Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933805Ab3GZVhj (ORCPT ); Fri, 26 Jul 2013 17:37:39 -0400 Received: from mail-ee0-f45.google.com ([74.125.83.45]:48414 "EHLO mail-ee0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760665Ab3GZVhR (ORCPT ); Fri, 26 Jul 2013 17:37:17 -0400 From: Zubair Lutfullah To: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org Subject: [PATCH] mfd: input: arm: dts: doc: ti_am335x: typo fixes (coordiante -> coordinate) Date: Fri, 26 Jul 2013 22:37:10 +0100 Message-Id: <1374874630-25457-2-git-send-email-zubair.lutfullah@gmail.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1374874630-25457-1-git-send-email-zubair.lutfullah@gmail.com> References: <1374874630-25457-1-git-send-email-zubair.lutfullah@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3281 Lines: 80 Did a grep for 'coordiante' and replaced them all with 'coordinate' Signed-off-by: Zubair Lutfullah Acked-by: Lee Jones --- .../bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++-- arch/arm/boot/dts/am335x-evm.dts | 2 +- drivers/input/touchscreen/ti_am335x_tsc.c | 2 +- drivers/mfd/ti_am335x_tscadc.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt index 491c97b..3e22aec 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -6,7 +6,7 @@ Required properties: ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen support on the platform. ti,x-plate-resistance: X plate resistance - ti,coordiante-readouts: The sequencer supports a total of 16 + ti,coordinate-readouts: The sequencer supports a total of 16 programmable steps each step is used to read a single coordinate. A single readout is enough but multiple reads can @@ -34,7 +34,7 @@ Example: tsc { ti,wires = <4>; ti,x-plate-resistance = <200>; - ti,coordiante-readouts = <5>; + ti,coordinate-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 0fa4c7f..e50b781 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -250,7 +250,7 @@ tsc { ti,wires = <4>; ti,x-plate-resistance = <200>; - ti,coordiante-readouts = <5>; + ti,coordinate-readouts = <5>; ti,wire-config = <0x00 0x11 0x22 0x33>; }; diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 0e9f02a..6422f65 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev, if (err < 0) return err; - err = of_property_read_u32(node, "ti,coordiante-readouts", + err = of_property_read_u32(node, "ti,coordinate-readouts", &ts_dev->coordinate_readouts); if (err < 0) return err; diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index cd74d59..1686ae6 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -106,7 +106,7 @@ static int ti_tscadc_probe(struct platform_device *pdev) node = of_get_child_by_name(pdev->dev.of_node, "tsc"); of_property_read_u32(node, "ti,wires", &tsc_wires); - of_property_read_u32(node, "ti,coordiante-readouts", &readouts); + of_property_read_u32(node, "ti,coordinate-readouts", &readouts); node = of_get_child_by_name(pdev->dev.of_node, "adc"); of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) { -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/