Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754461Ab3H1GyR (ORCPT ); Wed, 28 Aug 2013 02:54:17 -0400 Received: from ch1ehsobe005.messaging.microsoft.com ([216.32.181.185]:51069 "EHLO ch1outboundpool.messaging.microsoft.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752397Ab3H1GyQ (ORCPT ); Wed, 28 Aug 2013 02:54:16 -0400 X-Forefront-Antispam-Report: CIP:70.37.183.190;KIP:(null);UIP:(null);IPV:NLI;H:mail.freescale.net;RD:none;EFVD:NLI X-SpamScore: -5 X-BigFish: VS-5(zzbb2dI98dI9371I1432I4015Izz1f42h208ch1ee6h1de0h1fdah2073h1202h1e76h1d1ah1d2ah1fc6hzz1de098h8275bh1de097hz2dh2a8h839h947hd25he5bhf0ah1288h12a5h12a9h12bdh137ah13b6h1441h1504h1537h153bh162dh1631h1758h1765h18e1h190ch1946h19b4h19c3h1ad9h1b0ah1b2fh1fb3h1d0ch1d2eh1d3fh1dfeh1dffh1f5fh1fe8h1ff5h1155h) Message-ID: <521D9E89.7040700@freescale.com> Date: Wed, 28 Aug 2013 14:54:01 +0800 From: Hongbo Zhang User-Agent: Mozilla/5.0 (X11; Linux i686; rv:17.0) Gecko/20130510 Thunderbird/17.0.6 MIME-Version: 1.0 To: Mark Rutland CC: "rob.herring@calxeda.com" , Pawel Moll , "swarren@wwwdotorg.org" , "ian.campbell@citrix.com" , "vinod.koul@intel.com" , "djbw@fb.com" , "devicetree@vger.kernel.org" , "linuxppc-dev@lists.ozlabs.org" , "linux-kernel@vger.kernel.org" Subject: Re: [PATCH v8 2/3] DMA: Freescale: Add new 8-channel DMA engine device tree nodes References: <1377600123-5746-1-git-send-email-hongbo.zhang@freescale.com> <1377600123-5746-3-git-send-email-hongbo.zhang@freescale.com> <20130827113534.GI19893@e106331-lin.cambridge.arm.com> In-Reply-To: <20130827113534.GI19893@e106331-lin.cambridge.arm.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit X-OriginatorOrg: freescale.com X-FOPE-CONNECTOR: Id%0$Dn%*$RO%0$TLS%0$FQDN%$TlsDn% Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6181 Lines: 157 On 08/27/2013 07:35 PM, Mark Rutland wrote: > On Tue, Aug 27, 2013 at 11:42:02AM +0100, hongbo.zhang@freescale.com wrote: >> From: Hongbo Zhang >> >> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds >> the device tree nodes for them. >> >> Signed-off-by: Hongbo Zhang >> --- >> .../devicetree/bindings/powerpc/fsl/dma.txt | 66 ++++++++++++++++ >> arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 4 +- >> arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 81 ++++++++++++++++++++ >> arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 81 ++++++++++++++++++++ >> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +- >> 5 files changed, 232 insertions(+), 4 deletions(-) >> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi >> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi >> >> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt >> index ddf17af..10fd031 100644 >> --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt >> +++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt >> @@ -126,6 +126,72 @@ Example: >> }; >> }; >> >> +** Freescale Elo3 DMA Controller >> + This is EloPlus controller with 8 channels, used in Freescale Txxx and Bxxx >> + series chips, such as t1040, t4240, b4860. >> + >> +Required properties: >> + >> +- compatible : must include "fsl,elo3-dma" >> +- reg : >> +- ranges : describes the mapping between the address space of the >> + DMA channels and the address space of the DMA controller >> + >> +- DMA channel nodes: >> + - compatible : must include "fsl,eloplus-dma-channel" >> + - reg : >> + - interrupts : >> + - interrupt-parent : optional, if needed for interrupt mapping >> + >> +Example: >> +dma@100300 { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + compatible = "fsl,elo3-dma"; >> + reg = <0x100300 0x4 0x100600 0x4>; > Is that one reg entry where #size-cells=2 and #address-cells=2? > > That's what the binding implies (given it only describes a single reg > entry). > > if it's two entries, we should make that explicit (both in the binding > and example): > > reg = <0x100300 0x4>, > <0x100600 0x4>; Yes they are two entries, I will change it this way. >> + ranges = <0x0 0x100100 0x500>; > If it is one reg entry then the example ranges property isn't big enough > to contain the parent-bus-address. They are two reg entries, so the range is big enough. > >> + dma-channel@0 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x0 0x80>; >> + interrupts = <28 2 0 0>; >> + }; >> + dma-channel@80 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x80 0x80>; >> + interrupts = <29 2 0 0>; >> + }; >> + dma-channel@100 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x100 0x80>; >> + interrupts = <30 2 0 0>; >> + }; >> + dma-channel@180 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x180 0x80>; >> + interrupts = <31 2 0 0>; >> + }; >> + dma-channel@300 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x300 0x80>; >> + interrupts = <76 2 0 0>; >> + }; >> + dma-channel@380 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x380 0x80>; >> + interrupts = <77 2 0 0>; >> + }; >> + dma-channel@400 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x400 0x80>; >> + interrupts = <78 2 0 0>; >> + }; >> + dma-channel@480 { >> + compatible = "fsl,eloplus-dma-channel"; >> + reg = <0x480 0x80>; >> + interrupts = <79 2 0 0>; >> + }; >> +}; >> + >> Note on DMA channel compatible properties: The compatible property must say >> "fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA >> driver (fsldma). Any DMA channel used by fsldma cannot be used by another >> diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi >> index 7399154..ea53ea1 100644 >> --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi >> +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi >> @@ -223,13 +223,13 @@ >> reg = <0xe2000 0x1000>; >> }; >> >> -/include/ "qoriq-dma-0.dtsi" >> +/include/ "elo3-dma-0.dtsi" >> dma@100300 { >> fsl,iommu-parent = <&pamu0>; >> fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ >> }; >> >> -/include/ "qoriq-dma-1.dtsi" >> +/include/ "elo3-dma-1.dtsi" >> dma@101300 { >> fsl,iommu-parent = <&pamu0>; >> fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ >> diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi >> new file mode 100644 >> index 0000000..69a3277 >> --- /dev/null >> +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi >> @@ -0,0 +1,81 @@ >> +/* >> + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ] > Copy-pasted? > > Presumably should be "Elo3 DMA devicetree stub", or similar? > > Similarly for elo3-dma-1.dtsi. Yes copy-pasted, but QorIQ isn't wrong, it is name of Freescale series chips. To be more specific, I'd like to use "QorIQ Elo3 DMA devicetree stub" > Thanks, > Mark. > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/