Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754267Ab3H1RyZ (ORCPT ); Wed, 28 Aug 2013 13:54:25 -0400 Received: from mail-la0-f52.google.com ([209.85.215.52]:51758 "EHLO mail-la0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754172Ab3H1RyW (ORCPT ); Wed, 28 Aug 2013 13:54:22 -0400 Message-ID: <521E394C.3040402@cogentembedded.com> Date: Wed, 28 Aug 2013 21:54:20 +0400 From: Sergei Shtylyov Organization: Cogent Embedded User-Agent: Mozilla/5.0 (X11; Linux i686; rv:17.0) Gecko/20130801 Thunderbird/17.0.8 MIME-Version: 1.0 To: George Cherian CC: balbi@ti.com, myungjoo.ham@samsung.com, cw00.choi@samsung.com, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, grant.likely@linaro.org, rob@landley.net, ian.campbell@citrix.com, swarren@wwwdotorg.org, mark.rutland@arm.com, pawel.moll@arm.com, rob.herring@calxeda.com, linux-omap@vger.kernel.org, linux-usb@vger.kernel.org, bcousson@baylibre.com, davidb@codeaurora.org, arnd@arndb.de, swarren@nvidia.com, popcornmix@gmail.com Subject: Re: [PATCH v3 3/3] ARM: dts: dra7-evm: Add extcon nodes for USB ID pin detection References: <1377711185-31238-1-git-send-email-george.cherian@ti.com> <1377711185-31238-4-git-send-email-george.cherian@ti.com> In-Reply-To: <1377711185-31238-4-git-send-email-george.cherian@ti.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1565 Lines: 62 On 08/28/2013 09:33 PM, George Cherian wrote: > Add > -extcon nodes for USB ID pin detection. > -i2c nodes. > -pcf nodes to which USB ID pin is connected. > Signed-off-by: George Cherian > --- > arch/arm/boot/dts/dra7-evm.dts | 50 +++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 49 insertions(+), 1 deletion(-) > diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts > index acd3c09..8b0738a 100644 > --- a/arch/arm/boot/dts/dra7-evm.dts > +++ b/arch/arm/boot/dts/dra7-evm.dts [...] > @@ -33,10 +44,47 @@ > }; > }; > > +&i2c1 { > + clock-frequency = <400000>; > + > + gpio20: pcf8575@20 { ePAPR was talking about the node naming, not about labelling. Back to the drawing board. ;-) > + compatible = "ti,pcf8575"; > + reg = <0x20>; > + n_latch = <0x4000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-parent = <&gpio6>; > + interrupts = <11 2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpio21: pcf8575@21 { > + compatible = "ti,pcf8575"; > + reg = <0x21>; > + n_latch = <0x1408>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-parent = <&pcf_20>; > + interrupts = <14 2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > +}; > + WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/