Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 14 Oct 2002 19:54:11 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 14 Oct 2002 19:54:11 -0400 Received: from 137-123-ADSL.red.retevision.es ([80.224.123.137]:47555 "EHLO jerry.marcet.dyndns.org") by vger.kernel.org with ESMTP id ; Mon, 14 Oct 2002 19:54:02 -0400 Date: Tue, 15 Oct 2002 02:07:18 +0200 From: Javier Marcet To: linux-kernel@vger.kernel.org Cc: Gerd Knorr , vdr@linuxtv.org, linux-dvb@linuxtv.org Subject: Re: bttv and DVB cards hardware incompaibility only in late linux Message-ID: <20021015000718.GA13951@jerry.marcet.dyndns.org> References: <20021014235441.GA12048@jerry.marcet.dyndns.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="E39vaYmALEf/7YXx" Content-Disposition: inline In-Reply-To: <20021014235441.GA12048@jerry.marcet.dyndns.org> X-Editor: Vim http://www.vim.org/ User-Agent: Mutt/1.5.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 36864 Lines: 783 --E39vaYmALEf/7YXx Content-Type: multipart/mixed; boundary="OXfL5xGRrasGEqWY" Content-Disposition: inline --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii; format=flowed Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Sorry for the attachments on the previous e-mail, the go now :) --=20 Javier Marcet Saint Louis University, Madrid Campus --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Description: dmesg output without the dvb card plugged Content-Disposition: attachment; filename=dmesg-right Linux version 2.4.20-pre8-ac3-marcet (root@jerry.marcet.dyndns.org) (gcc version 3.2) #1 Tue Oct 15 00:12:27 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fec000 (usable) BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data) BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved) BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 383MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 98284 zone(0): 4096 pages. zone(1): 94188 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6a70 ACPI: RSDT (v001 ASUS A7V-133 12336.12337) @ 0x17fec000 ACPI: FADT (v001 ASUS A7V-133 12336.12337) @ 0x17fec080 ACPI: BOOT (v001 ASUS A7V-133 12336.12337) @ 0x17fec040 ACPI: DSDT (v001 ASUS A7V-133 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Kernel command line: root=/dev/sda2 video=matrox:mem:32,xres:1280,yres:960,left:264,right:24,hslen:160,upper:47,lower:1,vslen:3,pixclock:6024,sync:0x03,depth:32,pan panicblink=2 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1544.796 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3039.23 BogoMIPS Memory: 383020k/393136k available (1663k kernel code, 7552k reserved, 326k data, 276k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) ramfs: mounted with options: ramfs: max_pages=48149 max_file_pages=0 max_inodes=0 max_dentries=48149 Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(TM) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX HZ: Currently used HZ value is (1000) enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1544.0161 MHz. ..... host bus clock speed is 268.0549 MHz. cpu: 0, clocks: 268549, slice: 134274 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021002 PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Scanning bus 00 Found 00:00 [1106/0305] 000600 00 Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 Found 00:08 [1106/8305] 000604 01 Found 00:20 [1106/0686] 000601 00 Found 00:21 [1106/0571] 000101 00 Found 00:22 [1106/3038] 000c03 00 Found 00:23 [1106/3038] 000c03 00 Found 00:24 [1106/3057] 000680 00 Found 00:48 [1102/0002] 000401 00 Found 00:49 [1102/7002] 000980 00 Found 00:50 [109e/036e] 000400 00 Found 00:51 [109e/0878] 000480 00 Found 00:58 [9005/0010] 000100 00 Found 00:68 [10b7/9200] 000200 00 Found 00:88 [105a/0d30] 000180 00 Fixups for bus 00 Scanning behind PCI bridge 00:01.0, config 010100, pass 0 Scanning bus 01 Found 01:00 [102b/0525] 000300 00 Fixups for bus 01 Bus scan for 01 returning with max=01 Scanning behind PCI bridge 00:01.0, config 010100, pass 1 Bus scan for 00 returning with max=01 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing PnPBIOS: Found PnP BIOS installation structure at 0xc00fc4f0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc520, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PnPBIOS: PNP0c02: ioport range 0xe400-0xe47f has been reserved PnPBIOS: PNP0c02: ioport range 0xe800-0xe83f could not be reserved Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states) matroxfb: Matrox Millennium G400 MAX (AGP) detected matroxfb: MTRR's turned on matroxfb: 1280x960x32bpp (virtual: 1280x3276) matroxfb: framebuffer at 0xE2000000, mapped to 0xd880f000, size 33554432 Console: switching to colour frame buffer device 160x60 fb0: MATROX VGA frame buffer device Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio PDC20265: IDE controller at PCI slot 00:11.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:DMA, hdh:DMA hda: IBM-DTLA-307045, ATA DISK drive hda: DMA disabled blk: queue c0368940, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: host protected area => 1 hda: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 > SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs spurious 8259A interrupt: IRQ7. Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 Vendor: TEAC Model: CD-R56S Rev: 1.0P Type: CD-ROM ANSI SCSI revision: 02 Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 31, 16bit) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver reiserfs: checking transaction log (device 08:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 276k freed Adding Swap: 530104k swap-space (priority -1) reiserfs: checking transaction log (device 08:05) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:06) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:07) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:08) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:07) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:09) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:0a) ... Using r5 hash to sort names ReiserFS version 3.6.25 usb.c: registered new driver usbdevfs usb.c: registered new driver hub Real Time Clock Driver v1.10e 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0d.0: 3Com PCI 3c905C Tornado at 0x9400. Vers LK1.1.18-ac usb-uhci.c: $Revision: 1.275 $ time 00:19:22 Oct 15 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:04.2-1, assigned address 2 hub.c: USB hub found hub.c: 5 ports detected hub.c: new USB device 00:04.2-1.4, assigned address 3 usb.c: USB device 3 (vend/prod 0x9ef/0x101) is not claimed by any active driver. hub.c: new USB device 00:04.2-1.5, assigned address 4 usb.c: USB device 4 (vend/prod 0x43e/0x42bd) is not claimed by any active driver. --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Description: dmesg output _with_ the dvb card installed Content-Disposition: attachment; filename=dmesg-wrong Linux version 2.4.20-pre8-ac3-marcet (root@jerry.marcet.dyndns.org) (gcc version 3.2) #1 Tue Oct 15 00:12:27 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fec000 (usable) BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data) BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved) BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 383MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 98284 zone(0): 4096 pages. zone(1): 94188 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6a70 ACPI: RSDT (v001 ASUS A7V-133 12336.12337) @ 0x17fec000 ACPI: FADT (v001 ASUS A7V-133 12336.12337) @ 0x17fec080 ACPI: BOOT (v001 ASUS A7V-133 12336.12337) @ 0x17fec040 ACPI: DSDT (v001 ASUS A7V-133 00000.04096) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present Kernel command line: root=/dev/sda2 video=matrox:mem:32,xres:1280,yres:960,left:264,right:24,hslen:160,upper:47,lower:1,vslen:3,pixclock:6024,sync:0x03,depth:32,pan panicblink=2 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 1544.751 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3039.23 BogoMIPS Memory: 383020k/393136k available (1663k kernel code, 7552k reserved, 326k data, 276k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) ramfs: mounted with options: ramfs: max_pages=48149 max_file_pages=0 max_inodes=0 max_dentries=48149 Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(TM) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX HZ: Currently used HZ value is (1000) enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1544.0164 MHz. ..... host bus clock speed is 268.0550 MHz. cpu: 0, clocks: 268550, slice: 134275 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021002 PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Scanning bus 00 Found 00:00 [1106/0305] 000600 00 Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09 Found 00:08 [1106/8305] 000604 01 Found 00:20 [1106/0686] 000601 00 Found 00:21 [1106/0571] 000101 00 Found 00:22 [1106/3038] 000c03 00 Found 00:23 [1106/3038] 000c03 00 Found 00:24 [1106/3057] 000680 00 Found 00:50 [1131/7146] 000480 00 Found 00:58 [9005/0010] 000100 00 Found 00:60 [109e/036e] 000400 00 Found 00:61 [109e/0878] 000480 00 Found 00:68 [10b7/9200] 000200 00 Found 00:88 [105a/0d30] 000180 00 Fixups for bus 00 Scanning behind PCI bridge 00:01.0, config 010100, pass 0 Scanning bus 01 Found 01:00 [102b/0525] 000300 00 Fixups for bus 01 Bus scan for 01 returning with max=01 Scanning behind PCI bridge 00:01.0, config 010100, pass 1 Bus scan for 00 returning with max=01 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing PnPBIOS: Found PnP BIOS installation structure at 0xc00fc4f0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc520, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PnPBIOS: PNP0c02: ioport range 0xe400-0xe47f has been reserved PnPBIOS: PNP0c02: ioport range 0xe800-0xe83f could not be reserved Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states) matroxfb: Matrox Millennium G400 MAX (AGP) detected matroxfb: MTRR's turned on matroxfb: 1280x960x32bpp (virtual: 1280x3276) matroxfb: framebuffer at 0xE2000000, mapped to 0xd880f000, size 33554432 Console: switching to colour frame buffer device 160x60 fb0: MATROX VGA frame buffer device Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio PDC20265: IDE controller at PCI slot 00:11.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdg:DMA, hdh:pio hda: IBM-DTLA-307045, ATA DISK drive hda: DMA disabled blk: queue c0368940, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: host protected area => 1 hda: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 > SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs spurious 8259A interrupt: IRQ7. Vendor: IBM Model: DNES-309170W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 Vendor: TEAC Model: CD-R56S Rev: 1.0P Type: CD-ROM ANSI SCSI revision: 02 Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 31, 16bit) SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver reiserfs: checking transaction log (device 08:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 276k freed Adding Swap: 530104k swap-space (priority -1) reiserfs: checking transaction log (device 08:05) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:06) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:07) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:08) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:07) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:09) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:0a) ... Using r5 hash to sort names ReiserFS version 3.6.25 usb.c: registered new driver usbdevfs usb.c: registered new driver hub Real Time Clock Driver v1.10e 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0d.0: 3Com PCI 3c905C Tornado at 0xa000. Vers LK1.1.18-ac usb-uhci.c: $Revision: 1.275 $ time 00:19:22 Oct 15 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver hub.c: new USB device 00:04.2-1, assigned address 2 hub.c: USB hub found hub.c: 5 ports detected hub.c: new USB device 00:04.2-1.4, assigned address 3 usb.c: USB device 3 (vend/prod 0x9ef/0x101) is not claimed by any active driver. hub.c: new USB device 00:04.2-1.5, assigned address 4 usb.c: USB device 4 (vend/prod 0x43e/0x42bd) is not claimed by any active driver. --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Description: syslog of bttv's good behavior Content-Disposition: attachment; filename=log-right Oct 15 01:07:24 [kernel] Linux video capture interface: v1.00 Oct 15 01:07:24 [kernel] i2c-core.o: i2c core module version 2.6.5 (20020915) Oct 15 01:07:25 [kernel] bttv0: Hauppauge eeprom: model=44354, tuner=Temic 4009FR5 (20), radio=yes Oct 15 01:07:25 [kernel] msp34xx: init: chip=MSP3415D-B3, has NICAM support Oct 15 01:07:25 [kernel] msp3410: daemon started Oct 15 01:07:25 [kernel] bttv0: i2c attach [client=MSP3415D-B3,ok] Oct 15 01:07:25 [kernel] tvaudio: TV audio decoder + audio/video mux driver Oct 15 01:07:25 [kernel] tuner: probing bt848 #0 i2c adapter [id=0x10005] Oct 15 01:07:25 [kernel] tuner: chip found @ 0xc2 Oct 15 01:07:25 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 01:07:25 [kernel] msp3410: detection still in progress Oct 15 01:07:25 [kernel] msp3410: detection still in progress Oct 15 01:07:25 [kernel] msp3410: current mode: ERROR (0x0000) Oct 15 01:07:25 [kernel] msp34xx: setbass: 32768 0x00 Oct 15 01:07:39 [kernel] bttv0: open called Oct 15 01:07:39 [kernel] Display at e2000000 is 1280 by 3276, bytedepth 4, bpl 5120 Oct 15 01:07:40 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 01:07:40 [kernel] msp3410: detection still in progress Oct 15 01:07:40 [kernel] msp3410: current mode: 5.5/5.85 B/G NICAM FM (0x0008) Oct 15 01:07:41 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 01:07:41 [kernel] msp3410: detection still in progress Oct 15 01:07:41 [kernel] msp3410: detection still in progress Oct 15 01:07:41 [kernel] msp3410: current mode: 5.5/5.74 B/G Dual FM-Stereo (0x0003) Oct 15 01:07:42 [kernel] msp34xx: stereo detect register: 0 Oct 15 01:07:47 [kernel] bttv0: clip: ro=12828000 re=12820000 Oct 15 01:07:56 [kernel] bttv0: clip: ro=12828000 re=12820000 Oct 15 01:08:09 [kernel] bttv0: clip: ro=12828000 re=12820000 Oct 15 01:08:44 [kernel] bttv0: unloading Oct 15 01:08:44 [kernel] msp3410: thread: exit Oct 15 01:08:57 [fcron] SIGTERM signal received Oct 15 01:08:57 [fcron] Exiting with code 0 --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Description: syslog of bttv's errors when the dvb board is also installed Content-Disposition: attachment; filename=log-wrong Oct 15 00:51:22 [kernel] Linux video capture interface: v1.00 Oct 15 00:51:22 [kernel] i2c-core.o: i2c core module version 2.6.5 (20020915) Oct 15 00:51:22 [kernel] bttv0: Hauppauge eeprom: model=44354, tuner=Temic 4009FR5 (20), radio=yes Oct 15 00:51:22 [kernel] msp34xx: init: chip=MSP3415D-B3, has NICAM support Oct 15 00:51:22 [kernel] msp3410: daemon started Oct 15 00:51:22 [kernel] bttv0: i2c attach [client=MSP3415D-B3,ok] Oct 15 00:51:22 [kernel] tvaudio: TV audio decoder + audio/video mux driver Oct 15 00:51:22 [kernel] tuner: probing bt848 #0 i2c adapter [id=0x10005] Oct 15 00:51:22 [kernel] tuner: chip found @ 0xc2 Oct 15 00:51:22 [kernel] bttv0: registered device video0 Oct 15 00:51:33 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 15 00:51:33 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:33 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:38 [kernel] bttv0: resetting chip Oct 15 00:51:38 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:51:38 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:38 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:38 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 15 00:51:38 [kernel] bttv0: irq: SCERR risc_count=12670000 Oct 15 00:54:45 [kernel] Linux video capture interface: v1.00 Oct 15 00:54:45 [kernel] i2c-core.o: i2c core module version 2.6.5 (20020915) Oct 15 00:54:45 [kernel] msp34xx: init: chip=MSP3415D-B3, has NICAM support Oct 15 00:54:45 [kernel] msp3410: daemon started Oct 15 00:54:45 [kernel] bttv0: i2c attach [client=MSP3415D-B3,ok] Oct 15 00:54:45 [kernel] tvaudio: TV audio decoder + audio/video mux driver Oct 15 00:54:45 [kernel] tuner: probing bt848 #0 i2c adapter [id=0x10005] Oct 15 00:54:45 [kernel] tuner: chip found @ 0xc2 Oct 15 00:54:45 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 00:54:45 [kernel] msp3410: detection still in progress Oct 15 00:54:45 [kernel] msp3410: current mode: 5.5/5.85 B/G NICAM FM (0x0008) Oct 15 00:54:45 [kernel] msp3400: NICAM setstereo: stereo Oct 15 00:54:46 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] bttv0: open called Oct 15 00:54:54 [kernel] Display at e2000000 is 1280 by 3276, bytedepth 4, bpl 5120 Oct 15 00:54:54 [kernel] bttv0: open called Oct 15 00:54:54 [kernel] bttv0: open called Oct 15 00:54:54 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:54:55 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 00:54:55 [kernel] msp3410: detection still in progress Oct 15 00:54:55 [kernel] msp3410: current mode: 5.5/5.85 B/G NICAM FM (0x0008) Oct 15 00:54:56 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:59 [kernel] bttv0: resetting chip Oct 15 00:55:00 [kernel] ok Oct 15 00:55:00 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:55:00 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:55:00 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:55:01 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 15 00:55:01 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 00:55:01 [kernel] msp3410: detection still in progress Oct 15 00:55:01 [kernel] msp3410: detection still in progress Oct 15 00:55:01 [kernel] msp3410: current mode: 5.5/5.74 B/G Dual FM-Stereo (0x0003) Oct 15 00:55:02 [kernel] msp34xx: stereo detect register: 0 Oct 15 00:55:05 [kernel] bttv0: unloading Oct 15 00:55:05 [kernel] msp3410: thread: exit --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Description: lspci-> bttv +/- correctly identified by the kernel Content-Disposition: attachment; filename=lspci-right 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) Subsystem: Asustek Computer, Inc. A7V133/A7V133-C Mainboard Flags: bus master, medium devsel, latency 8 Memory at e4000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 2.0 Capabilities: [c0] Power Management version 2 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: df000000-e06fffff Prefetchable memory behind bridge: e1f00000-e3ffffff Capabilities: [80] Power Management version 2 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: Asustek Computer, Inc. A7V133/A7V133-C Mainboard Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Flags: bus master, medium devsel, latency 32 I/O ports at d800 [size=16] Capabilities: [c0] Power Management version 2 00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at d000 [size=32] Capabilities: [80] Power Management version 2 00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: Asustek Computer, Inc. A7V133/A7V133-C Mainboard Flags: medium devsel, IRQ 9 Capabilities: [68] Power Management version 2 00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04) Subsystem: Creative Labs CT4620 SBLive! Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at a400 [size=32] Capabilities: [dc] Power Management version 1 00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 01) Subsystem: Creative Labs Gameport Joystick Flags: bus master, medium devsel, latency 32 I/O ports at a000 [size=8] Capabilities: [dc] Power Management version 1 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV/GO Flags: bus master, medium devsel, latency 32, IRQ 15 Memory at e1000000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV/GO Flags: bus master, medium devsel, latency 32, IRQ 15 Memory at e0800000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 00:0b.0 SCSI storage controller: Adaptec AHA-2940U2/U2W Subsystem: Adaptec AHA-2940U2W SCSI Controller Flags: bus master, medium devsel, latency 32, IRQ 10 BIST result: 00 I/O ports at 9800 [disabled] [size=256] Memory at de800000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at [disabled] [size=128K] Capabilities: [dc] Power Management version 1 00:0d.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Flags: bus master, medium devsel, latency 32, IRQ 9 I/O ports at 9400 [size=128] Memory at de000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at [disabled] [size=128K] Capabilities: [dc] Power Management version 2 00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02) Subsystem: Promise Technology, Inc. Ultra100 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at 9000 [size=8] I/O ports at 8800 [size=4] I/O ports at 8400 [size=8] I/O ports at 8000 [size=4] I/O ports at 7800 [size=64] Memory at dd800000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at [disabled] [size=64K] Capabilities: [58] Power Management version 1 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 03) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at e2000000 (32-bit, prefetchable) [size=32M] Memory at df800000 (32-bit, non-prefetchable) [size=16K] Memory at df000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at e1ff0000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0 --OXfL5xGRrasGEqWY Content-Type: text/plain; charset=us-ascii Content-Description: lspci-> bttv as unknown card when dvb board is in Content-Disposition: attachment; filename=log-wrong Oct 15 00:51:22 [kernel] Linux video capture interface: v1.00 Oct 15 00:51:22 [kernel] i2c-core.o: i2c core module version 2.6.5 (20020915) Oct 15 00:51:22 [kernel] bttv0: Hauppauge eeprom: model=44354, tuner=Temic 4009FR5 (20), radio=yes Oct 15 00:51:22 [kernel] msp34xx: init: chip=MSP3415D-B3, has NICAM support Oct 15 00:51:22 [kernel] msp3410: daemon started Oct 15 00:51:22 [kernel] bttv0: i2c attach [client=MSP3415D-B3,ok] Oct 15 00:51:22 [kernel] tvaudio: TV audio decoder + audio/video mux driver Oct 15 00:51:22 [kernel] tuner: probing bt848 #0 i2c adapter [id=0x10005] Oct 15 00:51:22 [kernel] tuner: chip found @ 0xc2 Oct 15 00:51:22 [kernel] bttv0: registered device video0 Oct 15 00:51:33 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 15 00:51:33 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:33 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:38 [kernel] bttv0: resetting chip Oct 15 00:51:38 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:51:38 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:38 [kernel] bttv0: irq: SCERR risc_count=12670014 Oct 15 00:51:38 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 15 00:51:38 [kernel] bttv0: irq: SCERR risc_count=12670000 Oct 15 00:54:45 [kernel] Linux video capture interface: v1.00 Oct 15 00:54:45 [kernel] i2c-core.o: i2c core module version 2.6.5 (20020915) Oct 15 00:54:45 [kernel] msp34xx: init: chip=MSP3415D-B3, has NICAM support Oct 15 00:54:45 [kernel] msp3410: daemon started Oct 15 00:54:45 [kernel] bttv0: i2c attach [client=MSP3415D-B3,ok] Oct 15 00:54:45 [kernel] tvaudio: TV audio decoder + audio/video mux driver Oct 15 00:54:45 [kernel] tuner: probing bt848 #0 i2c adapter [id=0x10005] Oct 15 00:54:45 [kernel] tuner: chip found @ 0xc2 Oct 15 00:54:45 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 00:54:45 [kernel] msp3410: detection still in progress Oct 15 00:54:45 [kernel] msp3410: current mode: 5.5/5.85 B/G NICAM FM (0x0008) Oct 15 00:54:45 [kernel] msp3400: NICAM setstereo: stereo Oct 15 00:54:46 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] bttv0: open called Oct 15 00:54:54 [kernel] Display at e2000000 is 1280 by 3276, bytedepth 4, bpl 5120 Oct 15 00:54:54 [kernel] bttv0: open called Oct 15 00:54:54 [kernel] bttv0: open called Oct 15 00:54:54 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:54 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:54:55 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 00:54:55 [kernel] msp3410: detection still in progress Oct 15 00:54:55 [kernel] msp3410: current mode: 5.5/5.85 B/G NICAM FM (0x0008) Oct 15 00:54:56 [kernel] msp34xx: nicam sync=1, mode=8 Oct 15 00:54:59 [kernel] bttv0: resetting chip Oct 15 00:55:00 [kernel] ok Oct 15 00:55:00 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:55:00 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:55:00 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x8 Oct 15 00:55:01 [kernel] scsi0: PCI error Interrupt at seqaddr = 0x9 Oct 15 00:55:01 [kernel] msp3410: setting mode: autodetect start (0x0001) Oct 15 00:55:01 [kernel] msp3410: detection still in progress Oct 15 00:55:01 [kernel] msp3410: detection still in progress Oct 15 00:55:01 [kernel] msp3410: current mode: 5.5/5.74 B/G Dual FM-Stereo (0x0003) Oct 15 00:55:02 [kernel] msp34xx: stereo detect register: 0 Oct 15 00:55:05 [kernel] bttv0: unloading Oct 15 00:55:05 [kernel] msp3410: thread: exit --OXfL5xGRrasGEqWY-- --E39vaYmALEf/7YXx Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iEYEARECAAYFAj2rXDYACgkQx/ptJkB7fryKUQCZAWrYVFpZkLQRP08hsGYoxYRh 8uwAnjE0fRKJ2wrb7eX5uUvBpzp4lX/2 =3kN3 -----END PGP SIGNATURE----- --E39vaYmALEf/7YXx-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/