Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754938Ab3HETh7 (ORCPT ); Mon, 5 Aug 2013 15:37:59 -0400 Received: from mx1.redhat.com ([209.132.183.28]:62416 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754911Ab3HETh4 (ORCPT ); Mon, 5 Aug 2013 15:37:56 -0400 Subject: [PATCH v4 8/9] pci: Tune secondary bus reset timing To: bhelgaas@google.com, linux-pci@vger.kernel.org From: Alex Williamson Cc: ddutile@redhat.com, indou.takao@jp.fujitsu.com, linux-kernel@vger.kernel.org Date: Mon, 05 Aug 2013 13:37:53 -0600 Message-ID: <20130805193753.9260.35206.stgit@bling.home> In-Reply-To: <20130805193200.9260.38729.stgit@bling.home> References: <20130805193200.9260.38729.stgit@bling.home> User-Agent: StGit/0.16 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2466 Lines: 60 The PCI spec indicates that with stable power, reset needs to be asserted for a minimum of 1ms (Trst). Seems like we should be able to assume power is stable for a runtime secondary bus reset. The current code has always used 100ms with no explanation where that came from. The aer_do_secondary_bus_reset() function uses 2ms, but that seems to be a misinterpretation of the PCIe spec, where hot reset is implemented by TS1 ordered sets containing the hot reset command. After a 2ms delay the state machine enters the detect state, but to generate a link down, only two consecutive TS1 hot reset ordered sets are requred. 1ms should be plenty for that. After reset is de-asserted we must wait for devices to complete initialization. The specs refer to this as "recovery time" (Trhfa). For PCI this is 2^25 clock cycles or 2^26 for PCI-X. For minimum bus speeds, both of those come to 1s. PCIe "softens" this requirement with the Configuration Request Retry Status (CRS) completion status. Theoretically we could use CRS to shorten the wait time. We don't make use of that here, using a fixed 1s delay to allow devices to re-initialize. Signed-off-by: Alex Williamson --- drivers/pci/pci.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index b204206..ba64a7e 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3230,11 +3230,22 @@ void pci_reset_bridge_secondary_bus(struct pci_dev *dev) pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); ctrl |= PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); - msleep(100); + /* + * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms. + */ + msleep(1); ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); - msleep(100); + + /* + * Trhfa for conventional PCI is 2^25 clock cycles. + * Assuming a minimum 33MHz clock this results in a 1s + * delay before we can consider subordinate devices to + * be re-initialized. PCIe has some ways to shorten this, + * but we don't make use of them yet. + */ + ssleep(1); } EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/