Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759474Ab3HOTfH (ORCPT ); Thu, 15 Aug 2013 15:35:07 -0400 Received: from mail-ea0-f179.google.com ([209.85.215.179]:50483 "EHLO mail-ea0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757521Ab3HOTfF (ORCPT ); Thu, 15 Aug 2013 15:35:05 -0400 From: Jens Frederich To: gregkh@linuxfoundation.org Cc: dsd@laptop.org, jon.nettleton@gmail.com, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, Jens Frederich Subject: [PATCH 2/3] Staging: olpc_dcon: replace some magic numbers Date: Thu, 15 Aug 2013 21:34:55 +0200 Message-Id: <1376595295-7820-1-git-send-email-jfrederich@gmail.com> X-Mailer: git-send-email 1.7.9.5 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4197 Lines: 120 This patch replace some magic numbers. I believe it makes the driver more readable. The magic number 0x26 is the XO system embedded controller (EC) command 'DCON power enable/disable'. Number 0x41, and 0x42 are special memory controller settings register. The 0x41 initialize bit sequence 0x101 means: enable memory power down function and special SDRAM clock delay for synchronize SDRAM output and clock signal. The 0x42 initialize squence 0x101 is wrong. According to the specification Bit 8 is reserved, thus not in use. I removed it. Signed-off-by: Jens Frederich diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 7c460f2..5ca4fa4 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -90,9 +90,10 @@ static int dcon_hw_init(struct dcon_priv *dcon, int is_init) /* SDRAM setup/hold time */ dcon_write(dcon, 0x3a, 0xc040); - dcon_write(dcon, 0x41, 0x0000); - dcon_write(dcon, 0x41, 0x0101); - dcon_write(dcon, 0x42, 0x0101); + dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000); /* clear option bits */ + dcon_write(dcon, DCON_REG_MEM_OPT_A, + MEM_DLL_CLOCK_DELAY | MEM_POWER_DOWN); + dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET); /* Colour swizzle, AA, no passthrough, backlight */ if (is_init) { @@ -126,7 +127,7 @@ static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down) power_up: if (is_powered_down) { x = 1; - x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); if (x) { pr_warn("unable to force dcon to power up: %d!\n", x); return x; @@ -144,7 +145,7 @@ power_up: pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n"); BUG_ON(olpc_board_at_least(olpc_board(0xc2))); x = 0; - olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); msleep(100); is_powered_down = 1; goto power_up; /* argh, stupid hardware.. */ @@ -208,7 +209,7 @@ static void dcon_sleep(struct dcon_priv *dcon, bool sleep) if (sleep) { x = 0; - x = olpc_ec_cmd(0x26, (unsigned char *)&x, 1, NULL, 0); + x = olpc_ec_cmd(EC_DCON_POWER_MODE, (u8 *)&x, 1, NULL, 0); if (x) pr_warn("unable to force dcon to power down: %d!\n", x); else diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h index 997bded..524ee49 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.h +++ b/drivers/staging/olpc_dcon/olpc_dcon.h @@ -22,15 +22,24 @@ #define MODE_DEBUG (1<<14) #define MODE_SELFTEST (1<<15) -#define DCON_REG_HRES 2 -#define DCON_REG_HTOTAL 3 -#define DCON_REG_HSYNC_WIDTH 4 -#define DCON_REG_VRES 5 -#define DCON_REG_VTOTAL 6 -#define DCON_REG_VSYNC_WIDTH 7 -#define DCON_REG_TIMEOUT 8 -#define DCON_REG_SCAN_INT 9 -#define DCON_REG_BRIGHT 10 +#define DCON_REG_HRES 0x2 +#define DCON_REG_HTOTAL 0x3 +#define DCON_REG_HSYNC_WIDTH 0x4 +#define DCON_REG_VRES 0x5 +#define DCON_REG_VTOTAL 0x6 +#define DCON_REG_VSYNC_WIDTH 0x7 +#define DCON_REG_TIMEOUT 0x8 +#define DCON_REG_SCAN_INT 0x9 +#define DCON_REG_BRIGHT 0x10 +#define DCON_REG_MEM_OPT_A 0x41 +#define DCON_REG_MEM_OPT_B 0x42 + +/* Load Delay Locked Loop (DLL) settings for clock delay */ +#define MEM_DLL_CLOCK_DELAY (1<<0) +/* Memory controller power down function */ +#define MEM_POWER_DOWN (1<<8) +/* Memory controller software reset */ +#define MEM_SOFT_RESET (1<<0) /* Status values */ diff --git a/include/linux/olpc-ec.h b/include/linux/olpc-ec.h index 5bb6e76..2925df3 100644 --- a/include/linux/olpc-ec.h +++ b/include/linux/olpc-ec.h @@ -6,6 +6,7 @@ #define EC_WRITE_SCI_MASK 0x1b #define EC_WAKE_UP_WLAN 0x24 #define EC_WLAN_LEAVE_RESET 0x25 +#define EC_DCON_POWER_MODE 0x26 #define EC_READ_EB_MODE 0x2a #define EC_SET_SCI_INHIBIT 0x32 #define EC_SET_SCI_INHIBIT_RELEASE 0x34 -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/