Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758098Ab3HAXrn (ORCPT ); Thu, 1 Aug 2013 19:47:43 -0400 Received: from mail-ob0-f182.google.com ([209.85.214.182]:53462 "EHLO mail-ob0-f182.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757880Ab3HAXrj (ORCPT ); Thu, 1 Aug 2013 19:47:39 -0400 From: Felipe Contreras To: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org Cc: "Rafael J. Wysocki" , Len Brown , Zhang Rui , Jiri Kosina , Felipe Contreras Subject: [PATCH 1/3] acpi: video: trivial costmetic cleanups Date: Thu, 1 Aug 2013 18:43:59 -0500 Message-Id: <1375400641-1694-2-git-send-email-felipe.contreras@gmail.com> X-Mailer: git-send-email 1.8.3.4 In-Reply-To: <1375400641-1694-1-git-send-email-felipe.contreras@gmail.com> References: <1375400641-1694-1-git-send-email-felipe.contreras@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9091 Lines: 269 Signed-off-by: Felipe Contreras --- drivers/acpi/video.c | 114 +++++++++++++++++++++++++++------------------------ 1 file changed, 61 insertions(+), 53 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 0ec434d..f021bf4 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1,5 +1,5 @@ /* - * video.c - ACPI Video Driver ($Revision:$) + * video.c - ACPI Video Driver * * Copyright (C) 2004 Luming Yu * Copyright (C) 2004 Bruno Ducrot @@ -118,26 +118,26 @@ struct acpi_video_bus_flags { }; struct acpi_video_bus_cap { - u8 _DOS:1; /*Enable/Disable output switching */ - u8 _DOD:1; /*Enumerate all devices attached to display adapter */ - u8 _ROM:1; /*Get ROM Data */ - u8 _GPD:1; /*Get POST Device */ - u8 _SPD:1; /*Set POST Device */ - u8 _VPO:1; /*Video POST Options */ + u8 _DOS:1; /* Enable/Disable output switching */ + u8 _DOD:1; /* Enumerate all devices attached to display adapter */ + u8 _ROM:1; /* Get ROM Data */ + u8 _GPD:1; /* Get POST Device */ + u8 _SPD:1; /* Set POST Device */ + u8 _VPO:1; /* Video POST Options */ u8 reserved:2; }; struct acpi_video_device_attrib { u32 display_index:4; /* A zero-based instance of the Display */ - u32 display_port_attachment:4; /*This field differentiates the display type */ - u32 display_type:4; /*Describe the specific type in use */ - u32 vendor_specific:4; /*Chipset Vendor Specific */ - u32 bios_can_detect:1; /*BIOS can detect the device */ - u32 depend_on_vga:1; /*Non-VGA output device whose power is related to + u32 display_port_attachment:4; /* This field differentiates the display type */ + u32 display_type:4; /* Describe the specific type in use */ + u32 vendor_specific:4; /* Chipset Vendor Specific */ + u32 bios_can_detect:1; /* BIOS can detect the device */ + u32 depend_on_vga:1; /* Non-VGA output device whose power is related to the VGA device. */ - u32 pipe_id:3; /*For VGA multiple-head devices. */ - u32 reserved:10; /*Must be 0 */ - u32 device_id_scheme:1; /*Device ID Scheme */ + u32 pipe_id:3; /* For VGA multiple-head devices. */ + u32 reserved:10; /* Must be 0 */ + u32 device_id_scheme:1; /* Device ID Scheme */ }; struct acpi_video_enumerated_device { @@ -174,17 +174,17 @@ struct acpi_video_device_flags { }; struct acpi_video_device_cap { - u8 _ADR:1; /*Return the unique ID */ - u8 _BCL:1; /*Query list of brightness control levels supported */ - u8 _BCM:1; /*Set the brightness level */ + u8 _ADR:1; /* Return the unique ID */ + u8 _BCL:1; /* Query list of brightness control levels supported */ + u8 _BCM:1; /* Set the brightness level */ u8 _BQC:1; /* Get current brightness level */ u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */ - u8 _DDC:1; /*Return the EDID for this device */ + u8 _DDC:1; /* Return the EDID for this device */ }; struct acpi_video_brightness_flags { u8 _BCL_no_ac_battery_levels:1; /* no AC/Battery levels in _BCL */ - u8 _BCL_reversed:1; /* _BCL package is in a reversed order*/ + u8 _BCL_reversed:1; /* _BCL package is in a reversed order */ u8 _BCL_use_index:1; /* levels in _BCL are index values */ u8 _BCM_use_index:1; /* input of _BCM is an index value */ u8 _BQC_use_index:1; /* _BQC returns an index value */ @@ -231,7 +231,7 @@ static int acpi_video_get_next_level(struct acpi_video_device *device, static int acpi_video_switch_brightness(struct acpi_video_device *device, int event); -/*backlight device sysfs support*/ +/* backlight device sysfs support */ static int acpi_video_get_brightness(struct backlight_device *bd) { unsigned long long cur_level; @@ -243,8 +243,10 @@ static int acpi_video_get_brightness(struct backlight_device *bd) return -EINVAL; for (i = 2; i < vd->brightness->count; i++) { if (vd->brightness->levels[i] == cur_level) - /* The first two entries are special - see page 575 - of the ACPI spec 3.0 */ + /* + * The first two entries are special - see page 575 + * of the ACPI spec 3.0 + */ return i-2; } return 0; @@ -316,9 +318,11 @@ static const struct thermal_cooling_device_ops video_cooling_ops = { .set_cur_state = video_set_cur_state, }; -/* -------------------------------------------------------------------------- - Video Management - -------------------------------------------------------------------------- */ +/* + * -------------------------------------------------------------------------- + * Video Management + * -------------------------------------------------------------------------- + */ static int acpi_video_device_lcd_query_levels(struct acpi_video_device *device, @@ -556,7 +560,8 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, buf)); device->cap._BQC = device->cap._BCQ = 0; } else { - /* Fixme: + /* + * Fixme: * should we return an error or ignore this failure? * dev->brightness->curr is a cached value which stores * the correct current backlight level in most cases. @@ -615,8 +620,8 @@ acpi_video_device_EDID(struct acpi_video_device *device, /* * Arg: - * video : video bus device pointer - * bios_flag : + * video : video bus device pointer + * bios_flag : * 0. The system BIOS should NOT automatically switch(toggle) * the active display output. * 1. The system BIOS should automatically switch (toggle) the @@ -628,9 +633,9 @@ acpi_video_device_EDID(struct acpi_video_device *device, * lcd_flag : * 0. The system BIOS should automatically control the brightness level * of the LCD when the power changes from AC to DC - * 1. The system BIOS should NOT automatically control the brightness + * 1. The system BIOS should NOT automatically control the brightness * level of the LCD when the power changes from AC to DC. - * Return Value: + * Return Value: * -EINVAL wrong arg. */ @@ -717,8 +722,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device, /* - * Arg: - * device : video output device (LCD, CRT, ..) + * Arg: + * device : video output device (LCD, CRT, ..) * * Return Value: * Maximum brightness level @@ -877,7 +882,7 @@ out: * device : video output device (LCD, CRT, ..) * * Return Value: - * None + * None * * Find out all required AML methods defined under the output * device. @@ -988,11 +993,11 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) } /* - * Arg: - * device : video output device (VGA) + * Arg: + * device : video output device (VGA) * * Return Value: - * None + * None * * Find out all required AML methods defined under the video bus device. */ @@ -1039,7 +1044,8 @@ static int acpi_video_bus_check(struct acpi_video_bus *video) return -ENODEV; pci_dev_put(dev); - /* Since there is no HID, CID and so on for VGA driver, we have + /* + * Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ @@ -1069,9 +1075,11 @@ static int acpi_video_bus_check(struct acpi_video_bus *video) return status; } -/* -------------------------------------------------------------------------- - Driver Interface - -------------------------------------------------------------------------- */ +/* + * -------------------------------------------------------------------------- + * Driver Interface + * -------------------------------------------------------------------------- + */ /* device interface */ static struct acpi_video_device_attrib* @@ -1192,12 +1200,12 @@ acpi_video_bus_get_one_device(struct acpi_device *device, /* * Arg: - * video : video bus device + * video : video bus device * * Return: - * none - * - * Enumerate the video device list of the video bus, + * none + * + * Enumerate the video device list of the video bus, * bind the ids with the corresponding video devices * under the video bus. */ @@ -1216,13 +1224,13 @@ static void acpi_video_device_rebind(struct acpi_video_bus *video) /* * Arg: - * video : video bus device - * device : video output device under the video - * bus + * video : video bus device + * device : video output device under the video + * bus * * Return: - * none - * + * none + * * Bind the ids with the corresponding video devices * under the video bus. */ @@ -1245,11 +1253,11 @@ acpi_video_device_bind(struct acpi_video_bus *video, /* * Arg: - * video : video bus device + * video : video bus device * * Return: - * < 0 : error - * + * < 0 : error + * * Call _DOD to enumerate all devices attached to display adapter * */ -- 1.8.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/