Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754753Ab3HKR7x (ORCPT ); Sun, 11 Aug 2013 13:59:53 -0400 Received: from mail-bk0-f45.google.com ([209.85.214.45]:51554 "EHLO mail-bk0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754672Ab3HKR7t (ORCPT ); Sun, 11 Aug 2013 13:59:49 -0400 From: Tomasz Figa To: linux-samsung-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, Dan Williams , Jaroslav Kysela , Kukjin Kim , Liam Girdwood , Linus Walleij , Mark Brown , Mike Turquette , Padmavathi Venna , Russell King , Sangbeom Kim , Takashi Iwai , Vinod Koul , Tomasz Figa Subject: [PATCH 02/18] dmaengine: PL08x: Add support for different offset of CONFIG register Date: Sun, 11 Aug 2013 19:59:14 +0200 Message-Id: <1376243970-6489-3-git-send-email-tomasz.figa@gmail.com> X-Mailer: git-send-email 1.8.3.2 In-Reply-To: <1376243970-6489-1-git-send-email-tomasz.figa@gmail.com> References: <1376243970-6489-1-git-send-email-tomasz.figa@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4831 Lines: 149 Some variants of PL08x (namely PL080S, found in Samsung S3C64xx SoCs) have CONFIG register at different offset. This patch makes the driver use offset from vendor data struct. Signed-off-by: Tomasz Figa Reviewed-by: Linus Walleij Acked-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6a12392..2538e05 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -102,6 +102,7 @@ struct pl08x_driver_data; * missing */ struct vendor_data { + u8 config_offset; u8 channels; bool dualmaster; bool nomadik; @@ -145,6 +146,7 @@ struct pl08x_bus_data { struct pl08x_phy_chan { unsigned int id; void __iomem *base; + void __iomem *reg_config; spinlock_t lock; struct pl08x_dma_chan *serving; bool locked; @@ -334,7 +336,7 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) { unsigned int val; - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); return val & PL080_CONFIG_ACTIVE; } @@ -373,7 +375,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); writel(lli->lli, phychan->base + PL080_CH_LLI); writel(lli->cctl, phychan->base + PL080_CH_CONTROL); - writel(txd->ccfg, phychan->base + PL080_CH_CONFIG); + writel(txd->ccfg, phychan->reg_config); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -381,11 +383,11 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) cpu_relax(); /* Do not access config register until channel shows as inactive */ - val = readl(phychan->base + PL080_CH_CONFIG); + val = readl(phychan->reg_config); while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) - val = readl(phychan->base + PL080_CH_CONFIG); + val = readl(phychan->reg_config); - writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); + writel(val | PL080_CONFIG_ENABLE, phychan->reg_config); } /* @@ -404,9 +406,9 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) int timeout; /* Set the HALT bit and wait for the FIFO to drain */ - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); val |= PL080_CONFIG_HALT; - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); /* Wait for channel inactive */ for (timeout = 1000; timeout; timeout--) { @@ -423,9 +425,9 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) u32 val; /* Clear the HALT bit */ - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); val &= ~PL080_CONFIG_HALT; - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); } /* @@ -437,12 +439,12 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - u32 val = readl(ch->base + PL080_CH_CONFIG); + u32 val = readl(ch->reg_config); val &= ~(PL080_CONFIG_ENABLE | PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK); - writel(val, ch->base + PL080_CH_CONFIG); + writel(val, ch->reg_config); writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR); writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR); @@ -1952,6 +1954,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) ch->id = i; ch->base = pl08x->base + PL080_Cx_BASE(i); + ch->reg_config = ch->base + vd->config_offset; spin_lock_init(&ch->lock); /* @@ -1962,7 +1965,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) if (vd->nomadik) { u32 val; - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(ch->reg_config); if (val & (PL080N_CONFIG_ITPROT | PL080N_CONFIG_SECPROT)) { dev_info(&adev->dev, "physical channel %d reserved for secure access only\n", i); ch->locked = true; @@ -2043,17 +2046,20 @@ out_no_pl08x: /* PL080 has 8 channels and the PL080 have just 2 */ static struct vendor_data vendor_pl080 = { + .config_offset = PL080_CH_CONFIG, .channels = 8, .dualmaster = true, }; static struct vendor_data vendor_nomadik = { + .config_offset = PL080_CH_CONFIG, .channels = 8, .dualmaster = true, .nomadik = true, }; static struct vendor_data vendor_pl081 = { + .config_offset = PL080_CH_CONFIG, .channels = 2, .dualmaster = false, }; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/