Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 1 Feb 2001 01:31:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 1 Feb 2001 01:31:37 -0500 Received: from styx.suse.cz ([195.70.145.226]:18423 "EHLO kerberos.suse.cz") by vger.kernel.org with ESMTP id ; Thu, 1 Feb 2001 01:31:32 -0500 Date: Thu, 1 Feb 2001 07:31:26 +0100 From: Vojtech Pavlik To: safemode Cc: Tobias Ringstrom , Mark Hahn , David Raufeisen , linux-kernel@vger.kernel.org Subject: Re: VT82C686A corruption with 2.4.x Message-ID: <20010201073126.A285@suse.cz> In-Reply-To: <3A789869.B05506FB@voicenet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A789869.B05506FB@voicenet.com>; from safemode@voicenet.com on Wed, Jan 31, 2001 at 05:57:45PM -0500 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Jan 31, 2001 at 05:57:45PM -0500, safemode wrote: > Alan Cox wrote: > > > > better than i ever got with 2.4 even when only one drive was on a channel. > > > Right now my k7-2 750 is at 849mhz with a FSB of 114Mhz and PCI at 34Mhz. > > > > Hint: people who overclock machines get suprising odd results and bad stuff > > happens. Please dont waste developers time unless you can reproduce it at > > the intended speed for the components > > Like i said .. i just did that within the last 5 min it has nothing to do > with any problems i've been talking about Btw, if you run your FSB at 114 MHz, you need to pass 'idebus=38' to the IDE driver so that it knows your PCI bus runs at 38 MHz (3x38 = 114). Otherwise you'll get incorrect timing etc. -- Vojtech Pavlik SuSE Labs - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/