Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932178Ab3HGPyy (ORCPT ); Wed, 7 Aug 2013 11:54:54 -0400 Received: from smtp161.dfw.emailsrvr.com ([67.192.241.161]:38715 "EHLO smtp161.dfw.emailsrvr.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756793Ab3HGPx4 (ORCPT ); Wed, 7 Aug 2013 11:53:56 -0400 From: Mark Langsdorf To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, tj@kernel.org, devicetree@vger.kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org, ian.campbell@citrix.com, rob.herring@calxeda.com, sergei.shtylyov@cogentembedded.com Cc: Mark Langsdorf Subject: [PATCH v3 4/5] sata, highbank: set tx_atten override bits Date: Wed, 7 Aug 2013 10:52:37 -0500 Message-Id: <1375890758-30265-4-git-send-email-mark.langsdorf@calxeda.com> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1375890758-30265-1-git-send-email-mark.langsdorf@calxeda.com> References: <1375890758-30265-1-git-send-email-mark.langsdorf@calxeda.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6531 Lines: 180 Some board designs do not drive the SATA transmit lines within the specification. The ECME can provide override settings, on a per board basis, to bring the transmit lines within spec. Read those settings from the DTB and program them in. Signed-off-by: Mark Langsdorf --- Changes from v2 None. Changes from v1 Clarified that the array is a u32 array. Added an example in the bindings. .../devicetree/bindings/ata/sata_highbank.txt | 5 +- drivers/ata/sata_highbank.c | 58 +++++++++++++++++----- 2 files changed, 49 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt index 1ac6d3d..fdbd4476 100644 --- a/Documentation/devicetree/bindings/ata/sata_highbank.txt +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt @@ -20,6 +20,9 @@ Optional properties: indicator lights using the indicated GPIOs - calxeda,led-order : a u32 array that map port numbers to offsets within the SGPIO bitstream. +- calxeda,tx-atten : a u32 array that contains TX attenuation override + codes, one per port. The upper 3 bytes are always + 0 and thus ignored. Example: sata@ffe08000 { @@ -28,5 +31,5 @@ Example: interrupts = <115>; calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 &combophy0 2 &combophy0 3>; - + calxeda,tx-atten = <0xff 22 0xff 0xff 23>; }; diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 8b40025..a7c8038 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -46,14 +46,19 @@ #define CR_BUSY 0x0001 #define CR_START 0x0001 #define CR_WR_RDN 0x0002 +#define CPHY_TX_INPUT_STS 0x2001 #define CPHY_RX_INPUT_STS 0x2002 -#define CPHY_SATA_OVERRIDE 0x4000 -#define CPHY_OVERRIDE 0x2005 +#define CPHY_SATA_TX_OVERRIDE 0x8000 +#define CPHY_SATA_RX_OVERRIDE 0x4000 +#define CPHY_TX_OVERRIDE 0x2004 +#define CPHY_RX_OVERRIDE 0x2005 #define SPHY_LANE 0x100 #define SPHY_HALF_RATE 0x0001 #define CPHY_SATA_DPLL_MODE 0x0700 #define CPHY_SATA_DPLL_SHIFT 8 #define CPHY_SATA_DPLL_RESET (1 << 11) +#define CPHY_SATA_TX_ATTEN 0x1c00 +#define CPHY_SATA_TX_ATTEN_SHIFT 10 #define CPHY_PHY_COUNT 6 #define CPHY_LANE_COUNT 4 #define CPHY_PORT_COUNT (CPHY_PHY_COUNT * CPHY_LANE_COUNT) @@ -66,6 +71,7 @@ struct phy_lane_info { void __iomem *phy_base; u8 lane_mapping; u8 phy_devs; + u8 tx_atten; }; static struct phy_lane_info port_data[CPHY_PORT_COUNT]; @@ -76,7 +82,6 @@ static DEFINE_SPINLOCK(sgpio_lock); #define SGPIO_PINS 3 #define SGPIO_PORTS 8 -/* can be cast as an ahci_host_priv for compatibility with most functions */ struct ecx_plat_data { u32 n_ports; unsigned sgpio_gpio[SGPIO_PINS]; @@ -259,8 +264,27 @@ static void highbank_cphy_disable_overrides(u8 sata_port) if (unlikely(port_data[sata_port].phy_base == NULL)) return; tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_OVERRIDE; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + tmp &= ~CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); +} + +static void cphy_override_tx_attenuation(u8 sata_port, u32 val) +{ + u8 lane = port_data[sata_port].lane_mapping; + u32 tmp; + + if (val & 0x8) + return; + + tmp = combo_phy_read(sata_port, CPHY_TX_INPUT_STS + lane * SPHY_LANE); + tmp &= ~CPHY_SATA_TX_OVERRIDE; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= CPHY_SATA_TX_OVERRIDE; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); + + tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; + combo_phy_write(sata_port, CPHY_TX_OVERRIDE + lane * SPHY_LANE, tmp); } static void cphy_override_rx_mode(u8 sata_port, u32 val) @@ -268,21 +292,21 @@ static void cphy_override_rx_mode(u8 sata_port, u32 val) u8 lane = port_data[sata_port].lane_mapping; u32 tmp; tmp = combo_phy_read(sata_port, CPHY_RX_INPUT_STS + lane * SPHY_LANE); - tmp &= ~CPHY_SATA_OVERRIDE; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + tmp &= ~CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); - tmp |= CPHY_SATA_OVERRIDE; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + tmp |= CPHY_SATA_RX_OVERRIDE; + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); tmp &= ~CPHY_SATA_DPLL_MODE; tmp |= val << CPHY_SATA_DPLL_SHIFT; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); tmp |= CPHY_SATA_DPLL_RESET; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); tmp &= ~CPHY_SATA_DPLL_RESET; - combo_phy_write(sata_port, CPHY_OVERRIDE + lane * SPHY_LANE, tmp); + combo_phy_write(sata_port, CPHY_RX_OVERRIDE + lane * SPHY_LANE, tmp); msleep(15); } @@ -299,16 +323,20 @@ static void highbank_cphy_override_lane(u8 sata_port) lane * SPHY_LANE); } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); cphy_override_rx_mode(sata_port, 3); + cphy_override_tx_attenuation(sata_port, port_data[sata_port].tx_atten); } static int highbank_initialize_phys(struct device *dev, void __iomem *addr) { struct device_node *sata_node = dev->of_node; - int phy_count = 0, phy, port = 0; + int phy_count = 0, phy, port = 0, i; void __iomem *cphy_base[CPHY_PHY_COUNT]; struct device_node *phy_nodes[CPHY_PHY_COUNT]; + u32 tx_atten[CPHY_PORT_COUNT]; + memset(port_data, 0, sizeof(struct phy_lane_info) * CPHY_PORT_COUNT); memset(phy_nodes, 0, sizeof(struct device_node*) * CPHY_PHY_COUNT); + memset(tx_atten, 0xff, CPHY_PORT_COUNT); do { u32 tmp; @@ -336,6 +364,10 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr) of_node_put(phy_data.np); port += 1; } while (port < CPHY_PORT_COUNT); + of_property_read_u32_array(sata_node, "calxeda,tx-atten", + tx_atten, port); + for (i = 0; i < port; i++) + port_data[i].tx_atten = (u8) tx_atten[i]; return 0; } -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/