Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757440Ab3IALSb (ORCPT ); Sun, 1 Sep 2013 07:18:31 -0400 Received: from mail-ea0-f175.google.com ([209.85.215.175]:33550 "EHLO mail-ea0-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752825Ab3IALSH (ORCPT ); Sun, 1 Sep 2013 07:18:07 -0400 From: Zubair Lutfullah To: jic23@cam.ac.uk, dmitry.torokhov@gmail.com Cc: linux-iio@vger.kernel.org, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, bigeasy@linutronix.de, gregkh@linuxfoundation.org, zubair.lutfullah@gmail.com Subject: [PATCH 2/2] iio: ti_am335x_adc: Add continuous sampling support Date: Sun, 1 Sep 2013 12:17:57 +0100 Message-Id: <1378034277-26728-3-git-send-email-zubair.lutfullah@gmail.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1378034277-26728-1-git-send-email-zubair.lutfullah@gmail.com> References: <1378034277-26728-1-git-send-email-zubair.lutfullah@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13852 Lines: 455 Previously the driver had only one-shot reading functionality. This patch adds triggered buffer support to the driver. Continuous sampling starts when buffer is enabled. And samples are pushed to userpace by the trigger which triggers automatically at every hardware interrupt of FIFO1 filling with samples upto threshold value. Userspace responsibility to stop sampling by writing zero in the buffer enable file. Patil Rachna (TI) laid the ground work for ADC HW register access. Russ Dill (TI) fixed bugs in the driver relevant to FIFOs and IRQs. I fixed channel scanning so multiple ADC channels can be read simultaneously and pushed to userspace. Restructured the driver to fit IIO ABI. And added trigger support. Signed-off-by: Zubair Lutfullah Acked-by: Greg Kroah-Hartman Signed-off-by: Russ Dill Acked-by: Lee Jones Acked-by: Sebastian Andrzej Siewior --- drivers/iio/adc/Kconfig | 1 + drivers/iio/adc/ti_am335x_adc.c | 243 +++++++++++++++++++++++++++++++--- include/linux/mfd/ti_am335x_tscadc.h | 13 ++ 3 files changed, 237 insertions(+), 20 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 09371cb..cfa2039 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -167,6 +167,7 @@ config TI_ADC081C config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Texas Instruments ADC driver which is also a MFD client. diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index a952538..1626e16 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -24,16 +24,23 @@ #include #include #include -#include #include #include +#include +#include +#include +#include struct tiadc_device { struct ti_tscadc_dev *mfd_tscadc; int channels; u8 channel_line[8]; u8 channel_step[8]; + int irq; + int buffer_en_ch_steps; + struct iio_trigger *trig; + u32 *data; }; static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg) @@ -56,10 +63,16 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev) return step_en; } -static void tiadc_step_config(struct tiadc_device *adc_dev) +static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan) { + return 1 << adc_dev->channel_step[chan]; +} + +static void tiadc_step_config(struct iio_dev *indio_dev) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); unsigned int stepconfig; - int i, steps; + int i, steps, chan; /* * There are 16 configurable steps and 8 analog input @@ -72,11 +85,13 @@ static void tiadc_step_config(struct tiadc_device *adc_dev) */ steps = TOTAL_STEPS - adc_dev->channels; - stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1; + if (iio_buffer_enabled(indio_dev)) + stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1 + | STEPCONFIG_MODE_SWCNT; + else + stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1; for (i = 0; i < adc_dev->channels; i++) { - int chan; - chan = adc_dev->channel_line[i]; tiadc_writel(adc_dev, REG_STEPCONFIG(steps), stepconfig | STEPCONFIG_INP(chan)); @@ -85,7 +100,167 @@ static void tiadc_step_config(struct tiadc_device *adc_dev) adc_dev->channel_step[i] = steps; steps++; } +} + +static irqreturn_t tiadc_irq(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct tiadc_device *adc_dev = iio_priv(indio_dev); + unsigned int status, config; + status = tiadc_readl(adc_dev, REG_IRQSTATUS); + + /* + * ADC and touchscreen share the IRQ line. + * FIFO0 interrupts are used by TSC. Handle FIFO1 IRQs here only + */ + if (status & IRQENB_FIFO1OVRRUN) { + /* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */ + config = tiadc_readl(adc_dev, REG_CTRL); + config &= ~(CNTRLREG_TSCSSENB); + tiadc_writel(adc_dev, REG_CTRL, config); + tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN + | IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES); + tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB)); + return IRQ_HANDLED; + } else if (status & IRQENB_FIFO1THRES) { + /* Trigger to push FIFO data to iio buffer */ + tiadc_writel(adc_dev, REG_IRQCLR, IRQENB_FIFO1THRES); + iio_trigger_poll(indio_dev->trig, iio_get_time_ns()); + return IRQ_HANDLED; + } else + return IRQ_NONE; + +} + +static irqreturn_t tiadc_trigger_h(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct tiadc_device *adc_dev = iio_priv(indio_dev); + int i, k, fifo1count, read; + u32 *data = adc_dev->data; + + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + for (k = 0; k < fifo1count; k = k + i) { + for (i = 0; i < (indio_dev->scan_bytes)/4; i++) { + read = tiadc_readl(adc_dev, REG_FIFO1); + data[i] = read & FIFOREAD_DATA_MASK; + } + iio_push_to_buffers(indio_dev, (u8 *) data); + } + tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES); + tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int tiadc_buffer_preenable(struct iio_dev *indio_dev) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); + int i, fifo1count, read; + + tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES | + IRQENB_FIFO1OVRRUN | + IRQENB_FIFO1UNDRFLW)); + + /* Flush FIFO before starting sampling */ + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + for (i = 0; i < fifo1count; i++) + read = tiadc_readl(adc_dev, REG_FIFO1); + + return iio_sw_buffer_preenable(indio_dev); +} + +static int tiadc_buffer_postenable(struct iio_dev *indio_dev) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); + struct iio_buffer *buffer = indio_dev->buffer; + unsigned int enb = 0; + u8 bit; + + adc_dev->data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (adc_dev->data == NULL) + return -ENOMEM; + + tiadc_step_config(indio_dev); + for_each_set_bit(bit, buffer->scan_mask, adc_dev->channels) + enb |= (get_adc_step_bit(adc_dev, bit) << 1); + adc_dev->buffer_en_ch_steps = enb; + + am335x_tsc_se_set(adc_dev->mfd_tscadc, enb); + + tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES + | IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW); + tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES + | IRQENB_FIFO1OVRRUN); + + return iio_triggered_buffer_postenable(indio_dev); +} + +static int tiadc_buffer_predisable(struct iio_dev *indio_dev) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); + int fifo1count, i, read; + + tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES | + IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW)); + am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps); + + /* Flush FIFO of any leftover data */ + fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); + for (i = 0; i < fifo1count; i++) + read = tiadc_readl(adc_dev, REG_FIFO1); + + return iio_triggered_buffer_predisable(indio_dev); +} + +static int tiadc_buffer_postdisable(struct iio_dev *indio_dev) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); + + tiadc_step_config(indio_dev); + kfree(adc_dev->data); + return 0; +} + +static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = { + .preenable = &tiadc_buffer_preenable, + .postenable = &tiadc_buffer_postenable, + .predisable = &tiadc_buffer_predisable, + .postdisable = &tiadc_buffer_postdisable, +}; + +static const struct iio_trigger_ops tiadc_trigger_ops = { + .owner = THIS_MODULE, +}; + +static int tiadc_iio_allocate_trigger(struct iio_dev *indio_dev) +{ + struct tiadc_device *adc_dev = iio_priv(indio_dev); + struct iio_trigger *trig = adc_dev->trig; + int ret; + + trig = iio_trigger_alloc("%s-dev%d", indio_dev->name, indio_dev->id); + if (trig == NULL) + return -ENOMEM; + + trig->dev.parent = indio_dev->dev.parent; + trig->ops = &tiadc_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + ret = iio_trigger_register(trig); + if (ret) + goto err_free_trigger; + + return 0; + +err_free_trigger: + iio_trigger_free(adc_dev->trig); + + return ret; } static const char * const chan_name_ain[] = { @@ -120,6 +295,7 @@ static int tiadc_channel_init(struct iio_dev *indio_dev, int channels) chan->channel = adc_dev->channel_line[i]; chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); chan->datasheet_name = chan_name_ain[chan->channel]; + chan->scan_index = i; chan->scan_type.sign = 'u'; chan->scan_type.realbits = 12; chan->scan_type.storagebits = 32; @@ -142,11 +318,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, struct tiadc_device *adc_dev = iio_priv(indio_dev); int i, map_val; unsigned int fifo1count, read, stepid; - u32 step = UINT_MAX; bool found = false; u32 step_en; unsigned long timeout = jiffies + usecs_to_jiffies (IDLE_TIMEOUT * adc_dev->channels); + + if (iio_buffer_enabled(indio_dev)) + return -EBUSY; + step_en = get_adc_step_mask(adc_dev); am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en); @@ -168,15 +347,6 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, * Hence we need to flush out this data. */ - for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) { - if (chan->channel == adc_dev->channel_line[i]) { - step = adc_dev->channel_step[i]; - break; - } - } - if (WARN_ON_ONCE(step == UINT_MAX)) - return -EINVAL; - fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); for (i = 0; i < fifo1count; i++) { read = tiadc_readl(adc_dev, REG_FIFO1); @@ -231,26 +401,49 @@ static int tiadc_probe(struct platform_device *pdev) channels++; } adc_dev->channels = channels; + adc_dev->irq = adc_dev->mfd_tscadc->irq; indio_dev->dev.parent = &pdev->dev; indio_dev->name = dev_name(&pdev->dev); indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &tiadc_info; - tiadc_step_config(adc_dev); + tiadc_step_config(indio_dev); + tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD); err = tiadc_channel_init(indio_dev, adc_dev->channels); if (err < 0) return err; - err = iio_device_register(indio_dev); + err = tiadc_iio_allocate_trigger(indio_dev); if (err) goto err_free_channels; + err = request_irq(adc_dev->irq, tiadc_irq, IRQF_SHARED, + indio_dev->name, indio_dev); + if (err) + goto err_unregister_trigger; + + err = iio_triggered_buffer_setup(indio_dev, NULL, + &tiadc_trigger_h, &tiadc_buffer_setup_ops); + if (err) + goto err_free_irq; + + err = iio_device_register(indio_dev); + if (err) + goto err_buffer_unregister; + platform_set_drvdata(pdev, indio_dev); return 0; +err_buffer_unregister: + iio_buffer_unregister(indio_dev); +err_free_irq: + free_irq(adc_dev->irq, indio_dev); +err_unregister_trigger: + iio_trigger_unregister(adc_dev->trig); + iio_trigger_free(adc_dev->trig); err_free_channels: tiadc_channels_remove(indio_dev); return err; @@ -262,7 +455,11 @@ static int tiadc_remove(struct platform_device *pdev) struct tiadc_device *adc_dev = iio_priv(indio_dev); u32 step_en; + iio_trigger_unregister(adc_dev->trig); + iio_trigger_free(adc_dev->trig); + free_irq(adc_dev->irq, indio_dev); iio_device_unregister(indio_dev); + iio_buffer_unregister(indio_dev); tiadc_channels_remove(indio_dev); step_en = get_adc_step_mask(adc_dev); @@ -298,10 +495,16 @@ static int tiadc_resume(struct device *dev) /* Make sure ADC is powered up */ restore = tiadc_readl(adc_dev, REG_CTRL); - restore &= ~(CNTRLREG_POWERDOWN); + restore &= ~(CNTRLREG_TSCSSENB); tiadc_writel(adc_dev, REG_CTRL, restore); - tiadc_step_config(adc_dev); + tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD); + tiadc_step_config(indio_dev); + + /* Make sure ADC is powered up */ + restore &= ~(CNTRLREG_POWERDOWN); + restore |= CNTRLREG_TSCSSENB; + tiadc_writel(adc_dev, REG_CTRL, restore); return 0; } diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index db1791b..a372ebf 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -46,17 +46,25 @@ /* Step Enable */ #define STEPENB_MASK (0x1FFFF << 0) #define STEPENB(val) ((val) << 0) +#define ENB(val) (1 << (val)) +#define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) /* IRQ enable */ #define IRQENB_HW_PEN BIT(0) #define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO0OVRRUN BIT(3) +#define IRQENB_FIFO0UNDRFLW BIT(4) #define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_FIFO1OVRRUN BIT(6) +#define IRQENB_FIFO1UNDRFLW BIT(7) #define IRQENB_PENUP BIT(9) /* Step Configuration */ #define STEPCONFIG_MODE_MASK (3 << 0) #define STEPCONFIG_MODE(val) ((val) << 0) #define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_MODE_SWCNT STEPCONFIG_MODE(1) #define STEPCONFIG_AVG_MASK (7 << 2) #define STEPCONFIG_AVG(val) ((val) << 2) #define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) @@ -124,6 +132,7 @@ #define MAX_CLK_DIV 7 #define TOTAL_STEPS 16 #define TOTAL_CHANNELS 8 +#define FIFO1_THRESHOLD 19 /* * ADC runs at 3MHz, and it takes @@ -153,6 +162,10 @@ struct ti_tscadc_dev { /* adc device */ struct adc_device *adc; + + /* Context save */ + unsigned int irqstat; + unsigned int ctrl; }; static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/