Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1756203Ab3HMHd0 (ORCPT <rfc822;w@1wt.eu>);
	Tue, 13 Aug 2013 03:33:26 -0400
Received: from ns.mm-sol.com ([212.124.72.66]:48641 "EHLO extserv.mm-sol.com"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1752390Ab3HMHdX (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Tue, 13 Aug 2013 03:33:23 -0400
Message-ID: <1376379128.2208.9.camel@iivanov-dev.int.mm-sol.com>
Subject: Re: [RFC PATCH v2 1/3] usb: dwc3: msm: Add device tree binding
 information
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
To: balbi@ti.com
Cc: Kumar Gala <galak@codeaurora.org>, rob.herring@calxeda.com,
        pawel.moll@arm.com, mark.rutland@arm.com, swarren@wwwdotorg.org,
        ian.campbell@citrix.com, rob@landley.net, gregkh@linuxfoundation.org,
        grant.likely@linaro.org, idos@codeaurora.org, mgautam@codeaurora.org,
        devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
        linux-omap@vger.kernel.org, linux-arm-msm@vger.kernel.org
Date: Tue, 13 Aug 2013 10:32:08 +0300
In-Reply-To: <20130812180438.GC27954@radagast>
References: <1376042027-9798-1-git-send-email-iivanov@mm-sol.com>
	 <1376042027-9798-2-git-send-email-iivanov@mm-sol.com>
	 <169628C9-00BA-4E58-BF65-7B180E6BE4ED@codeaurora.org>
	 <20130812180438.GC27954@radagast>
Content-Type: text/plain; charset="UTF-8"
X-Mailer: Evolution 3.2.3-0ubuntu6 
Content-Transfer-Encoding: 7bit
Mime-Version: 1.0
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 3669
Lines: 97


Hi, 

On Mon, 2013-08-12 at 13:04 -0500, Felipe Balbi wrote: 
> On Fri, Aug 09, 2013 at 10:31:58AM -0500, Kumar Gala wrote:
> > 
> > On Aug 9, 2013, at 4:53 AM, Ivan T. Ivanov wrote:
> > 
> > > From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> > > 
> > > MSM USB3.0 core wrapper consist of USB3.0 IP (SNPS)
> > 
> > probably good to spell out Synopsys rather than SNPS
> 
> Synopsys (the company) has always used snps in their bindings though.
> 
> > > +Required properities :
> > > +- compatible : sould be "qcom,dwc3-hsphy";
> > > +- reg : offset and length of the register set in the memory map
> > > +- clocks : phandles to clock instances of the device tree nodes
> > > +- clock-names :
> > > +	"xo" : External reference clock 19 MHz
> > > +	"sleep_a_clk" : Sleep clock, used when USB3 core goes into low
> > > +	power mode (U3).
> > > +<supply-name>-supply : phandle to the regulator device tree node
> > > +Required "supply-name" are:
> > > +	"v1p8" : 1.8v supply for HSPHY
> > > +	"v3p3" : 3.3v supply for HSPHY
> > > +	"vbus" : vbus supply for host mode
> > > +	"vddcx" : vdd supply for HS-PHY digital circuit operation
> 
> I believe these regulators belong to the PHY, not DWC3. Please write a
> PHY driver.
> 

There is already usb phy drivers for these?? 

[PATCH v2 2/3] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core

> > > +Required properities :
> > > +- compatible : sould be "qcom,dwc3-ssphy";
> > > +- reg : offset and length of the register set in the memory map
> > > +- clocks : phandles to clock instances of the device tree nodes
> > > +- clock-names :
> > > +	"xo" : External reference clock 19 MHz
> > > +	"ref_clk" : Reference clock - used in host mode.
> > > +<supply-name>-supply : phandle to the regulator device tree node
> > > +Required "supply-name" are:
> > > +	"v1p8" : 1.8v supply for SS-PHY
> > > +	"vddcx" : vdd supply for SS-PHY digital circuit operation
> 
> likewise, these regulators should be moved to the PHY driver.
> 
> > > +Required properties :
> > > +- compatible : should be "qcom,dwc3"
> > > +- reg : offset and length of the register set in the memory map
> > > +	offset and length of the TCSR register for routing USB
> > > +	signals to either picoPHY0 or picoPHY1.
> > > +- clocks : phandles to clock instances of the device tree nodes
> > > +- clock-names :
> > > +	"core_clk" : Master/Core clock, have to be >= 125 MHz for SS
> > > +	operation and >= 60MHz for HS operation
> > > +	"iface_clk" : System bus AXI clock
> > > +	"sleep_clk" : Sleep clock, used when USB3 core goes into low
> > > +	power mode (U3).
> > > +	"utmi_clk" : Generated by HS-PHY. Used to clock the low power
> > > +	parts of thr HS Link layer.
> > > +
> > > +Optional properties :
> > > +- gdsc-supply : phandle to the globally distributed switch controller
> > > +  regulator node to the USB controller.
> > > +
> > > +Sub nodes:
> > > +- Sub node for "DWC3 USB3 controller".
> > > +  This sub node is required property for device node. The properties
> > > +  of this subnode are specified in dwc3.txt.
> > 
> > Is tx-fifo-resize required for qcom,dwc3? if so we should call that
> > out in the binding.
> 
> AFAICT that's only needed for OMAP5 ES1.0. Unless Qualcomm also screwed
> up default TX FIFO sizes :-p

Or it is intentional? :-) Look at [1] dwc3@f9200000

Ivan

[1] https://www.codeaurora.org/cgit/quic/la/kernel/msm/tree/arch/arm/boot/dts/apq8084.dtsi?h=msm-3.4

> 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/