Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751655Ab3G2L0V (ORCPT ); Mon, 29 Jul 2013 07:26:21 -0400 Received: from multi.imgtec.com ([194.200.65.239]:48085 "EHLO multi.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753934Ab3G2LZm (ORCPT ); Mon, 29 Jul 2013 07:25:42 -0400 From: James Hogan To: Mike Turquette , CC: Stephen Boyd , , Saravana Kannan , Doug Anderson , Sylwester Nawrocki , "James Hogan" Subject: [PATCH v6 3/5] clk: add support for clock reparent on set_rate Date: Mon, 29 Jul 2013 12:25:00 +0100 Message-ID: <1375097102-28892-4-git-send-email-james.hogan@imgtec.com> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1375097102-28892-1-git-send-email-james.hogan@imgtec.com> References: <1375097102-28892-1-git-send-email-james.hogan@imgtec.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [192.168.154.65] X-SEF-Processed: 7_3_0_01192__2013_07_29_12_25_40 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15770 Lines: 411 Add core support to allow clock implementations to select the best parent clock when rounding a rate, e.g. the one which can provide the closest clock rate to that requested. This is by way of adding a new clock op, determine_rate(), which is like round_rate() but has an extra parameter to allow the clock implementation to optionally select a different parent clock. The core then takes care of reparenting the clock when setting the rate. The parent change takes place with the help of some new private data members. struct clk::new_parent specifies a clock's new parent (NULL indicates no change), and struct clk::new_child specifies a clock's new child (whose new_parent member points back to it). The purpose of these are to allow correct walking of the future tree for notifications prior to actually reparenting any clocks, specifically to skip child clocks who are being reparented to another clock (they will be notified via the new parent), and to include any new child clock. These pointers are set by clk_calc_subtree(), and the new_child pointer gets cleared when a child is actually reparented to avoid duplicate POST_RATE_CHANGE notifications. Each place where round_rate() is called, determine_rate() is checked first and called in preference. This restructures a few of the call sites to simplify the logic into if/else blocks. Signed-off-by: James Hogan Reviewed-by: Stephen Boyd Cc: Mike Turquette Cc: linux-arm-kernel@lists.infradead.org --- Changes in v5: * Updated clock hardware characteristics table in documentation. Changes in v4: * (not included Stephen Boyd's Reviewed-by due to changes) * replace __clk_set_parent_no_recalc with __clk_set_parent. * never pass NULL to determine_rate's best_parent_clk parameter, and slight refactor of __clk_round_rate to use local copy of clk->parent. * a few new comments around use of clk::new_child. Changes in v3: * rebased on v3.10-rc1. * store new_parent_index in struct clk too (calculated from clk_fetch_parent_index, and passed through __clk_set_parent_no_recalc to __clk_set_parent). * allow determine_rate to satisfy recalc_rate check in __clk_init. Documentation/clk.txt | 46 ++++++++------ drivers/clk/clk.c | 142 +++++++++++++++++++++++++++++-------------- include/linux/clk-private.h | 3 + include/linux/clk-provider.h | 7 +++ 4 files changed, 132 insertions(+), 66 deletions(-) diff --git a/Documentation/clk.txt b/Documentation/clk.txt index 6f68ba0..3aeb5c4 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -70,6 +70,10 @@ the operations defined in clk.h: unsigned long parent_rate); long (*round_rate)(struct clk_hw *hw, unsigned long, unsigned long *); + long (*determine_rate)(struct clk_hw *hw, + unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); int (*set_rate)(struct clk_hw *hw, unsigned long); @@ -179,26 +183,28 @@ mandatory, a cell marked as "n" implies that either including that callback is invalid or otherwise unnecessary. Empty cells are either optional or must be evaluated on a case-by-case basis. - clock hardware characteristics - ----------------------------------------------------------- - | gate | change rate | single parent | multiplexer | root | - |------|-------------|---------------|-------------|------| -.prepare | | | | | | -.unprepare | | | | | | - | | | | | | -.enable | y | | | | | -.disable | y | | | | | -.is_enabled | y | | | | | - | | | | | | -.recalc_rate | | y | | | | -.round_rate | | y | | | | -.set_rate | | y | | | | - | | | | | | -.set_parent | | | n | y | n | -.get_parent | | | n | y | n | - | | | | | | -.init | | | | | | - ----------------------------------------------------------- + clock hardware characteristics + ----------------------------------------------------------- + | gate | change rate | single parent | multiplexer | root | + |------|-------------|---------------|-------------|------| +.prepare | | | | | | +.unprepare | | | | | | + | | | | | | +.enable | y | | | | | +.disable | y | | | | | +.is_enabled | y | | | | | + | | | | | | +.recalc_rate | | y | | | | +.round_rate | | y [1] | | | | +.determine_rate | | y [1] | | | | +.set_rate | | y | | | | + | | | | | | +.set_parent | | | n | y | n | +.get_parent | | | n | y | n | + | | | | | | +.init | | | | | | + ----------------------------------------------------------- +[1] either one of round_rate or determine_rate is required. Finally, register your clock at run-time with a hardware-specific registration function. This function simply populates struct clk_foo's diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index b766db1..2a047a0 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -888,21 +888,24 @@ EXPORT_SYMBOL_GPL(clk_enable); unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) { unsigned long parent_rate = 0; + struct clk *parent; if (!clk) return 0; - if (!clk->ops->round_rate) { - if (clk->flags & CLK_SET_RATE_PARENT) - return __clk_round_rate(clk->parent, rate); - else - return clk->rate; - } - - if (clk->parent) - parent_rate = clk->parent->rate; - - return clk->ops->round_rate(clk->hw, rate, &parent_rate); + parent = clk->parent; + if (parent) + parent_rate = parent->rate; + + if (clk->ops->determine_rate) + return clk->ops->determine_rate(clk->hw, rate, &parent_rate, + &parent); + else if (clk->ops->round_rate) + return clk->ops->round_rate(clk->hw, rate, &parent_rate); + else if (clk->flags & CLK_SET_RATE_PARENT) + return __clk_round_rate(clk->parent, rate); + else + return clk->rate; } /** @@ -1055,6 +1058,10 @@ static u8 clk_fetch_parent_index(struct clk *clk, struct clk *parent) static void clk_reparent(struct clk *clk, struct clk *new_parent) { + /* avoid duplicate POST_RATE_CHANGE notifications */ + if (new_parent->new_child == clk) + new_parent->new_child = NULL; + hlist_del(&clk->child_node); if (new_parent) @@ -1175,18 +1182,25 @@ out: return ret; } -static void clk_calc_subtree(struct clk *clk, unsigned long new_rate) +static void clk_calc_subtree(struct clk *clk, unsigned long new_rate, + struct clk *new_parent, u8 p_index) { struct clk *child; clk->new_rate = new_rate; + clk->new_parent = new_parent; + clk->new_parent_index = p_index; + /* include clk in new parent's PRE_RATE_CHANGE notifications */ + clk->new_child = NULL; + if (new_parent && new_parent != clk->parent) + new_parent->new_child = clk; hlist_for_each_entry(child, &clk->children, child_node) { if (child->ops->recalc_rate) child->new_rate = child->ops->recalc_rate(child->hw, new_rate); else child->new_rate = new_rate; - clk_calc_subtree(child, child->new_rate); + clk_calc_subtree(child, child->new_rate, NULL, 0); } } @@ -1197,50 +1211,63 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate) static struct clk *clk_calc_new_rates(struct clk *clk, unsigned long rate) { struct clk *top = clk; + struct clk *old_parent, *parent; unsigned long best_parent_rate = 0; unsigned long new_rate; + u8 p_index = 0; /* sanity */ if (IS_ERR_OR_NULL(clk)) return NULL; /* save parent rate, if it exists */ - if (clk->parent) - best_parent_rate = clk->parent->rate; - - /* never propagate up to the parent */ - if (!(clk->flags & CLK_SET_RATE_PARENT)) { - if (!clk->ops->round_rate) { - clk->new_rate = clk->rate; - return NULL; - } - new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); + parent = old_parent = clk->parent; + if (parent) + best_parent_rate = parent->rate; + + /* find the closest rate and parent clk/rate */ + if (clk->ops->determine_rate) { + new_rate = clk->ops->determine_rate(clk->hw, rate, + &best_parent_rate, + &parent); + } else if (clk->ops->round_rate) { + new_rate = clk->ops->round_rate(clk->hw, rate, + &best_parent_rate); + } else if (!parent || !(clk->flags & CLK_SET_RATE_PARENT)) { + /* pass-through clock without adjustable parent */ + clk->new_rate = clk->rate; + return NULL; + } else { + /* pass-through clock with adjustable parent */ + top = clk_calc_new_rates(parent, rate); + new_rate = parent->new_rate; goto out; } - /* need clk->parent from here on out */ - if (!clk->parent) { - pr_debug("%s: %s has NULL parent\n", __func__, clk->name); + /* some clocks must be gated to change parent */ + if (parent != old_parent && + (clk->flags & CLK_SET_PARENT_GATE) && clk->prepare_count) { + pr_debug("%s: %s not gated but wants to reparent\n", + __func__, clk->name); return NULL; } - if (!clk->ops->round_rate) { - top = clk_calc_new_rates(clk->parent, rate); - new_rate = clk->parent->new_rate; - - goto out; + /* try finding the new parent index */ + if (parent) { + p_index = clk_fetch_parent_index(clk, parent); + if (p_index == clk->num_parents) { + pr_debug("%s: clk %s can not be parent of clk %s\n", + __func__, parent->name, clk->name); + return NULL; + } } - new_rate = clk->ops->round_rate(clk->hw, rate, &best_parent_rate); - - if (best_parent_rate != clk->parent->rate) { - top = clk_calc_new_rates(clk->parent, best_parent_rate); - - goto out; - } + if ((clk->flags & CLK_SET_RATE_PARENT) && parent && + best_parent_rate != parent->rate) + top = clk_calc_new_rates(parent, best_parent_rate); out: - clk_calc_subtree(clk, new_rate); + clk_calc_subtree(clk, new_rate, parent, p_index); return top; } @@ -1252,7 +1279,7 @@ out: */ static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event) { - struct clk *child, *fail_clk = NULL; + struct clk *child, *tmp_clk, *fail_clk = NULL; int ret = NOTIFY_DONE; if (clk->rate == clk->new_rate) @@ -1265,9 +1292,19 @@ static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long even } hlist_for_each_entry(child, &clk->children, child_node) { - clk = clk_propagate_rate_change(child, event); - if (clk) - fail_clk = clk; + /* Skip children who will be reparented to another clock */ + if (child->new_parent && child->new_parent != clk) + continue; + tmp_clk = clk_propagate_rate_change(child, event); + if (tmp_clk) + fail_clk = tmp_clk; + } + + /* handle the new child who might not be in clk->children yet */ + if (clk->new_child) { + tmp_clk = clk_propagate_rate_change(clk->new_child, event); + if (tmp_clk) + fail_clk = tmp_clk; } return fail_clk; @@ -1285,6 +1322,10 @@ static void clk_change_rate(struct clk *clk) old_rate = clk->rate; + /* set parent */ + if (clk->new_parent && clk->new_parent != clk->parent) + __clk_set_parent(clk, clk->new_parent, clk->new_parent_index); + if (clk->parent) best_parent_rate = clk->parent->rate; @@ -1299,8 +1340,16 @@ static void clk_change_rate(struct clk *clk) if (clk->notifier_count && old_rate != clk->rate) __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); - hlist_for_each_entry(child, &clk->children, child_node) + hlist_for_each_entry(child, &clk->children, child_node) { + /* Skip children who will be reparented to another clock */ + if (child->new_parent && child->new_parent != clk) + continue; clk_change_rate(child); + } + + /* handle the new child who might not be in clk->children yet */ + if (clk->new_child) + clk_change_rate(clk->new_child); } /** @@ -1551,8 +1600,9 @@ int __clk_init(struct device *dev, struct clk *clk) /* check that clk_ops are sane. See Documentation/clk.txt */ if (clk->ops->set_rate && - !(clk->ops->round_rate && clk->ops->recalc_rate)) { - pr_warning("%s: %s must implement .round_rate & .recalc_rate\n", + !((clk->ops->round_rate || clk->ops->determine_rate) && + clk->ops->recalc_rate)) { + pr_warning("%s: %s must implement .round_rate or .determine_rate in addition to .recalc_rate\n", __func__, clk->name); ret = -EINVAL; goto out; diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index dd7adff..8138c94 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -33,8 +33,11 @@ struct clk { const char **parent_names; struct clk **parents; u8 num_parents; + u8 new_parent_index; unsigned long rate; unsigned long new_rate; + struct clk *new_parent; + struct clk *new_child; unsigned long flags; unsigned int enable_count; unsigned int prepare_count; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index e54dac5..d37e518 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -79,6 +79,10 @@ struct clk_hw; * @round_rate: Given a target rate as input, returns the closest rate actually * supported by the clock. * + * @determine_rate: Given a target rate as input, returns the closest rate + * actually supported by the clock, and optionally the parent clock + * that should be used to provide the clock rate. + * * @get_parent: Queries the hardware to determine the parent of a clock. The * return value is a u8 which specifies the index corresponding to * the parent clock. This index can be applied to either the @@ -126,6 +130,9 @@ struct clk_ops { unsigned long parent_rate); long (*round_rate)(struct clk_hw *hw, unsigned long, unsigned long *); + long (*determine_rate)(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); int (*set_rate)(struct clk_hw *hw, unsigned long, -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/