Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755540Ab3H1WRy (ORCPT ); Wed, 28 Aug 2013 18:17:54 -0400 Received: from kiruna.synopsys.com ([198.182.44.80]:44158 "EHLO kiruna.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755449Ab3H1WRw convert rfc822-to-8bit (ORCPT ); Wed, 28 Aug 2013 18:17:52 -0400 From: Paul Zimmerman To: Sarah Sharp CC: Julius Werner , LKML , "linux-usb@vger.kernel.org" , Greg Kroah-Hartman , Vincent Palatin , Benson Leung , Felipe Balbi , "mathias.nyman@linux.intel.com" Subject: RE: [PATCH] usb: xhci-plat: Enable USB 2.0 hardware LPM support for platform xHCs Thread-Topic: [PATCH] usb: xhci-plat: Enable USB 2.0 hardware LPM support for platform xHCs Thread-Index: AQHOnfwYI9Np33Plqkq7vUNbfD4u75mgdUEAgAAzMICAADKpAIAAPKeA//+VVhCAB60tgP//i2hQgAPFRAD//4sloA== Date: Wed, 28 Aug 2013 22:15:34 +0000 Message-ID: References: <1377040909-18428-1-git-send-email-jwerner@chromium.org> <20130821184042.GC3577@xanatos> <20130822004514.GB19747@xanatos> <20130826191411.GG5112@xanatos> <20130828215142.GJ26483@xanatos> In-Reply-To: <20130828215142.GJ26483@xanatos> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [10.9.64.240] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4069 Lines: 90 > From: Sarah Sharp [mailto:sarah.a.sharp@linux.intel.com] > Sent: Wednesday, August 28, 2013 2:52 PM > > On Mon, Aug 26, 2013 at 07:37:56PM +0000, Paul Zimmerman wrote: > > > From: Sarah Sharp [mailto:sarah.a.sharp@linux.intel.com] > > > Sent: Monday, August 26, 2013 12:14 PM > > > > > > On Thu, Aug 22, 2013 at 05:11:49AM +0000, Paul Zimmerman wrote: > > > > > From: Julius Werner > > > > > Sent: Wednesday, August 21, 2013 9:22 PM > > > > > > > > > > > You need the USB 2.0 spec errata from 2011-11 that describes the changes > > > > > > made for BESL as well. It's in the USB2-LPM-Errata-final.pdf and > > > > > > USB2_LinkPowerMangement_ECN[final].pdf files in this zip file: > > > > > > > > > > > > http://www.usb.org/developers/docs/usb_20_070113.zip > > > > > > > > > > > > I agree though, it's all a confusing mess for documentation on USB 2.0 > > > > > > Link PM. > > > > > > > > > > Thanks, I hadn't found that first one yet. Do you also have a link for > > > > > the updated XHCI specification or a separate erratum document > > > > > describing the PORTHLPMC register referenced in the BESL patches (they > > > > > don't exist on DWC3, but I'm still curious)? > > > > > > > > Just to set the record straight :) > > > > > > > > The PORTHLPMC registers do exist on DWC3, starting with the 1.90a version > > > > of the core or thereabouts. They only supported the HIRD flavor of LPM, > > > > though. Only fairly recently has support for BESL been added, around > > > > version 2.41a or so. > > > > > > And the 2.41a version that supports BESL properly sets the BLC flag in > > > the USB 2.0 Protocol extended capabilities for all the USB 2.0 ports? > > > Has this functionality been well-tested? > > > > In 2.41a it is described as an "early adopter" feature in the databook, > > and no mention is made of the BLC flag. So the answer there is "maybe". > > Starting with 2.50a it is a full-fledged feature and the databook does > > describe the BLC flag. > > So the 2.41a has BESL support, but may not set the BLC flag. What > happens if we use the HIRD encoding instead? Will things break? It > seems like we would need to disable USB 2.0 LPM on that host all > together, if it expects BESL encoding, but advertises HIRD encoding. I imagine things would break, but I don't know for sure. I don't have a 2.41a version of the core to test this with. Maybe the LPM support should be disabled by default, and enabled with a quirk? That seems safer to me. > > So it may be safer to say that the feature is present starting with 2.50a. > > Is there a way we can tell the difference between a 2.41a xHCI host and > a 2.50a host? If so, we can add a quirk to disable LPM on the 2.41a > host. Once you know it is a Synopsys core, there is a vendor-specific register that shows the version. But that register is at offset 0xC120, which is above the normal xHCI register space I believe, so we may not be able to depend on it being accessible. And you have the problem of how to determine if it is a Synopsys core to begin with. So IMHO, having LPM disabled by default, and enabled with a quirk based on the PCI Vendor/Product ID, or a DT attribute for platform devices, would be the way to go. > > In 2.51a it has been well-tested in simulation. In actual hardware, it > > has only been briefly tested in an ad-hoc sort of way, since none of the > > standard drivers in the market support the feature yet, as far as we know. > > > > Once the support is fully working in the Linux driver we can try testing > > it there. > > Can you please test Julius' patch on the 2.41a, 2.50a, and 2.51a hosts? > Please test against usb-next, since that includes a fix for the BESL > patches. As I said, I don't have the 2.41a version available to test. I do have 2.50a and 2.60a available, so I can try those. -- Paul -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/