Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 1 Feb 2001 04:45:41 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 1 Feb 2001 04:45:31 -0500 Received: from wire.cadcamlab.org ([156.26.20.181]:61444 "EHLO wire.cadcamlab.org") by vger.kernel.org with ESMTP id ; Thu, 1 Feb 2001 04:45:12 -0500 Date: Thu, 1 Feb 2001 03:44:41 -0600 To: Rupa Schomaker Cc: Andre Hedrick , Andries.Brouwer@cwi.nl, mlord@pobox.com, ole@linpro.no, linux-kernel@vger.kernel.org Subject: Re: Problems with Promise IDE controller under 2.4.1 Message-ID: <20010201034441.A27725@cadcamlab.org> In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.12i In-Reply-To: ; from rupa-list+linux-kernel@rupa.com on Wed, Jan 31, 2001 at 11:33:24AM -0800 From: Peter Samuelson Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org [Rupa Schomaker] > In my case, I have two identical Maxtor drives, but they reported > different geometry. [...] > I'm doing RAID1 and it is really nice to have the same geometry so > that the partition info is the same between the two drives. Makes > life easier. If that's what you needed, you could have used 'dd' to copy the partition table from one drive to the other. Easier than going in and re-cabling just to fool your BIOS. Peter - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/