Message-ID: <51E87C1F.1090301@hurleysoftware.com>
Date: Thu, 18 Jul 2013 19:37:03 -0400
From: Peter Hurley <peter@hurleysoftware.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130623 Thunderbird/17.0.7
MIME-Version: 1.0
To: Sarah Sharp <sarah.a.sharp@linux.intel.com>,
        joseph.salisbury@canonical.com
CC: Nestor Lopez Casado <nlopezcasad@logitech.com>, jkosina@suse.cz,
        benjamin.tissoires@gmail.com, adlr@chromium.org,
        linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-usb@vger.kernel.org
Subject: Re: [PATCH 1/2] Revert "Revert "HID: Fix logitech-dj: missing Unifying
 device issue""
References: <1374153691-25100-1-git-send-email-nlopezcasad@logitech.com> <51E84FD1.4050400@hurleysoftware.com> <20130718220936.GA8025@xanatos>
In-Reply-To: <20130718220936.GA8025@xanatos>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3491
Lines: 79

On 07/18/2013 06:09 PM, Sarah Sharp wrote:
> On Thu, Jul 18, 2013 at 04:28:01PM -0400, Peter Hurley wrote:
>> [ +cc Sarah Sharp, linux-usb ]
>>
>> On 07/18/2013 09:21 AM, Nestor Lopez Casado wrote:
>>> This reverts commit 8af6c08830b1ae114d1a8b548b1f8b056e068887.
>>>
>>> This patch re-adds the workaround introduced by 596264082f10dd4
>>> which was reverted by 8af6c08830b1ae114.
>>>
>>> The original patch 596264 was needed to overcome a situation where
>>> the hid-core would drop incoming reports while probe() was being
>>> executed.
>>>
>>> This issue was solved by c849a6143bec520af which added
>>> hid_device_io_start() and hid_device_io_stop() that enable a specific
>>> hid driver to opt-in for input reports while its probe() is being
>>> executed.
>>>
>>> Commit a9dd22b730857347 modified hid-logitech-dj so as to use the
>>> functionality added to hid-core. Having done that, workaround 596264
>>> was no longer necessary and was reverted by 8af6c08.
>>>
>>> We now encounter a different problem that ends up 'again' thwarting
>>> the Unifying receiver enumeration. The problem is time and usb controller
>>> dependent. Ocasionally the reports sent to the usb receiver to start
>>> the paired devices enumeration fail with -EPIPE and the receiver never
>>> gets to enumerate the paired devices.
>>>
>>> With dcd9006b1b053c7b1c the problem was "hidden" as the call to the usb
>>> driver became asynchronous and none was catching the error from the
>>> failing URB.
>>>
>>> As the root cause for this failing SET_REPORT is not understood yet,
>>> -possibly a race on the usb controller drivers or a problem with the
>>> Unifying receiver- reintroducing this workaround solves the problem.
>>
>>
>> Before we revert to using the workaround, I'd like to suggest that
>> this new "hidden" problem may be an interaction with the xhci_hcd host
>> controller driver only.
>>
>> Looking at the related bug, the OP indicates the machine only has
>> USB3 ports. Additionally, comments #7, #100, and #104 of the original
>> bug report [1] add additional information that would seem to confirm
>> this suspicion.
>
> Question: does this USB device need a control transfer to reset its
> endpoints when the endpoints are not actually halted?  If so, yes, that
> is a known xHCI driver bug that needs to be fixed.  The xHCI host will
> not accept a Reset Endpoint command when the endpoints are not actually
> halted, but the USB core will send the control transfer to reset the
> endpoint.  That means the device and host toggles will be out of sync,
> and all messages will start to fail with -EPIPE.
>
> Can the OP capture a usbmon trace when the device starts failing?  That
> will reveal whether this actually is the issue.  dmesg output with
> CONFIG_USB_DEBUG and CONFIG_USB_XHCI_HCD_DEBUGGING turned on would also
> be helpful.

Sarah,

I forwarded your usbmon capture request to the OP in the bug report
(I don't have an email address for the reporter).

As far as getting printk output from a custom kernel, I think that may
be beyond the reporter's capability. Perhaps one of the Ubuntu devs
triaging this bug could provide a test kernel for the OP with those
options on.

Joseph, would you be willing to do that?

Regards,
Peter Hurley
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/