Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754587Ab3G3NFc (ORCPT ); Tue, 30 Jul 2013 09:05:32 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:46311 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752601Ab3G3NF1 (ORCPT ); Tue, 30 Jul 2013 09:05:27 -0400 From: Luciano Coelho To: , , CC: , , , , , , , , , , , , , Subject: [PATCH v4 0/8] wilink: add device tree support Date: Tue, 30 Jul 2013 16:04:28 +0300 Message-ID: <1375189476-21557-1-git-send-email-coelho@ti.com> X-Mailer: git-send-email 1.8.3.2 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3137 Lines: 77 Hi, This patch series adds device tree support to the wlcore_sdio driver, which is used by WiLink6, WiLink7 and WiLink8. The first patches do some clean-up to make the data needed in the wilink device tree node smaller. The remaining patches implement the actual device tree node parsing in wlcore_sdio. Regarding the XTAL clock issues, for now we don't support XTAL mode with DT, but I have sent a proposal for a small change in the clock framework to support this, but it's still under discussions [1]. The DTS file changes will be sent separately, since they need to go via different trees. A new version of the bindings documentation has been sent [2] and, if no more comments are given to it, I'll apply it via my tree. [1] http://news.gmane.org/find-root.php?message_id=1372971912-10877-1-git-send-email-coelho@ti.com [2] http://news.gmane.org/find-root.php?message_id=1375109728-5931-1-git-send-email-coelho@ti.com Changes in v4: * Rebased on top of 3.11-rc3 (eg. no more changes on the board files that were removed); * Use the new irq_get_trigger_type() instead of irqd_get_trigger_type() (thanks Javier); * Added some missing const's (thanks Felipe); * Reverted Tony's workaround to get WiLink to work on Panda while DT was not supported yet. Please review. Luciano Coelho (8): wl1251: split wl251 platform data to a separate structure wlcore: set irq_flags in the board files instead of hiding behind a quirk wlcore: remove pwr_in_suspend from platform data wl12xx: use frequency instead of enumerations for pdata clocks wlcore: add initial device tree support to the sdio module wlcore: sdio: add wilink clock providers wlcore: sdio: get clocks from device tree wlcore/wl12xx: check if we got correct clock data from DT arch/arm/mach-davinci/board-da850-evm.c | 11 ++- arch/arm/mach-omap2/board-omap3evm.c | 22 ++++- arch/arm/mach-omap2/board-omap3pandora.c | 4 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 33 +++++++- arch/arm/mach-omap2/devices.c | 39 --------- drivers/net/wireless/ti/wilink_platform_data.c | 37 ++++++-- drivers/net/wireless/ti/wl1251/sdio.c | 12 +-- drivers/net/wireless/ti/wl1251/spi.c | 2 +- drivers/net/wireless/ti/wl12xx/main.c | 78 +++++++++++++++-- drivers/net/wireless/ti/wl12xx/wl12xx.h | 28 +++++++ drivers/net/wireless/ti/wlcore/debugfs.c | 2 +- drivers/net/wireless/ti/wlcore/main.c | 20 ++--- drivers/net/wireless/ti/wlcore/sdio.c | 112 +++++++++++++++++++++++-- drivers/net/wireless/ti/wlcore/wlcore.h | 5 +- drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 + include/linux/wl12xx.h | 52 +++++------- 17 files changed, 340 insertions(+), 120 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/