Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757543Ab3G3UQ6 (ORCPT ); Tue, 30 Jul 2013 16:16:58 -0400 Received: from www.linutronix.de ([62.245.132.108]:58492 "EHLO Galois.linutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756821Ab3G3UQv (ORCPT ); Tue, 30 Jul 2013 16:16:51 -0400 From: Sebastian Andrzej Siewior To: linux-usb@vger.kernel.org Cc: balbi@ti.com, linux-kernel@vger.kernel.org, george.cherian@ti.com, Sebastian Andrzej Siewior Subject: [PATCH 1/5] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv Date: Tue, 30 Jul 2013 22:16:37 +0200 Message-Id: <1375215401-19729-2-git-send-email-bigeasy@linutronix.de> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1375215401-19729-1-git-send-email-bigeasy@linutronix.de> References: <1375215401-19729-1-git-send-email-bigeasy@linutronix.de> X-Linutronix-Spam-Score: -1.0 X-Linutronix-Spam-Level: - X-Linutronix-Spam-Status: No , -1.0 points, 5.0 required, ALL_TRUSTED=-1,SHORTCIRCUIT=-0.0001,URIBL_BLOCKED=0.001 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 27175 Lines: 963 The "nop" driver isn't a do-nothing-stub but supports a couple functions like clock on/off or is able to use a voltage regulator. This patch simply renames the driver to "generic" since it is easy possible to extend it by a simple function istead of writing a complete driver. Signed-off-by: Sebastian Andrzej Siewior --- arch/arm/mach-omap2/board-omap3beagle.c | 4 +- arch/arm/mach-omap2/board-omap3evm.c | 4 +- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/usb-host.c | 10 +- drivers/usb/dwc3/dwc3-exynos.c | 8 +- drivers/usb/dwc3/dwc3-pci.c | 8 +- drivers/usb/musb/am35x.c | 2 +- drivers/usb/musb/blackfin.c | 2 +- drivers/usb/musb/da8xx.c | 2 +- drivers/usb/musb/davinci.c | 2 +- drivers/usb/musb/musb_dsps.c | 2 +- drivers/usb/musb/tusb6010.c | 2 +- drivers/usb/phy/Makefile | 2 +- drivers/usb/phy/phy-generic.c | 292 +++++++++++++++++++++++++++++++ drivers/usb/phy/phy-nop.c | 292 ------------------------------- include/linux/usb/nop-usb-xceiv.h | 29 --- include/linux/usb/usb_phy_gen_xceiv.h | 29 +++ 17 files changed, 346 insertions(+), 346 deletions(-) create mode 100644 drivers/usb/phy/phy-generic.c delete mode 100644 drivers/usb/phy/phy-nop.c delete mode 100644 include/linux/usb/nop-usb-xceiv.h create mode 100644 include/linux/usb/usb_phy_gen_xceiv.h diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 04c1165..1c6ae5f 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -279,7 +279,7 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; /* PHY's VCC regulator might be added later, so flag that we need it */ -static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { +static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = { .needs_vcc = true, }; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 8c02626..52bdddd 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include @@ -468,7 +468,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b1547a0..d2b455e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -352,7 +352,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ + REGULATOR_SUPPLY("vcc", "usb_phy_gen_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 2eb19d4..e83a6a4 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include "soc.h" #include "omap_device.h" @@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = { /* .init_data filled later */ }; -static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */ static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ /** @@ -460,9 +460,9 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) pdevinfo.name = nop_name; pdevinfo.id = phy->port; pdevinfo.data = phy->platform_data; - pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data); - - scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d", + pdevinfo.size_data = + sizeof(struct usb_phy_gen_xceiv_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", phy->port); pdev = platform_device_register_full(&pdevinfo); if (IS_ERR(pdev)) { diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 9a8a5e1..2f2e88a 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include @@ -38,13 +38,13 @@ struct dwc3_exynos { static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) { - struct nop_usb_xceiv_platform_data pdata; + struct usb_phy_gen_xceiv_platform_data pdata; struct platform_device *pdev; int ret; memset(&pdata, 0x00, sizeof(pdata)); - pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); + pdev = platform_device_alloc("usb_phy_gen_xceiv", PLATFORM_DEVID_AUTO); if (!pdev) return -ENOMEM; @@ -55,7 +55,7 @@ static int dwc3_exynos_register_phys(struct dwc3_exynos *exynos) if (ret) goto err1; - pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); + pdev = platform_device_alloc("usb_phy_gen_xceiv", PLATFORM_DEVID_AUTO); if (!pdev) { ret = -ENOMEM; goto err1; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 5d746e5..6f5ac34 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -23,7 +23,7 @@ #include #include -#include +#include /* FIXME define these in */ #define PCI_VENDOR_ID_SYNOPSYS 0x16c3 @@ -38,13 +38,13 @@ struct dwc3_pci { static int dwc3_pci_register_phys(struct dwc3_pci *glue) { - struct nop_usb_xceiv_platform_data pdata; + struct usb_phy_gen_xceiv_platform_data pdata; struct platform_device *pdev; int ret; memset(&pdata, 0x00, sizeof(pdata)); - pdev = platform_device_alloc("nop_usb_xceiv", 0); + pdev = platform_device_alloc("usb_phy_gen_xceiv", 0); if (!pdev) return -ENOMEM; @@ -55,7 +55,7 @@ static int dwc3_pci_register_phys(struct dwc3_pci *glue) if (ret) goto err1; - pdev = platform_device_alloc("nop_usb_xceiv", 1); + pdev = platform_device_alloc("usb_phy_gen_xceiv", 1); if (!pdev) { ret = -ENOMEM; goto err1; diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 2231850..5733a20 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include "musb_core.h" diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 6ba8439..195e966 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 0da6f64..ccc6b63 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index f8aeaf2..91f300e 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 23f511f..05c2a02 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 6f8a9ca..c642f09 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include "musb_core.h" diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 070eca3..24c5816 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -14,7 +14,7 @@ phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o -obj-$(CONFIG_NOP_USB_XCEIV) += phy-nop.o +obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c new file mode 100644 index 0000000..f379b7d --- /dev/null +++ b/drivers/usb/phy/phy-generic.c @@ -0,0 +1,292 @@ +/* + * drivers/usb/otg/nop-usb-xceiv.c + * + * NOP USB transceiver for all USB transceiver which are either built-in + * into USB IP or which are mostly autonomous. + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Ajay Kumar Gupta + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * This provides a "nop" transceiver for PHYs which are + * autonomous such as isp1504, isp1707, etc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct usb_phy_gen_xceiv { + struct usb_phy phy; + struct device *dev; + struct clk *clk; + struct regulator *vcc; + struct regulator *reset; +}; + +static struct platform_device *pd; + +void usb_nop_xceiv_register(void) +{ + if (pd) + return; + pd = platform_device_register_simple("usb_phy_gen_xceiv", -1, NULL, 0); + if (!pd) { + pr_err("Unable to register generic usb transceiver\n"); + return; + } +} +EXPORT_SYMBOL(usb_nop_xceiv_register); + +void usb_nop_xceiv_unregister(void) +{ + platform_device_unregister(pd); + pd = NULL; +} +EXPORT_SYMBOL(usb_nop_xceiv_unregister); + +static int nop_set_suspend(struct usb_phy *x, int suspend) +{ + return 0; +} + +static int nop_init(struct usb_phy *phy) +{ + struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev); + + if (!IS_ERR(nop->vcc)) { + if (regulator_enable(nop->vcc)) + dev_err(phy->dev, "Failed to enable power\n"); + } + + if (!IS_ERR(nop->clk)) + clk_enable(nop->clk); + + if (!IS_ERR(nop->reset)) { + /* De-assert RESET */ + if (regulator_enable(nop->reset)) + dev_err(phy->dev, "Failed to de-assert reset\n"); + } + + return 0; +} + +static void nop_shutdown(struct usb_phy *phy) +{ + struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev); + + if (!IS_ERR(nop->reset)) { + /* Assert RESET */ + if (regulator_disable(nop->reset)) + dev_err(phy->dev, "Failed to assert reset\n"); + } + + if (!IS_ERR(nop->clk)) + clk_disable(nop->clk); + + if (!IS_ERR(nop->vcc)) { + if (regulator_disable(nop->vcc)) + dev_err(phy->dev, "Failed to disable power\n"); + } +} + +static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + if (!gadget) { + otg->gadget = NULL; + return -ENODEV; + } + + otg->gadget = gadget; + otg->phy->state = OTG_STATE_B_IDLE; + return 0; +} + +static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!host) { + otg->host = NULL; + return -ENODEV; + } + + otg->host = host; + return 0; +} + +static int usb_phy_gen_xceiv_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usb_phy_gen_xceiv_platform_data *pdata = pdev->dev.platform_data; + struct usb_phy_gen_xceiv *nop; + enum usb_phy_type type = USB_PHY_TYPE_USB2; + int err; + u32 clk_rate = 0; + bool needs_vcc = false; + bool needs_reset = false; + + nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL); + if (!nop) + return -ENOMEM; + + nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg), + GFP_KERNEL); + if (!nop->phy.otg) + return -ENOMEM; + + if (dev->of_node) { + struct device_node *node = dev->of_node; + + if (of_property_read_u32(node, "clock-frequency", &clk_rate)) + clk_rate = 0; + + needs_vcc = of_property_read_bool(node, "vcc-supply"); + needs_reset = of_property_read_bool(node, "reset-supply"); + + } else if (pdata) { + type = pdata->type; + clk_rate = pdata->clk_rate; + needs_vcc = pdata->needs_vcc; + needs_reset = pdata->needs_reset; + } + + nop->clk = devm_clk_get(&pdev->dev, "main_clk"); + if (IS_ERR(nop->clk)) { + dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n", + PTR_ERR(nop->clk)); + } + + if (!IS_ERR(nop->clk) && clk_rate) { + err = clk_set_rate(nop->clk, clk_rate); + if (err) { + dev_err(&pdev->dev, "Error setting clock rate\n"); + return err; + } + } + + if (!IS_ERR(nop->clk)) { + err = clk_prepare(nop->clk); + if (err) { + dev_err(&pdev->dev, "Error preparing clock\n"); + return err; + } + } + + nop->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(nop->vcc)) { + dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n", + PTR_ERR(nop->vcc)); + if (needs_vcc) + return -EPROBE_DEFER; + } + + nop->reset = devm_regulator_get(&pdev->dev, "reset"); + if (IS_ERR(nop->reset)) { + dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n", + PTR_ERR(nop->reset)); + if (needs_reset) + return -EPROBE_DEFER; + } + + nop->dev = &pdev->dev; + nop->phy.dev = nop->dev; + nop->phy.label = "nop-xceiv"; + nop->phy.set_suspend = nop_set_suspend; + nop->phy.init = nop_init; + nop->phy.shutdown = nop_shutdown; + nop->phy.state = OTG_STATE_UNDEFINED; + nop->phy.type = type; + + nop->phy.otg->phy = &nop->phy; + nop->phy.otg->set_host = nop_set_host; + nop->phy.otg->set_peripheral = nop_set_peripheral; + + err = usb_add_phy_dev(&nop->phy); + if (err) { + dev_err(&pdev->dev, "can't register transceiver, err: %d\n", + err); + goto err_add; + } + + platform_set_drvdata(pdev, nop); + + ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier); + + return 0; + +err_add: + if (!IS_ERR(nop->clk)) + clk_unprepare(nop->clk); + return err; +} + +static int usb_phy_gen_xceiv_remove(struct platform_device *pdev) +{ + struct usb_phy_gen_xceiv *nop = platform_get_drvdata(pdev); + + if (!IS_ERR(nop->clk)) + clk_unprepare(nop->clk); + + usb_remove_phy(&nop->phy); + + return 0; +} + +static const struct of_device_id nop_xceiv_dt_ids[] = { + { .compatible = "usb-nop-xceiv" }, + { } +}; + +MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); + +static struct platform_driver usb_phy_gen_xceiv_driver = { + .probe = usb_phy_gen_xceiv_probe, + .remove = usb_phy_gen_xceiv_remove, + .driver = { + .name = "usb_phy_gen_xceiv", + .owner = THIS_MODULE, + .of_match_table = nop_xceiv_dt_ids, + }, +}; + +static int __init usb_phy_gen_xceiv_init(void) +{ + return platform_driver_register(&usb_phy_gen_xceiv_driver); +} +subsys_initcall(usb_phy_gen_xceiv_init); + +static void __exit usb_phy_gen_xceiv_exit(void) +{ + platform_driver_unregister(&usb_phy_gen_xceiv_driver); +} +module_exit(usb_phy_gen_xceiv_exit); + +MODULE_ALIAS("platform:usb_phy_gen_xceiv"); +MODULE_AUTHOR("Texas Instruments Inc"); +MODULE_DESCRIPTION("NOP USB Transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c deleted file mode 100644 index 55445e5d..0000000 --- a/drivers/usb/phy/phy-nop.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * drivers/usb/otg/nop-usb-xceiv.c - * - * NOP USB transceiver for all USB transceiver which are either built-in - * into USB IP or which are mostly autonomous. - * - * Copyright (C) 2009 Texas Instruments Inc - * Author: Ajay Kumar Gupta - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Current status: - * This provides a "nop" transceiver for PHYs which are - * autonomous such as isp1504, isp1707, etc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct nop_usb_xceiv { - struct usb_phy phy; - struct device *dev; - struct clk *clk; - struct regulator *vcc; - struct regulator *reset; -}; - -static struct platform_device *pd; - -void usb_nop_xceiv_register(void) -{ - if (pd) - return; - pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0); - if (!pd) { - printk(KERN_ERR "Unable to register usb nop transceiver\n"); - return; - } -} -EXPORT_SYMBOL(usb_nop_xceiv_register); - -void usb_nop_xceiv_unregister(void) -{ - platform_device_unregister(pd); - pd = NULL; -} -EXPORT_SYMBOL(usb_nop_xceiv_unregister); - -static int nop_set_suspend(struct usb_phy *x, int suspend) -{ - return 0; -} - -static int nop_init(struct usb_phy *phy) -{ - struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); - - if (!IS_ERR(nop->vcc)) { - if (regulator_enable(nop->vcc)) - dev_err(phy->dev, "Failed to enable power\n"); - } - - if (!IS_ERR(nop->clk)) - clk_enable(nop->clk); - - if (!IS_ERR(nop->reset)) { - /* De-assert RESET */ - if (regulator_enable(nop->reset)) - dev_err(phy->dev, "Failed to de-assert reset\n"); - } - - return 0; -} - -static void nop_shutdown(struct usb_phy *phy) -{ - struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); - - if (!IS_ERR(nop->reset)) { - /* Assert RESET */ - if (regulator_disable(nop->reset)) - dev_err(phy->dev, "Failed to assert reset\n"); - } - - if (!IS_ERR(nop->clk)) - clk_disable(nop->clk); - - if (!IS_ERR(nop->vcc)) { - if (regulator_disable(nop->vcc)) - dev_err(phy->dev, "Failed to disable power\n"); - } -} - -static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) -{ - if (!otg) - return -ENODEV; - - if (!gadget) { - otg->gadget = NULL; - return -ENODEV; - } - - otg->gadget = gadget; - otg->phy->state = OTG_STATE_B_IDLE; - return 0; -} - -static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - if (!host) { - otg->host = NULL; - return -ENODEV; - } - - otg->host = host; - return 0; -} - -static int nop_usb_xceiv_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; - struct nop_usb_xceiv *nop; - enum usb_phy_type type = USB_PHY_TYPE_USB2; - int err; - u32 clk_rate = 0; - bool needs_vcc = false; - bool needs_reset = false; - - nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL); - if (!nop) - return -ENOMEM; - - nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg), - GFP_KERNEL); - if (!nop->phy.otg) - return -ENOMEM; - - if (dev->of_node) { - struct device_node *node = dev->of_node; - - if (of_property_read_u32(node, "clock-frequency", &clk_rate)) - clk_rate = 0; - - needs_vcc = of_property_read_bool(node, "vcc-supply"); - needs_reset = of_property_read_bool(node, "reset-supply"); - - } else if (pdata) { - type = pdata->type; - clk_rate = pdata->clk_rate; - needs_vcc = pdata->needs_vcc; - needs_reset = pdata->needs_reset; - } - - nop->clk = devm_clk_get(&pdev->dev, "main_clk"); - if (IS_ERR(nop->clk)) { - dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n", - PTR_ERR(nop->clk)); - } - - if (!IS_ERR(nop->clk) && clk_rate) { - err = clk_set_rate(nop->clk, clk_rate); - if (err) { - dev_err(&pdev->dev, "Error setting clock rate\n"); - return err; - } - } - - if (!IS_ERR(nop->clk)) { - err = clk_prepare(nop->clk); - if (err) { - dev_err(&pdev->dev, "Error preparing clock\n"); - return err; - } - } - - nop->vcc = devm_regulator_get(&pdev->dev, "vcc"); - if (IS_ERR(nop->vcc)) { - dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n", - PTR_ERR(nop->vcc)); - if (needs_vcc) - return -EPROBE_DEFER; - } - - nop->reset = devm_regulator_get(&pdev->dev, "reset"); - if (IS_ERR(nop->reset)) { - dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n", - PTR_ERR(nop->reset)); - if (needs_reset) - return -EPROBE_DEFER; - } - - nop->dev = &pdev->dev; - nop->phy.dev = nop->dev; - nop->phy.label = "nop-xceiv"; - nop->phy.set_suspend = nop_set_suspend; - nop->phy.init = nop_init; - nop->phy.shutdown = nop_shutdown; - nop->phy.state = OTG_STATE_UNDEFINED; - nop->phy.type = type; - - nop->phy.otg->phy = &nop->phy; - nop->phy.otg->set_host = nop_set_host; - nop->phy.otg->set_peripheral = nop_set_peripheral; - - err = usb_add_phy_dev(&nop->phy); - if (err) { - dev_err(&pdev->dev, "can't register transceiver, err: %d\n", - err); - goto err_add; - } - - platform_set_drvdata(pdev, nop); - - ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier); - - return 0; - -err_add: - if (!IS_ERR(nop->clk)) - clk_unprepare(nop->clk); - return err; -} - -static int nop_usb_xceiv_remove(struct platform_device *pdev) -{ - struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); - - if (!IS_ERR(nop->clk)) - clk_unprepare(nop->clk); - - usb_remove_phy(&nop->phy); - - return 0; -} - -static const struct of_device_id nop_xceiv_dt_ids[] = { - { .compatible = "usb-nop-xceiv" }, - { } -}; - -MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); - -static struct platform_driver nop_usb_xceiv_driver = { - .probe = nop_usb_xceiv_probe, - .remove = nop_usb_xceiv_remove, - .driver = { - .name = "nop_usb_xceiv", - .owner = THIS_MODULE, - .of_match_table = nop_xceiv_dt_ids, - }, -}; - -static int __init nop_usb_xceiv_init(void) -{ - return platform_driver_register(&nop_usb_xceiv_driver); -} -subsys_initcall(nop_usb_xceiv_init); - -static void __exit nop_usb_xceiv_exit(void) -{ - platform_driver_unregister(&nop_usb_xceiv_driver); -} -module_exit(nop_usb_xceiv_exit); - -MODULE_ALIAS("platform:nop_usb_xceiv"); -MODULE_AUTHOR("Texas Instruments Inc"); -MODULE_DESCRIPTION("NOP USB Transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h deleted file mode 100644 index 148d351..0000000 --- a/include/linux/usb/nop-usb-xceiv.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __LINUX_USB_NOP_XCEIV_H -#define __LINUX_USB_NOP_XCEIV_H - -#include - -struct nop_usb_xceiv_platform_data { - enum usb_phy_type type; - unsigned long clk_rate; - - /* if set fails with -EPROBE_DEFER if can't get regulator */ - unsigned int needs_vcc:1; - unsigned int needs_reset:1; -}; - -#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) -/* sometimes transceivers are accessed only through e.g. ULPI */ -extern void usb_nop_xceiv_register(void); -extern void usb_nop_xceiv_unregister(void); -#else -static inline void usb_nop_xceiv_register(void) -{ -} - -static inline void usb_nop_xceiv_unregister(void) -{ -} -#endif - -#endif /* __LINUX_USB_NOP_XCEIV_H */ diff --git a/include/linux/usb/usb_phy_gen_xceiv.h b/include/linux/usb/usb_phy_gen_xceiv.h new file mode 100644 index 0000000..f9a7e7b --- /dev/null +++ b/include/linux/usb/usb_phy_gen_xceiv.h @@ -0,0 +1,29 @@ +#ifndef __LINUX_USB_NOP_XCEIV_H +#define __LINUX_USB_NOP_XCEIV_H + +#include + +struct usb_phy_gen_xceiv_platform_data { + enum usb_phy_type type; + unsigned long clk_rate; + + /* if set fails with -EPROBE_DEFER if can't get regulator */ + unsigned int needs_vcc:1; + unsigned int needs_reset:1; +}; + +#if IS_ENABLED(CONFIG_NOP_USB_XCEIV) +/* sometimes transceivers are accessed only through e.g. ULPI */ +extern void usb_nop_xceiv_register(void); +extern void usb_nop_xceiv_unregister(void); +#else +static inline void usb_nop_xceiv_register(void) +{ +} + +static inline void usb_nop_xceiv_unregister(void) +{ +} +#endif + +#endif /* __LINUX_USB_NOP_XCEIV_H */ -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/