Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1760405Ab3HNUkP (ORCPT <rfc822;w@1wt.eu>);
	Wed, 14 Aug 2013 16:40:15 -0400
Received: from smtp113.ord1c.emailsrvr.com ([108.166.43.113]:55832 "EHLO
	smtp113.ord1c.emailsrvr.com" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S1760298Ab3HNUkN (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Wed, 14 Aug 2013 16:40:13 -0400
From: Mark Langsdorf <mark.langsdorf@calxeda.com>
To: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, tj@kernel.org,
        devicetree@vger.kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
        swarren@wwwdotorg.org, ian.campbell@citrix.com,
        rob.herring@calxeda.com, sergei.shtylyov@cogentembedded.com
Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>
Subject: [PATCH v4 1/3] devicetree: create a separate binding description for sata_highbank
Date: Wed, 14 Aug 2013 15:40:11 -0500
Message-Id: <1376512811-25428-1-git-send-email-mark.langsdorf@calxeda.com>
X-Mailer: git-send-email 1.8.1.2
In-Reply-To: <1374851518-4802-1-git-send-email-mark.langsdorf@calxeda.com>
References: <1374851518-4802-1-git-send-email-mark.langsdorf@calxeda.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 4166
Lines: 106

The Calxeda sata_highbank driver has been adding its descriptions to the
ahci driver. Separate them properly. This patch only affects
documentation and has no functional component.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
---
Changes from v3
	Added all optional properties to the example.
	Expanded the description.
	Renumbered the patch series since the first two got accepted.
Changes from v2
	Fixed some indenting.
Changes from v1
	None.

---
 .../devicetree/bindings/ata/ahci-platform.txt      | 18 +++---------
 .../devicetree/bindings/ata/sata_highbank.txt      | 34 ++++++++++++++++++++++
 2 files changed, 38 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 3ec0c5c..89de156 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
+- compatible        : compatible list, contains "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
-- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
 - dma-coherent      : Present if dma operations are coherent
 
 Example:
         sata@ffe08000 {
-		compatible = "calxeda,hb-ahci";
-                reg = <0xffe08000 0x1000>;
-                interrupts = <115>;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
+		compatible = "snps,spear-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
 
         };
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
new file mode 100644
index 0000000..e7a6f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt
@@ -0,0 +1,34 @@
+* Calxeda AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+The Calxeda SATA controller mostly conforms to the AHCI interface
+with some special extensions to add functionality.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "calxeda,hb-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Optional properties:
+- dma-coherent      : Present if dma operations are coherent
+- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
+			SATA port to a combophy and a lane within that
+			combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+			which indicates that the driver supports SGPIO
+			indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+			SGPIO bitstream.
+
+Example:
+        sata@ffe08000 {
+		compatible = "calxeda,hb-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
+		dma-coherent;
+		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+					&combophy0 2 &combophy0 3>;
+		calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+		calxeda,led-order = <4 0 1 2 3>;
+        };
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/