Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751934Ab3GHLhj (ORCPT ); Mon, 8 Jul 2013 07:37:39 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:37786 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750932Ab3GHLhh (ORCPT ); Mon, 8 Jul 2013 07:37:37 -0400 Message-ID: <51DAA473.9030207@ti.com> Date: Mon, 8 Jul 2013 17:07:23 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130510 Thunderbird/17.0.6 MIME-Version: 1.0 To: George Cherian CC: , , , , , Subject: Re: [PATCH 2/5] usb: phy: phy-omap-control: Add API to power on/off USB PHY for AM335X References: <1373280201-31785-1-git-send-email-george.cherian@ti.com> <1373280201-31785-3-git-send-email-george.cherian@ti.com> In-Reply-To: <1373280201-31785-3-git-send-email-george.cherian@ti.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3612 Lines: 101 Hi, On Monday 08 July 2013 04:13 PM, George Cherian wrote: > Add API to power on/off USB PHY for AM335X. This API will be called > from phy-amxxxx-usb driver. > > Signed-off-by: George Cherian > --- > drivers/usb/phy/phy-omap-control.c | 32 ++++++++++++++++++++++++++++++++ > include/linux/usb/omap_control_usb.h | 11 +++++++++++ > 2 files changed, 43 insertions(+) > > diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c > index 1419ced..0c1822d 100644 > --- a/drivers/usb/phy/phy-omap-control.c > +++ b/drivers/usb/phy/phy-omap-control.c > @@ -46,6 +46,38 @@ struct device *omap_get_control_dev(void) > EXPORT_SYMBOL_GPL(omap_get_control_dev); > > /** > + * omap_control_am335x_phy_power - power on/off the serializer using control > + * module > + * @dev: the control module device > + * @on: 0 to off and 1 to on based on powering on or off the PHY > + * @id: phy id 0 or 1 for phy instance 0 and 1 repectively > + * > + * AMXXXX PHY driver should call this API to power on or off the PHY. > + */ > +void omap_control_am335x_phy_power(struct device *dev, bool on, u8 id) > +{ > + u32 val; > + struct omap_control_usb *control_usb = dev_get_drvdata(dev); > + > + if (control_usb->type != OMAP_CTRL_DEV_TYPE3) > + return; Lets validate id also here. > + > + val = readl(control_usb->dev_conf + (id * 2)); Understand you use id to calculate the offset. But looks a bit hacky to me. Can we define macros and use it instead? > + > + if (on) { > + val &= ~(AM335X_USBPHY_CM_PWRDN | AM335X_USBPHY_OTG_PWRDN); > + val |= AM335X_USBPHY_OTGVDET_EN | > + AM335X_USBPHY_OTGSESSEND_EN; > + } else > + val |= AM335X_USBPHY_CM_PWRDN | AM335X_USBPHY_OTG_PWRDN; > + > + > + writel(val, (control_usb->dev_conf + (id * 2))); > +} > +EXPORT_SYMBOL_GPL(omap_control_am335x_phy_power); > + > + > +/** > * omap_control_usb3_phy_power - power on/off the serializer using control > * module > * @dev: the control module device > diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h > index 27b5b8c..11d7a34 100644 > --- a/include/linux/usb/omap_control_usb.h > +++ b/include/linux/usb/omap_control_usb.h > @@ -45,6 +45,7 @@ enum omap_control_usb_mode { > /* To differentiate ctrl module IP having either mailbox or USB3 PHY power */ > #define OMAP_CTRL_DEV_TYPE1 0x1 > #define OMAP_CTRL_DEV_TYPE2 0x2 > +#define OMAP_CTRL_DEV_TYPE3 0x3 > > #define OMAP_CTRL_DEV_PHY_PD BIT(0) > > @@ -63,10 +64,20 @@ enum omap_control_usb_mode { > #define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3 > #define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0 > > +#define AM335X_USBPHY_CM_PWRDN (1 << 0) > +#define AM335X_USBPHY_OTG_PWRDN (1 << 1) > +#define AM335X_USBPHY_OTGVDET_EN (1 << 19) > +#define AM335X_USBPHY_OTGSESSEND_EN (1 << 20) > +#define AM335X_USB0_WKUP_CTRL_ENABLE (1 << 0) > +#define AM335X_USB1_WKUP_CTRL_ENABLE (1 << 8) > + > + > + > #if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) > extern struct device *omap_get_control_dev(void); > extern void omap_control_usb_phy_power(struct device *dev, int on); > extern void omap_control_usb3_phy_power(struct device *dev, bool on); > +extern void omap_control_am335x_phy_power(struct device *dev, bool on, u8 id); You might also need to provide an empty stub when CONFIG_OMAP_CONTROL_USB is not set. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/