Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752907Ab3GWCGD (ORCPT ); Mon, 22 Jul 2013 22:06:03 -0400 Received: from mail-pb0-f41.google.com ([209.85.160.41]:63290 "EHLO mail-pb0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752015Ab3GWCGA (ORCPT ); Mon, 22 Jul 2013 22:06:00 -0400 MIME-Version: 1.0 In-Reply-To: <1374488380-26428-1-git-send-email-manjunath.goudar@linaro.org> References: <1372347109-5563-1-git-send-email-manjunath.goudar@linaro.org> <1374488380-26428-1-git-send-email-manjunath.goudar@linaro.org> From: Wan ZongShun Date: Tue, 23 Jul 2013 10:05:39 +0800 Message-ID: Subject: Re: [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver To: Manjunath Goudar Cc: linux-usb@vger.kernel.org, linux-arm-kernel , patches@linaro.org, Alan Stern , Arnd Bergmann , linaro-kernel@lists.linaro.org, Greg KH , linux-kernel Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6848 Lines: 211 2013/7/22 Manjunath Goudar : > Separate the W90X900(W90P910) on-chip host controller driver from > ehci-hcd host code so that it can be built as a separate driver module. > This work is part of enabling multi-platform kernels on ARM; > however, note that other changes are still needed before W90X900(W90P910) > can be booted with a multi-platform kernel > > and an ehci driver that only works on one of them. > > With the infrastructure added by Alan Stern in patch 3e0232039 > "USB: EHCI: prepare to make ehci-hcd a library module", we can > avoid this problem by turning a bus glue into a separate > module, as we do here for the w90X900 bus glue. > > Signed-off-by: Manjunath Goudar > Acked-by: Arnd Bergmann > Cc: Greg KH > Cc: Alan Stern > Cc: Wan ZongShun > Cc: linux-usb@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Manjunath, Thanks for your patch, it is good to me. Acked-by: Wan Zongshun > V2: > -Arranged #include's in alphabetical order. > -Replaced "w90p910" by "w90x900" because it is supports > all series of w90x900. > --- > drivers/usb/host/Kconfig | 2 +- > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-hcd.c | 5 --- > drivers/usb/host/ehci-w90x900.c | 85 ++++++++++++++++----------------------- > 4 files changed, 37 insertions(+), 56 deletions(-) > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index ba52912..7bc598b 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -244,7 +244,7 @@ config USB_EHCI_MV > SoCs, see USB_EHCI_HCD_ORION for those. > > config USB_W90X900_EHCI > - bool "W90X900(W90P910) EHCI support" > + tristate "W90X900(W90P910) EHCI support" > depends on ARCH_W90X900 > ---help--- > Enables support for the W90X900 USB controller > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > index 7664db8..28adb3f 100644 > --- a/drivers/usb/host/Makefile > +++ b/drivers/usb/host/Makefile > @@ -35,6 +35,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o > obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o > obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o > obj-$(CONFIG_USB_EHCI_MV) += ehci-mv.o > +obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o > > obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o > obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c > index 5717dcd..4a5644e 100644 > --- a/drivers/usb/host/ehci-hcd.c > +++ b/drivers/usb/host/ehci-hcd.c > @@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL"); > #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver > #endif > > -#ifdef CONFIG_USB_W90X900_EHCI > -#include "ehci-w90x900.c" > -#define PLATFORM_DRIVER ehci_hcd_w90x900_driver > -#endif > - > #ifdef CONFIG_USB_OCTEON_EHCI > #include "ehci-octeon.c" > #define PLATFORM_DRIVER ehci_octeon_driver > diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c > index 59e0e24..4d6631d 100644 > --- a/drivers/usb/host/ehci-w90x900.c > +++ b/drivers/usb/host/ehci-w90x900.c > @@ -11,13 +11,28 @@ > * > */ > > +#include > +#include > +#include > +#include > +#include > #include > +#include > +#include > + > +#include "ehci.h" > > /* enable phy0 and phy1 for w90p910 */ > #define ENPHY (0x01<<8) > #define PHY0_CTR (0xA4) > #define PHY1_CTR (0xA8) > > +#define DRIVER_DESC "EHCI w90x900 driver" > + > +static const char hcd_name[] = "ehci-w90x900 "; > + > +static struct hc_driver __read_mostly ehci_w90x900_hc_driver; > + > static int usb_w90x900_probe(const struct hc_driver *driver, > struct platform_device *pdev) > { > @@ -99,54 +114,6 @@ void usb_w90x900_remove(struct usb_hcd *hcd, struct platform_device *pdev) > usb_put_hcd(hcd); > } > > -static const struct hc_driver ehci_w90x900_hc_driver = { > - .description = hcd_name, > - .product_desc = "Nuvoton w90x900 EHCI Host Controller", > - .hcd_priv_size = sizeof(struct ehci_hcd), > - > - /* > - * generic hardware linkage > - */ > - .irq = ehci_irq, > - .flags = HCD_USB2|HCD_MEMORY, > - > - /* > - * basic lifecycle operations > - */ > - .reset = ehci_setup, > - .start = ehci_run, > - > - .stop = ehci_stop, > - .shutdown = ehci_shutdown, > - > - /* > - * managing i/o requests and associated device resources > - */ > - .urb_enqueue = ehci_urb_enqueue, > - .urb_dequeue = ehci_urb_dequeue, > - .endpoint_disable = ehci_endpoint_disable, > - .endpoint_reset = ehci_endpoint_reset, > - > - /* > - * scheduling support > - */ > - .get_frame_number = ehci_get_frame, > - > - /* > - * root hub support > - */ > - .hub_status_data = ehci_hub_status_data, > - .hub_control = ehci_hub_control, > -#ifdef CONFIG_PM > - .bus_suspend = ehci_bus_suspend, > - .bus_resume = ehci_bus_resume, > -#endif > - .relinquish_port = ehci_relinquish_port, > - .port_handed_over = ehci_port_handed_over, > - > - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, > -}; > - > static int ehci_w90x900_probe(struct platform_device *pdev) > { > if (usb_disabled()) > @@ -173,7 +140,25 @@ static struct platform_driver ehci_hcd_w90x900_driver = { > }, > }; > > +static int __init ehci_w90X900_init(void) > +{ > + if (usb_disabled()) > + return -ENODEV; > + > + pr_info("%s: " DRIVER_DESC "\n", hcd_name); > + > + ehci_init_driver(&ehci_w90x900_hc_driver, NULL); > + return platform_driver_register(&ehci_hcd_w90x900_driver); > +} > +module_init(ehci_w90X900_init); > + > +static void __exit ehci_w90X900_cleanup(void) > +{ > + platform_driver_unregister(&ehci_hcd_w90x900_driver); > +} > +module_exit(ehci_w90X900_cleanup); > + > +MODULE_DESCRIPTION(DRIVER_DESC); > MODULE_AUTHOR("Wan ZongShun "); > -MODULE_DESCRIPTION("w90p910 usb ehci driver!"); > -MODULE_LICENSE("GPL"); > MODULE_ALIAS("platform:w90p910-ehci"); > +MODULE_LICENSE("GPL v2"); > -- > 1.7.9.5 > -- Wan ZongShun. www.mcuos.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/