Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756385Ab3GQPyS (ORCPT ); Wed, 17 Jul 2013 11:54:18 -0400 Received: from 8.mo1.mail-out.ovh.net ([178.33.110.239]:54090 "EHLO mo1.mail-out.ovh.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754263Ab3GQPyR (ORCPT ); Wed, 17 Jul 2013 11:54:17 -0400 From: Boris BREZILLON To: Nicolas Ferre , Ludovic Desroches , Jean-Christophe Plagniol-Villard , Mike Turquette , Russell King , Mark Brown , Bo Shen Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Boris BREZILLON X-Ovh-Mailout: 178.32.228.1 (mo1.mail-out.ovh.net) Subject: [PATCH v2 29/42] ARM: at91/dt: move at91sam9260 SoC to new at91 clk implem Date: Wed, 17 Jul 2013 17:53:57 +0200 Message-Id: <1374076437-20418-1-git-send-email-b.brezillon@overkiz.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1374068069-13496-1-git-send-email-b.brezillon@overkiz.com> References: <1374068069-13496-1-git-send-email-b.brezillon@overkiz.com> X-Ovh-Tracer-Id: 13690098443674941548 X-Ovh-Remote: 78.236.240.82 (cha74-5-78-236-240-82.fbx.proxad.net) X-Ovh-Local: 213.186.33.20 (ns0.ovh.net) X-OVH-SPAMSTATE: OK X-OVH-SPAMSCORE: -100 X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeijedrvdegucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd X-Spam-Check: DONE|U 0.5/N X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeijedrvdegucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9031 Lines: 424 Define at91sam9260 clocks in at91sam9260 device tree. Add references to the appropriate clocks in each peripheral. Signed-off-by: Boris BREZILLON --- arch/arm/boot/dts/at91sam9260.dtsi | 236 ++++++++++++++++++++++++++++++++++++ 1 file changed, 236 insertions(+) diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index c7ccbcb..24b0165 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -48,6 +48,14 @@ reg = <0x20000000 0x04000000>; }; + clocks { + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -76,6 +84,195 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + + clk32k: slck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main", "fixed-clock"; + #clock-cells = <0>; + clocks = <&clk32k>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + clocks = <&main>; + id = <0>; + input = <1000000 32000000>; + output = <80000000 160000000 + 150000000 240000000>; + out = <0 2>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + clocks = <&main>; + id = <1>; + input = <1000000 5000000>; + output = <70000000 130000000>; + out = <1>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + output = <0 105000000>; + divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + divisors = <1 2 4 0>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #clock-cells = <1>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0@0 { + id = <0>; + }; + + prog1@1 { + id = <1>; + }; + }; + + system: systemck { + compatible = "atmel,at91rm9200-clk-system"; + #clock-cells = <1>; + + udpck@6 { + id = <6>; + }; + + uhpck@7 { + id = <7>; + }; + + pck0@8 { + id = <8>; + }; + + pck1@9 { + id = <9>; + }; + }; + + periph: periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #clock-cells = <1>; + clocks = <&mck>; + + pioA_clk@2 { + id = <2>; + }; + + pioB_clk@3 { + id = <3>; + }; + + pioC_clk@4 { + id = <4>; + }; + + adc_clk@5 { + id = <5>; + }; + + usart0_clk@6 { + id = <6>; + }; + + usart1_clk@7 { + id = <7>; + }; + + usart2_clk@8 { + id = <8>; + }; + + mci_clk@9 { + id = <9>; + }; + + udc_clk@10 { + id = <10>; + }; + + twi_clk@11 { + id = <11>; + }; + + spi0_clk@12 { + id = <12>; + }; + + spi1_clk@13 { + id = <13>; + }; + + ssc_clk@14 { + id = <14>; + }; + + tc0_clk@17 { + id = <17>; + }; + + tc1_clk@18 { + id = <18>; + }; + + tc2_clk@19 { + id = <19>; + }; + + ohci_clk@20 { + id = <20>; + }; + + pclk@21 { + id = <21>; + }; + + isi_clk@22 { + id = <22>; + }; + + usart3@23 { + id = <23>; + }; + + usart4@24 { + id = <24>; + }; + + usart5@25 { + id = <25>; + }; + + tc3_clk@26 { + id = <26>; + }; + + tc4_clk@27 { + id = <27>; + }; + + tc5_clk@28 { + id = <28>; + }; + }; }; rstc@fffffd00 { @@ -92,6 +289,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fffa0000 { @@ -100,6 +298,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&periph 17>, <&periph 18>, <&periph 19>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffdc000 { @@ -108,6 +308,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&periph 26>, <&periph 27>, <&periph 28>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; pinctrl@fffff400 { @@ -443,6 +645,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 2>; }; pioB: gpio@fffff600 { @@ -453,6 +656,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 3>; }; pioC: gpio@fffff800 { @@ -463,6 +667,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&periph 4>; }; }; @@ -472,6 +677,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -483,6 +690,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&periph 6>; + clock-names = "usart"; status = "disabled"; }; @@ -494,6 +703,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&periph 7>; + clock-names = "usart"; status = "disabled"; }; @@ -505,6 +716,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&periph 8>; + clock-names = "usart"; status = "disabled"; }; @@ -516,6 +729,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&periph 23>; + clock-names = "usart"; status = "disabled"; }; @@ -527,6 +742,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&periph 24>; + clock-names = "usart"; status = "disabled"; }; @@ -538,6 +755,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&periph 25>; + clock-names = "usart"; status = "disabled"; }; @@ -547,6 +766,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&periph 21>, <&periph 21>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -554,6 +775,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&periph 10>, <&system 6>; + clock-names = "udc_clk", "udpck"; status = "disabled"; }; @@ -563,6 +786,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 11>; status = "disabled"; }; @@ -572,6 +796,8 @@ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&periph 9>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -581,6 +807,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&periph 14>; + clock-names = "pclk"; status = "disabled"; }; @@ -592,6 +820,8 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&periph 12>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -603,6 +833,8 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&periph 13>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -610,6 +842,8 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&periph 5>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -673,6 +907,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&periph 20>, <&periph 20>, <&system 7>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/