Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754541Ab3ILPlH (ORCPT ); Thu, 12 Sep 2013 11:41:07 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:36363 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753558Ab3ILPlD (ORCPT ); Thu, 12 Sep 2013 11:41:03 -0400 From: Sricharan R To: , , , , CC: , , , , , , Subject: [RFC PATCH 3/4] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs. Date: Thu, 12 Sep 2013 21:09:10 +0530 Message-ID: <1379000351-15672-4-git-send-email-r.sricharan@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1379000351-15672-1-git-send-email-r.sricharan@ti.com> References: <1379000351-15672-1-git-send-email-r.sricharan@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10429 Lines: 390 Now with the crossbar IP in picture, the peripherals do not have the fixed interrupt lines. Instead they rely on the crossbar irqchip to allocate and map a free interrupt line to its crossbar input. So replacing all the peripheral interrupt numbers with its fixed crossbar input lines. Signed-off-by: Sricharan R --- arch/arm/boot/dts/dra7.dtsi | 88 +++++++++++++++++++++---------------------- 1 file changed, 44 insertions(+), 44 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index da977e1..2c541af 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -104,10 +104,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = <0 12 0x4>, - <0 13 0x4>, - <0 14 0x4>, - <0 15 0x4>; + interrupts = <0 7 0x4>, + <0 8 0x4>, + <0 9 0x4>, + <0 10 0x4>; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -116,7 +116,7 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = <0 29 0x4>; + interrupts = <0 24 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -127,7 +127,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = <0 30 0x4>; + interrupts = <0 25 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -138,7 +138,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = <0 31 0x4>; + interrupts = <0 26 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -149,7 +149,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = <0 32 0x4>; + interrupts = <0 27 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -160,7 +160,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = <0 33 0x4>; + interrupts = <0 28 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -171,7 +171,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = <0 34 0x4>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -182,7 +182,7 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = <0 35 0x4>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -193,7 +193,7 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = <0 121 0x4>; + interrupts = <0 116 0x4>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -204,7 +204,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <0 72 0x4>; + interrupts = <0 67 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; @@ -212,7 +212,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <0 73 0x4>; + interrupts = <0 68 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -220,7 +220,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <0 74 0x4>; + interrupts = <0 69 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -228,7 +228,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <0 70 0x4>; + interrupts = <0 65 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -236,7 +236,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <0 105 0x4>; + interrupts = <0 100 0x4>; ti,hwmods = "uart5"; clock-frequency = <48000000>; }; @@ -244,7 +244,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <0 106 0x4>; + interrupts = <0 101 0x4>; ti,hwmods = "uart6"; clock-frequency = <48000000>; }; @@ -252,7 +252,7 @@ timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = <0 37 0x4>; + interrupts = <0 32 0x4>; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -260,28 +260,28 @@ timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = <0 38 0x4>; + interrupts = <0 33 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = <0 39 0x4>; + interrupts = <0 34 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = <0 40 0x4>; + interrupts = <0 35 0x4>; ti,hwmods = "timer4"; }; timer5: timer@48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; - interrupts = <0 41 0x4>; + interrupts = <0 36 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -289,7 +289,7 @@ timer6: timer@48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; - interrupts = <0 42 0x4>; + interrupts = <0 37 0x4>; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -298,7 +298,7 @@ timer7: timer@48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; - interrupts = <0 43 0x4>; + interrupts = <0 38 0x4>; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -306,7 +306,7 @@ timer8: timer@48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; - interrupts = <0 44 0x4>; + interrupts = <0 39 0x4>; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -315,21 +315,21 @@ timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = <0 45 0x4>; + interrupts = <0 40 0x4>; ti,hwmods = "timer9"; }; timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = <0 46 0x4>; + interrupts = <0 41 0x4>; ti,hwmods = "timer10"; }; timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = <0 47 0x4>; + interrupts = <0 42 0x4>; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -337,21 +337,21 @@ wdt2: wdt@4ae14000 { compatible = "ti,omap4-wdt"; reg = <0x4ae14000 0x80>; - interrupts = <0 80 0x4>; + interrupts = <0 75 0x4>; ti,hwmods = "wd_timer2"; }; dmm: dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + interrupts = <0 108 0x4>; ti,hwmods = "dmm"; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = <0 56 0x4>; + interrupts = <0 51 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -360,7 +360,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = <0 57 0x4>; + interrupts = <0 52 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -369,7 +369,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = <0 61 0x4>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -378,7 +378,7 @@ i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = <0 62 0x4>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -387,7 +387,7 @@ i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = <0 60 0x4>; + interrupts = <0 55 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -396,7 +396,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = <0 83 0x4>; + interrupts = <0 78 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -407,7 +407,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = <0 86 0x4>; + interrupts = <0 81 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -417,7 +417,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = <0 94 0x4>; + interrupts = <0 89 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -427,7 +427,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = <0 96 0x4>; + interrupts = <0 91 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -437,7 +437,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = <0 65 0x4>; + interrupts = <0 60 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -457,7 +457,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = <0 66 0x4>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -472,7 +472,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = <0 91 0x4>; + interrupts = <0 86 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -484,7 +484,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = <0 48 0x4>; + interrupts = <0 43 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/