Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 9 Oct 2002 12:55:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 9 Oct 2002 12:55:18 -0400 Received: from 213-187-164-2.dd.nextgentel.com ([213.187.164.2]:38535 "EHLO mail.pronto.tv") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Wed, 9 Oct 2002 12:55:10 -0400 Content-Type: text/plain; charset=US-ASCII From: Roy Sigurd Karlsbakk Organization: ProntoTV AS To: Kernel mailing list Subject: Re: Hang in 2.4.20-pre10 with e100 (more info) Date: Wed, 9 Oct 2002 19:02:12 +0200 User-Agent: KMail/1.4.1 References: <200210091601.37036.roy@karlsbakk.net> In-Reply-To: <200210091601.37036.roy@karlsbakk.net> MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT Message-Id: <200210091902.12410.roy@karlsbakk.net> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11752 Lines: 256 This is with the original Becker driver ... Trying the Intel driver now ... Strange ... REALLY strange ... the error seems reproducable with both drivers ;-P and on both motherboards anyone? On Wednesday 09 October 2002 16:01, Roy Sigurd Karlsbakk wrote: > hi > > When downloading/streaming high amounts of data (over HTTP), Linux > 2.4.20-pre10 hangs. And it really hangs. alt+sysrq (from usb keyboard) > doesn't work... The problem is easily reproducable by just doing a wget > http://something/largefile (interface used is PCI ID 01:02.0) > > the problem does not occur when streaming over the Intel gigE interface. > > roy > > > bash-2.05# lspci -vvvvvvvvvvv > 00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 01) > Subsystem: Intel Corp.: Unknown device 2560 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: [e4] #09 [1105] > > 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2562 (rev > 01) (prog-if 00 [VGA]) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 01) (prog-if > 00 [UHCI]) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at e800 [size=32] > > 00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 01) (prog-if > 00 [UHCI]) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at e880 [size=32] > > 00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 01) (prog-if > 00 [UHCI]) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin C routed to IRQ 5 > Region 4: I/O ports at ec00 [size=32] > > 00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 01) (prog-if > 20 [EHCI]) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin D routed to IRQ 9 > Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] #0a [2080] > > 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 81) (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: ff800000-ff8fffff > Prefetchable memory behind bridge: e6a00000-e6afffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > > 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > > 00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 01) (prog-if > 8a [Master SecP PriP]) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 0: I/O ports at [size=8] > Region 1: I/O ports at [size=4] > Region 2: I/O ports at [size=8] > Region 3: I/O ports at [size=4] > Region 4: I/O ports at ffa0 [size=16] > Region 5: Memory at 1ff00000 (32-bit, non-prefetchable) [disabled] > [size=1K] > > 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 01) > Subsystem: Intel Corp.: Unknown device 4c59 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at e000 [size=32] > > 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev > 01) Subsystem: Intel Corp.: Unknown device 0302 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at e400 [size=256] > Region 1: I/O ports at e080 [size=64] > Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 Unknown mass storage controller: Promise Technology, Inc. 20268 > (rev 02) (prog-if 85) > Subsystem: Promise Technology, Inc. Ultra100TX2 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > SERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at dc00 [size=8] > Region 1: I/O ports at d880 [size=4] > Region 2: I/O ports at d800 [size=8] > Region 3: I/O ports at d480 [size=4] > Region 4: I/O ports at d400 [size=16] > Region 5: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at ff8f8000 [disabled] [size=16K] > Capabilities: [60] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:01.0 Unknown mass storage controller: Promise Technology, Inc. 20268 > (rev 02) (prog-if 85) > Subsystem: Promise Technology, Inc. Ultra100TX2 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- > SERR- Latency: 32 (1000ns min, 4500ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at d080 [size=8] > Region 1: I/O ports at d000 [size=4] > Region 2: I/O ports at df00 [size=8] > Region 3: I/O ports at de80 [size=4] > Region 4: I/O ports at de00 [size=16] > Region 5: Memory at ff8f4000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at ff8f0000 [disabled] [size=16K] > Capabilities: [60] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:02.0 Ethernet controller: Intel Corp.: Unknown device 100e (rev 02) > Subsystem: Intel Corp.: Unknown device 002e > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (63750ns min), cache line size 08 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at ff8c0000 (32-bit, non-prefetchable) [size=128K] > Region 1: Memory at ff8a0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at dd80 [size=64] > Expansion ROM at ff880000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device. > Command: DPERE- ERO+ RBC=0 OST=0 > Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, > DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- > Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable- > Address: 0000000000000000 Data: 0000 > > 01:08.0 Ethernet controller: Intel Corp.: Unknown device 1039 (rev 81) > Subsystem: Intel Corp.: Unknown device 3013 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (2000ns min, 14000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at ff8ef000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at dd00 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- -- Roy Sigurd Karlsbakk, Datavaktmester ProntoTV AS - http://www.pronto.tv/ Tel: +47 9801 3356 Computers are like air conditioners. They stop working when you open Windows. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/