Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751663Ab3HUH6e (ORCPT ); Wed, 21 Aug 2013 03:58:34 -0400 Received: from mho-03-ewr.mailhop.org ([204.13.248.66]:17253 "EHLO mho-01-ewr.mailhop.org" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751090Ab3HUH6c (ORCPT ); Wed, 21 Aug 2013 03:58:32 -0400 X-Mail-Handler: Dyn Standard SMTP by Dyn X-Originating-IP: 50.131.214.131 X-Report-Abuse-To: abuse@dyndns.com (see http://www.dyndns.com/services/sendlabs/outbound_abuse.html for abuse reporting information) X-MHO-User: U2FsdGVkX1/ZIhDySOdB5svz0SGPQ3b/ Date: Wed, 21 Aug 2013 00:58:28 -0700 From: Tony Lindgren To: Zubair Lutfullah Cc: sameo@linux.intel.com, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org Subject: Re: [PATCH] typo fixes (coordiante -> coordinate) in am335x Message-ID: <20130821075828.GZ7656@atomide.com> References: <1373901928-19605-1-git-send-email-zubair.lutfullah@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1373901928-19605-1-git-send-email-zubair.lutfullah@gmail.com> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3851 Lines: 92 * Zubair Lutfullah [130715 08:33]: > Did a grep for coordiante and replaced them all > with coordinate. > > This applies to the mfd-next tree. This should be safe to apply via the MFD tree as a non-critical fix assuming the bootloaders are not yet using this: Acked-by: Tony Lindgren > Signed-off-by: Zubair Lutfullah > --- > .../bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++-- > arch/arm/boot/dts/am335x-evm.dts | 2 +- > drivers/input/touchscreen/ti_am335x_tsc.c | 2 +- > drivers/mfd/ti_am335x_tscadc.c | 2 +- > 4 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > index 491c97b..3e22aec 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt > @@ -6,7 +6,7 @@ Required properties: > ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen > support on the platform. > ti,x-plate-resistance: X plate resistance > - ti,coordiante-readouts: The sequencer supports a total of 16 > + ti,coordinate-readouts: The sequencer supports a total of 16 > programmable steps each step is used to > read a single coordinate. A single > readout is enough but multiple reads can > @@ -34,7 +34,7 @@ Example: > tsc { > ti,wires = <4>; > ti,x-plate-resistance = <200>; > - ti,coordiante-readouts = <5>; > + ti,coordinate-readouts = <5>; > ti,wire-config = <0x00 0x11 0x22 0x33>; > }; > > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts > index 0fa4c7f..e50b781 100644 > --- a/arch/arm/boot/dts/am335x-evm.dts > +++ b/arch/arm/boot/dts/am335x-evm.dts > @@ -250,7 +250,7 @@ > tsc { > ti,wires = <4>; > ti,x-plate-resistance = <200>; > - ti,coordiante-readouts = <5>; > + ti,coordinate-readouts = <5>; > ti,wire-config = <0x00 0x11 0x22 0x33>; > }; > > diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c > index 0e9f02a..6422f65 100644 > --- a/drivers/input/touchscreen/ti_am335x_tsc.c > +++ b/drivers/input/touchscreen/ti_am335x_tsc.c > @@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev, > if (err < 0) > return err; > > - err = of_property_read_u32(node, "ti,coordiante-readouts", > + err = of_property_read_u32(node, "ti,coordinate-readouts", > &ts_dev->coordinate_readouts); > if (err < 0) > return err; > diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c > index b003a16..dd31e23 100644 > --- a/drivers/mfd/ti_am335x_tscadc.c > +++ b/drivers/mfd/ti_am335x_tscadc.c > @@ -106,7 +106,7 @@ static int ti_tscadc_probe(struct platform_device *pdev) > > node = of_get_child_by_name(pdev->dev.of_node, "tsc"); > of_property_read_u32(node, "ti,wires", &tsc_wires); > - of_property_read_u32(node, "ti,coordiante-readouts", &readouts); > + of_property_read_u32(node, "ti,coordinate-readouts", &readouts); > > node = of_get_child_by_name(pdev->dev.of_node, "adc"); > of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) { > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/