Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932539Ab3GZPW2 (ORCPT ); Fri, 26 Jul 2013 11:22:28 -0400 Received: from smtp121.dfw.emailsrvr.com ([67.192.241.121]:40428 "EHLO smtp121.dfw.emailsrvr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932372Ab3GZPWT (ORCPT ); Fri, 26 Jul 2013 11:22:19 -0400 From: Mark Langsdorf To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, tj@kernel.org, devicetree@vger.kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org, ian.campbell@citrix.com, rob.herring@calxeda.com Cc: Mark Langsdorf Subject: [PATCH 4/5] sata, highbank: set tx_atten override bits Date: Fri, 26 Jul 2013 10:11:57 -0500 Message-Id: <1374851518-4802-4-git-send-email-mark.langsdorf@calxeda.com> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1374851518-4802-1-git-send-email-mark.langsdorf@calxeda.com> References: <1374851518-4802-1-git-send-email-mark.langsdorf@calxeda.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5879 Lines: 158 Some board designs do not drive the SATA transmit lines within the specification. The ECME can provide override settings, on a per board basis, to bring the transmit lines within spec. Read those settings from the DTB and program them in. Signed-off-by: Mark Langsdorf --- .../devicetree/bindings/ata/sata_highbank.txt | 2 + drivers/ata/sata_highbank.c | 57 +++++++++++++++++----- 2 files changed, 47 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt index aa1b798..d692e9e 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt @@ -20,6 +20,8 @@ Optional properties: indicator lights using the indicated GPIOs - calxeda,led-order : a u32 array that map port numbers to offsets within the SGPIO bitstream. +- calxeda,tx-atten : a u8 array that contains TX attenuation override + codes, one per port. Example: sata@ffe08000 { diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 8b40025..4c8444f 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -46,14 +46,19 @@ #define CR_BUSY 0x0001 #define CR_START 0x0001 #define CR_WR_RDN 0x0002 +#define CPHY_TX_INPUT_STS 0x2001 #define CPHY_RX_INPUT_STS 0x2002 -#define CPHY_SATA_OVERRIDE 0x4000 -#define CPHY_OVERRIDE 0x2005 +#define CPHY_SATA_TX_OVERRIDE 0x8000 +#define CPHY_SATA_RX_OVERRIDE 0x4000 +#define CPHY_TX_OVERRIDE 0x2004 +#define CPHY_RX_OVERRIDE 0x2005 #define SPHY_LANE 0x100 #define SPHY_HALF_RATE 0x0001 #define CPHY_SATA_DPLL_MODE 0x0700 #define CPHY_SATA_DPLL_SHIFT 8 #define CPHY_SATA_DPLL_RESET (1 << 11) +#define CPHY_SATA_TX_ATTEN 0x1c00 +#define CPHY_SATA_TX_ATTEN_SHIFT 10 #define CPHY_PHY_COUNT 6 #define CPHY_LANE_COUNT 4 #define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) @@ -66,6 +71,7 @@ struct phy_lane_info { void __iomem *phy_base; u8 lane_mapping; u8 phy_devs; + u8 tx_atten; }; static struct phy_lane_info port_data[CPHY_PORT_COUNT]; @@ -259,8 +265,27 @@ static void highbank_cphy_disable_overrides(u8 sata_port) if (unlikely(port_data[sata_port].phy_base == NULL)) return; tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_OVERRIDE; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + tmp &= ~CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_override_tx_attenuation(u8 sata_port, u32 val) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + + if (val & 0x8) + return; + + tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_TX_OVERRIDE; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_TX_OVERRIDE; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); } static void cphy_override_rx_mode(u8 sata_port, u32 val) @@ -268,21 +293,21 @@ static void cphy_override_rx_mode(u8 sata_port, u32 val) u8 lane = port_data[sata_port].lane_mapping; u32 tmp; tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_OVERRIDE; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + tmp &= ~CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - tmp |= CPHY_SATA_OVERRIDE; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + tmp |= CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); tmp &= ~CPHY_SATA_DPLL_MODE; tmp |= val << CPHY_SATA_DPLL_SHIFT; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); tmp |= CPHY_SATA_DPLL_RESET; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); tmp &= ~CPHY_SATA_DPLL_RESET; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); msleep(15); } @@ -299,16 +324,20 @@ static void highbank_cphy_override_lane(u8 sata_port) lane * SPHY_LANE); } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); cphy_override_rx_mode(sata_port, 3); + cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten); } static int highbank_initialize_phys(struct device *dev, void __iomem *addr) { struct device_node *sata_node = dev->of_node; - int phy_count = 0, phy, port = 0; + int phy_count = 0, phy, port = 0, i; void __iomem *cphy_base[CPHY_PHY_COUNT]; struct device_node *phy_nodes[CPHY_PHY_COUNT]; + u32 tx_atten[CPHY_PORT_COUNT]; + memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT); + memset(tx_atten, 0xff, CPHY_PORT_COUNT); do { u32 tmp; @@ -336,6 +365,10 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr) of_node_put(phy_data.np); port += 1; } while (port < CPHY_PORT_COUNT); + of_property_read_u32_array(sata_node, "calxeda,tx-atten", + tx_atten, port); + for (i = 0; i < port; i++) + port_data[i].tx_atten = (u8) tx_atten[i]; return 0; } -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/