle will begin, would you like to take 
> the patch through your tree ? If so, how should we handle cross-dependencies 
> between the pinctrl/gpio tree and the Renesas ARM tree ?

In the case of this patch I believe that any dependencies
that are present in the renesas tree have been merged into
the arm-soc tree and thus should appear in v3.11-rcX, where X most
likely equals 2 or 3.

That being so v3.11-rcX could be used as a base.

Alternatively its likely that one the renesas-*-for-v3.11 tags
in my renesas tree, all of which have been merged into arm-soc and
should appear in v3.11-rcX, could be used as a base.

I'm unsure which one as I'm unsure what the dependencies are but
I strongly suspect that renesas-gpio-rcar2-for-v3.11 would be a good
choice.


> 
> > ---
> > 
> >  drivers/gpio/gpio-em.c                |   25 +++++++++++++++++++++++++
> >  include/linux/platform_data/gpio-em.h |    1 +
> >  2 files changed, 26 insertions(+)
> > 
> > --- 0001/drivers/gpio/gpio-em.c
> > +++ work/drivers/gpio/gpio-em.c	2013-07-03 12:49:55.000000000 +0900
> > @@ -30,6 +30,7 @@
> >  #include <linux/gpio.h>
> >  #include <linux/slab.h>
> >  #include <linux/module.h>
> > +#include <linux/pinctrl/consumer.h>
> >  #include <linux/platform_data/gpio-em.h>
> > 
> >  struct em_gio_priv {
> > @@ -216,6 +217,21 @@ static int em_gio_to_irq(struct gpio_chi
> >  	return irq_create_mapping(gpio_to_priv(chip)->irq_domain, offset);
> >  }
> > 
> > +static int em_gio_request(struct gpio_chip *chip, unsigned offset)
> > +{
> > +	return pinctrl_request_gpio(chip->base + offset);
> > +}
> > +
> > +static void em_gio_free(struct gpio_chip *chip, unsigned offset)
> > +{
> > +	pinctrl_free_gpio(chip->base + offset);
> > +
> > +	/* Set the GPIO as an input to ensure that the next GPIO request won't
> > +	* drive the GPIO pin as an output.
> > +	*/
> > +	em_gio_direction_input(chip, offset);
> > +}
> > +
> >  static int em_gio_irq_domain_map(struct irq_domain *h, unsigned int virq,
> >  				 irq_hw_number_t hw)
> >  {
> > @@ -308,6 +324,8 @@ static int em_gio_probe(struct platform_
> >  	gpio_chip->direction_output = em_gio_direction_output;
> >  	gpio_chip->set = em_gio_set;
> >  	gpio_chip->to_irq = em_gio_to_irq;
> > +	gpio_chip->request = em_gio_request;
> > +	gpio_chip->free = em_gio_free;
> >  	gpio_chip->label = name;
> >  	gpio_chip->owner = THIS_MODULE;
> >  	gpio_chip->base = pdata->gpio_base;
> > @@ -351,6 +369,13 @@ static int em_gio_probe(struct platform_
> >  		dev_err(&pdev->dev, "failed to add GPIO controller\n");
> >  		goto err1;
> >  	}
> > +
> > +	if (pdata->pctl_name) {
> > +		ret = gpiochip_add_pin_range(gpio_chip, pdata->pctl_name, 0,
> > +					     gpio_chip->base, gpio_chip->ngpio);
> > +		if (ret < 0)
> > +			dev_warn(&pdev->dev, "failed to add pin range\n");
> > +	}
> >  	return 0;
> > 
> >  err1:
> > --- 0001/include/linux/platform_data/gpio-em.h
> > +++ work/include/linux/platform_data/gpio-em.h	2013-07-03 
> 12:45:27.000000000
> > +0900 @@ -5,6 +5,7 @@ struct gpio_em_config {
> >  	unsigned int gpio_base;
> >  	unsigned int irq_base;
> >  	unsigned int number_of_pins;
> > +	const char *pctl_name;
> >  };
> > 
> >  #endif /* __GPIO_EM_H__ */
> -- 
> Regards,
> 
> Laurent Pinchart
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/