Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754657Ab3IKFs3 (ORCPT ); Wed, 11 Sep 2013 01:48:29 -0400 Received: from par-mx.meas-spec.com ([198.190.228.177]:45762 "EHLO par-mx.meas-spec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751556Ab3IKFs1 convert rfc822-to-8bit (ORCPT ); Wed, 11 Sep 2013 01:48:27 -0400 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Subject: RE: [PATCH] hwmon: (ms5637) Add Measurement Specialties MS5637 support Date: Wed, 11 Sep 2013 07:48:03 +0200 Message-ID: In-Reply-To: <20130910152043.GA9165@roeck-us.net> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [PATCH] hwmon: (ms5637) Add Measurement Specialties MS5637 support Thread-Index: Ac6uOWGR9IQziT5iTb2tHrh4J76CegAeOviQ References: <20130828161804.GB5278@roeck-us.net> <20130829094052.GA19239@roeck-us.net> <20130910152043.GA9165@roeck-us.net> From: "Markezana, William" To: "Guenter Roeck" Cc: , , X-OriginalArrivalTime: 11 Sep 2013 05:48:04.0880 (UTC) FILETIME=[7C0A8900:01CEAEB2] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11184 Lines: 366 Hi Guenter, Thank you for your feedback, I will rewrite the drivers for IIO then. Best regards, William MARKEZANA Direct?: + 33 (0) 582 082 286 http://www.meas-spec.com -----Message d'origine----- De?: Guenter Roeck [mailto:groeck7@gmail.com] De la part de Guenter Roeck Envoy??: mardi 10 septembre 2013 17:21 ??: Markezana, William Cc?: khali@linux-fr.org; lm-sensors@lm-sensors.org; linux-kernel@vger.kernel.org Objet?: Re: [PATCH] hwmon: (ms5637) Add Measurement Specialties MS5637 support On Tue, Sep 10, 2013 at 05:09:57PM +0200, Markezana, William wrote: > From: William Markezana > > hwmon: (ms5637) Add Measurement Specialties MS5637support > Signed-off-by: William Markezana Hi William, "pressure" is hardly a hardware monitoring attribute. It might make more sense to add your driver to the iio subsystem, which already supports at least one other pressure sensor. Thanks, Guenter > --- > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index > 55973cd..c4f1c8e 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -954,6 +954,16 @@ config SENSORS_MCP3021 > This driver can also be built as a module. If so, the module > will be called mcp3021. > > +config SENSORS_MS5637 > + tristate "Measurement Specialties MS5637 pressure sensors" > + depends on I2C > + help > + If you say yes here you get support for the Measurement Specialties > + MS5637 pressure sensors. > + > + This driver can also be built as a module. If so, the module > + will be called ms5637. > + > config SENSORS_NCT6775 > tristate "Nuvoton NCT6775F and compatibles" > depends on !PPC > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index > ec7cde0..5d8f699 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -110,6 +110,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o > obj-$(CONFIG_SENSORS_MAX6697) += max6697.o > obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o > obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o > +obj-$(CONFIG_SENSORS_MS5637) += ms5637.o > obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o > obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o > obj-$(CONFIG_SENSORS_PC87360) += pc87360.o > diff --git a/drivers/hwmon/ms5637.c b/drivers/hwmon/ms5637.c new file > mode 100644 index 0000000..fe2c2df > --- /dev/null > +++ b/drivers/hwmon/ms5637.c > @@ -0,0 +1,302 @@ > +/* > + * Measurement Specialties MS5637 pressure and temperature sensor > +driver > + * > + * Copyright (C) 2013 William Markezana > + > + * > + * This program is free software; you can redistribute it and/or > +modify > + * it under the terms of the GNU General Public License as published > +by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +/* MS5637 Commands */ > +#define MS5637_CONVERT_D1_OSR_4096 (0x48) > +#define MS5637_CONVERT_D2_OSR_4096 (0x58) > +#define MS5637_ADC_READ (0x00) > +#define MS5637_PROM_READ (0xA0) > + > +struct ms5637 { > + struct device *hwmon_dev; > + struct mutex lock; > + bool valid; > + unsigned long last_update; > + int temperature; > + int pressure; > + unsigned short calibration_words[6]; > + bool got_calibration_words; > +}; > + > +static int ms5637_get_calibration_word(struct i2c_client *client, > + unsigned char address, unsigned short *word) { > + int ret = 0; > + ret = i2c_smbus_read_word_swapped(client, > + MS5637_PROM_READ + (address << 1)); > + if (ret < 0) > + return ret; > + *word = (unsigned short)ret & 0xFFFF; > + return 0; > +} > + > +static int ms5637_fill_calibration_words(struct i2c_client *client) { > + int i, ret = 0; > + struct ms5637 *ms5637 = i2c_get_clientdata(client); > + > + for (i = 0; i < 6; i++) { > + ret = ms5637_get_calibration_word(client, i+1, > + &ms5637->calibration_words[i]); > + if (ret < 0) { > + dev_err(&client->dev, > + "unable to get calibration word at address %d\n", > + i+1); > + return ret; > + } > + } > + return 0; > +} > + > +static int ms5637_get_adc_value(struct i2c_client *client, > + unsigned int *adc_value) > +{ > + int ret = 0; > + unsigned char buf[3]; > + ret = i2c_smbus_read_i2c_block_data(client, MS5637_ADC_READ, 3, buf); > + if (ret < 0) > + return ret; > + *adc_value = (buf[0] << 16) + (buf[1] << 8) + buf[2]; > + return 0; > +} > + > +static int ms5637_get_conversion_result(struct i2c_client *client, > + unsigned char command, unsigned int *adc_value) { > + int ret; > + > + ret = i2c_smbus_write_byte(client, command); > + if (ret < 0) > + return ret; > + msleep(9); > + ret = ms5637_get_adc_value(client, adc_value); > + if (ret < 0) > + return ret; > + return 0; > +} > + > +static int ms5637_update_measurements(struct i2c_client *client) { > + int ret = 0; > + unsigned int d1, d2; > + int dt, temp, p; > + long long int off, sens; > + struct ms5637 *ms5637 = i2c_get_clientdata(client); > + > + mutex_lock(&ms5637->lock); > + > + if (time_after(jiffies, ms5637->last_update + HZ / 2) || > + !ms5637->valid) { > + > + if (!ms5637->got_calibration_words) { > + ret = ms5637_fill_calibration_words(client); > + if (ret < 0) { > + dev_err(&client->dev, > + "unable to get calibration words\n"); > + goto out; > + } > + > + ms5637->got_calibration_words = true; > + } > + > + ret = ms5637_get_conversion_result(client, > + MS5637_CONVERT_D1_OSR_4096, &d1); > + if (ret < 0) { > + dev_err(&client->dev, > + "unable to get adc conversion of D1_OSR_4096\n"); > + goto out; > + } > + > + ret = ms5637_get_conversion_result(client, > + MS5637_CONVERT_D2_OSR_4096, &d2); > + if (ret < 0) { > + dev_err(&client->dev, > + "unable to get adc conversion of D2_OSR_4096\n"); > + goto out; > + } > + > + dt = d2 - (int)ms5637->calibration_words[4] * 256; > + temp = 20000 + div_s64((long long int)dt * > + (long long int)ms5637->calibration_words[5], 838861); > + > + off = (long long int)ms5637->calibration_words[1] * 131072 + > + div_s64((long long int)ms5637->calibration_words[3] * > + (long long int)dt, 64); > + sens = (long long int)ms5637->calibration_words[0] * 65536 + > + div_s64((long long int)ms5637->calibration_words[2] * > + (long long int)dt, 128); > + p = (int)div_s64((div_s64((long long int)d1 * sens, 2097152) - > + off), 3277); > + > + ms5637->temperature = temp; > + ms5637->pressure = p; > + ms5637->last_update = jiffies; > + ms5637->valid = true; > + } > +out: > + mutex_unlock(&ms5637->lock); > + > + return ret >= 0 ? 0 : ret; > +} > + > +static ssize_t ms5637_show_temperature(struct device *dev, > + struct device_attribute *attr, char *buf) { > + struct i2c_client *client = to_i2c_client(dev); > + struct ms5637 *ms5637 = i2c_get_clientdata(client); > + int ret = ms5637_update_measurements(client); > + if (ret < 0) > + return ret; > + return sprintf(buf, "%d\n", ms5637->temperature); } > + > +static ssize_t ms5637_show_pressure(struct device *dev, > + struct device_attribute *attr, char *buf) { > + struct i2c_client *client = to_i2c_client(dev); > + struct ms5637 *ms5637 = i2c_get_clientdata(client); > + int ret = ms5637_update_measurements(client); > + if (ret < 0) > + return ret; > + return sprintf(buf, "%d\n", ms5637->pressure); } > + > +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, > + ms5637_show_temperature, NULL, 0); static > +SENSOR_DEVICE_ATTR(pressure1_input, S_IRUGO, > + ms5637_show_pressure, NULL, 0); > + > +static struct attribute *ms5637_attributes[] = { > + &sensor_dev_attr_temp1_input.dev_attr.attr, > + &sensor_dev_attr_pressure1_input.dev_attr.attr, > + NULL > +}; > + > +static const struct attribute_group ms5637_group = { > + .attrs = ms5637_attributes, > +}; > + > +static int ms5637_probe(struct i2c_client *client, > + const struct i2c_device_id *id) { > + struct ms5637 *ms5637; > + int err; > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_READ_WORD_DATA)) { > + dev_err(&client->dev, > + "adapter does not support SMBus word transactions\n"); > + return -ENODEV; > + } > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_WRITE_BYTE)) { > + dev_err(&client->dev, > + "adapter does not support SMBus byte transactions\n"); > + return -ENODEV; > + } > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { > + dev_err(&client->dev, > + "adapter does not support SMBus block transactions\n"); > + return -ENODEV; > + } > + > + ms5637 = devm_kzalloc(&client->dev, sizeof(*ms5637), GFP_KERNEL); > + if (!ms5637) > + return -ENOMEM; > + > + i2c_set_clientdata(client, ms5637); > + > + mutex_init(&ms5637->lock); > + > + err = sysfs_create_group(&client->dev.kobj, &ms5637_group); > + if (err) { > + dev_dbg(&client->dev, "could not create sysfs files\n"); > + return err; > + } > + ms5637->hwmon_dev = hwmon_device_register(&client->dev); > + if (IS_ERR(ms5637->hwmon_dev)) { > + dev_dbg(&client->dev, "unable to register hwmon device\n"); > + err = PTR_ERR(ms5637->hwmon_dev); > + goto error; > + } > + > + mutex_lock(&ms5637->lock); > + err = ms5637_fill_calibration_words(client); > + if (err >= 0) > + ms5637->got_calibration_words = true; > + mutex_unlock(&ms5637->lock); > + > + dev_info(&client->dev, "initialized\n"); > + > + return 0; > + > +error: > + sysfs_remove_group(&client->dev.kobj, &ms5637_group); > + return err; > +} > + > +static int ms5637_remove(struct i2c_client *client) { > + struct ms5637 *ms5637 = i2c_get_clientdata(client); > + > + hwmon_device_unregister(ms5637->hwmon_dev); > + sysfs_remove_group(&client->dev.kobj, &ms5637_group); > + > + return 0; > +} > + > +static const struct i2c_device_id ms5637_id[] = { > + { "ms5637", 0 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, ms5637_id); > + > +static struct i2c_driver ms5637_driver = { > + .class = I2C_CLASS_HWMON, > + .driver = { > + .name = "ms5637", > + }, > + .probe = ms5637_probe, > + .remove = ms5637_remove, > + .id_table = ms5637_id, > +}; > + > +module_i2c_driver(ms5637_driver); > + > +MODULE_AUTHOR("William Markezana "); > +MODULE_DESCRIPTION("MEAS MS5637 pressure and temperature sensor > +driver"); MODULE_LICENSE("GPL"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/