Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 19 Oct 2002 11:28:36 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 19 Oct 2002 11:28:36 -0400 Received: from smtpzilla1.xs4all.nl ([194.109.127.137]:5385 "EHLO smtpzilla1.xs4all.nl") by vger.kernel.org with ESMTP id ; Sat, 19 Oct 2002 11:28:28 -0400 Date: Sat, 19 Oct 2002 17:34:17 +0200 From: Jurriaan To: linux-kernel@vger.kernel.org Subject: 2.5.44: problemn when shutting down, drivers/base/power.c and the global_device_list Message-ID: <20021019153417.GA567@middle.of.nowhere> Reply-To: thunder7@xs4all.nl Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i X-Message-Flag: Still using Outlook? Please Upgrade to real software! Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 32379 Lines: 679 When I shut my system down, the last line I saw was Shutting down devices. I've hacked drivers/base/power.c:device_shutdown() like this: void device_shutdown(void) { struct list_head * entry; printk(KERN_EMERG "Shutting down devices\n"); down(&device_sem); list_for_each(entry,&global_device_list) { struct device * dev = to_dev(entry); printk(KERN_EMERG "found device in global_device_list present %d ID '%s' name %s\n", device_present(dev), dev->bus_id ? dev->bus_id : "", dev->name ? dev->name : ""); if (device_present(dev) && dev->driver && dev->driver->shutdown) { pr_debug("shutting down %s\n",dev->name); dev->driver->shutdown(dev); } } up(&device_sem); } And I've enabled DEBUG in drivers/base/core.c. It seems the same 2 devices are being found in my global_device_list alternating, and the list_for_each is in effect an endless loop. dmesg | grep "^DEV:" gives: DEV: registering device: ID = 'sys', name = System Bus DEV: registering device: ID = 'legacy', name = legacy bus DEV: registering device: ID = 'cpu0', name = DEV: registering device: ID = 'cpu1', name = DEV: registering device: ID = 'pci0', name = Host/PCI Bridge DEV: registering device: ID = '00:00.0', name = VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] DEV: registering device: ID = '00:01.0', name = VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] DEV: registering device: ID = '00:07.0', name = VIA Technologies, Inc. VT82C686 [Apollo Super South] DEV: registering device: ID = '00:07.1', name = VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE DEV: registering device: ID = '00:07.2', name = VIA Technologies, Inc. USB DEV: registering device: ID = '00:07.3', name = VIA Technologies, Inc. USB (#2) DEV: registering device: ID = '00:07.4', name = VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] DEV: registering device: ID = '00:09.0', name = Promise Technology, Inc. 20265 DEV: registering device: ID = '00:0a.0', name = LSI Logic / Symbios Logic (formerly NCR) 53c860 DEV: registering device: ID = '00:0b.0', name = Creative Labs SB Live! EMU10k1 DEV: registering device: ID = '00:0b.1', name = Creative Labs SB Live! MIDI/Game Port DEV: registering device: ID = '00:0c.0', name = Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEV: registering device: ID = '00:0e.0', name = Triones Technologies, Inc. HPT366/368/370/370A/372 DEV: registering device: ID = '01:00.0', name = Matrox Graphics, Inc. MGA G400 AGP DEV: registering device: ID = 'pic0', name = i8259A PIC DEV: registering device: ID = 'rtc0', name = i8253 Real Time Clock DEV: registering device: ID = 'fd0', name = DEV: registering device: ID = 'fd1', name = DEV: registering device: ID = 'floppy0', name = Floppy Drive DEV: registering device: ID = 'ide0', name = IDE Controller DEV: registering device: ID = '0.0', name = IDE Drive DEV: registering device: ID = 'ide1', name = IDE Controller DEV: registering device: ID = '1.0', name = IDE Drive DEV: registering device: ID = 'ide2', name = IDE Controller DEV: registering device: ID = '2.0', name = IDE Drive DEV: registering device: ID = 'ide4', name = IDE Controller DEV: registering device: ID = '4.0', name = IDE Drive DEV: registering device: ID = 'ide5', name = IDE Controller DEV: registering device: ID = '5.0', name = IDE Drive DEV: registering device: ID = 'hda', name = DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = DEV: registering device: ID = 'p5', name = DEV: registering device: ID = 'p6', name = DEV: registering device: ID = 'p7', name = DEV: registering device: ID = 'p8', name = DEV: registering device: ID = 'p9', name = DEV: registering device: ID = 'p10', name = DEV: registering device: ID = 'p11', name = DEV: registering device: ID = 'p12', name = DEV: registering device: ID = 'hde', name = DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = DEV: registering device: ID = 'hdi', name = DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = DEV: registering device: ID = 'hdk', name = DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = DEV: registering device: ID = 'scsi0', name = sym53c8xx DEV: registering device: ID = 'scsi0', name = sym53c8xx DEV: registering device: ID = '0:0:1:0', name = DEV: registering device: ID = '0:0:2:0', name = DEV: registering device: ID = '0:0:5:0', name = ZYAMAHA CRW2100S 1.0N DEV: registering device: ID = 'scsi1', name = ide-scsi DEV: registering device: ID = '1:0:0:0', name = DEV: registering device: ID = 'sr0', name = DEV: registering device: ID = 'sr1', name = DEV: registering device: ID = 'sr2', name = DEV: registering device: ID = 'sr3', name = DEV: registering device: ID = '0:0:1:0:gen', name = generic DEV: registering device: ID = '0:0:2:0:gen', name = generic DEV: registering device: ID = '0:0:5:0:gen', name = ZYAMAHA CRW2100S 1.0Ngeneric DEV: registering device: ID = '1:0:0:0:gen', name = generic DEV: registering device: ID = 'usb1', name = USB device 0000:0000 DEV: registering device: ID = '1-0:0', name = usb-00:07.2-0 interface 0 DEV: registering device: ID = 'usb2', name = USB device 0000:0000 DEV: registering device: ID = '2-0:0', name = usb-00:07.3-0 interface 0 DEV: registering device: ID = 'loop0', name = DEV: registering device: ID = 'loop1', name = DEV: registering device: ID = 'loop2', name = DEV: registering device: ID = 'loop3', name = DEV: registering device: ID = 'loop4', name = DEV: registering device: ID = 'loop5', name = DEV: registering device: ID = 'loop6', name = DEV: registering device: ID = 'loop7', name = On shutdown, I see these lines alternating: found device in global_device_list present 1 ID '0:0:5:0:gen' name ZYAMAHA CRW2100S 1.0Ngeneric found device in global_device_list present 1 ID '0:0:2:0:gen' name = generic I can't imagine the global_device_list is corrupt in some way. Any hints? Full dmesg below. I think I'm going to dump the full global_device_list() any time before and after something is added during boot... Thanks, Jurriaan Linux version 2.5.44 (root@middle) (gcc version 2.95.4 20011002 (Debian prerelease)) #4 SMP Sat Oct 19 17:08:45 CEST 2002 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003fff0000 (usable) user: 000000003fff0000 - 000000003fff3000 (ACPI NVS) user: 000000003fff3000 - 0000000040000000 (ACPI data) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5770 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 262128 DMA zone: 4096 pages Normal zone: 225280 pages HighMem zone: 32752 pages Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 6:8 APIC version 17 Processor #1 6:8 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Building zonelist for node : 0 Kernel command line: root=/dev/hda7 video=matrox:vesa:0x11E,fv:80,sgram hdc=scsi apm=power-off mem=1048512K ide_setup: hdc=scsi Initializing CPU#0 Detected 703.169 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1380.35 BogoMIPS Memory: 1033396k/1048512k available (1900k kernel code, 14728k reserved, 1569k data, 332k init, 131008k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Coppermine) stepping 03 per-CPU timeslice cutoff: 730.87 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1404.92 BogoMIPS CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (2785.28 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 69 0d 001 01 0 0 0 0 0 1 1 71 0e 001 01 0 0 0 0 0 1 1 79 0f 001 01 0 0 0 0 0 1 1 81 10 001 01 1 1 0 1 0 1 1 89 11 001 01 1 1 0 1 0 1 1 91 12 001 01 1 1 0 1 0 1 1 99 13 001 01 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 703.0098 MHz. ..... host bus clock speed is 100.0442 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 4294967295 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs DEV: registering device: ID = 'sys', name = System Bus DEV: registering device: ID = 'legacy', name = legacy bus PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1 PCI: Using configuration type 1 Registering system device cpu0 DEV: registering device: ID = 'cpu0', name = adding '' to cpu class interfaces Registering system device cpu1 DEV: registering device: ID = 'cpu1', name = adding '' to cpu class interfaces drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) DEV: registering device: ID = 'pci0', name = Host/PCI Bridge DEV: registering device: ID = '00:00.0', name = VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] DEV: registering device: ID = '00:01.0', name = VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] DEV: registering device: ID = '00:07.0', name = VIA Technologies, Inc. VT82C686 [Apollo Super South] DEV: registering device: ID = '00:07.1', name = VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE DEV: registering device: ID = '00:07.2', name = VIA Technologies, Inc. USB DEV: registering device: ID = '00:07.3', name = VIA Technologies, Inc. USB (#2) DEV: registering device: ID = '00:07.4', name = VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] DEV: registering device: ID = '00:09.0', name = Promise Technology, Inc. 20265 DEV: registering device: ID = '00:0a.0', name = LSI Logic / Symbios Logic (formerly NCR) 53c860 DEV: registering device: ID = '00:0b.0', name = Creative Labs SB Live! EMU10k1 DEV: registering device: ID = '00:0b.1', name = Creative Labs SB Live! MIDI/Game Port DEV: registering device: ID = '00:0c.0', name = Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEV: registering device: ID = '00:0e.0', name = Triones Technologies, Inc. HPT366/368/370/370A/372 DEV: registering device: ID = '01:00.0', name = Matrox Graphics, Inc. MGA G400 AGP PCI: Using IRQ router VIA [1106/0686] at 00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I9,P0) -> 16 PCI->APIC IRQ transform: (B0,I10,P0) -> 17 PCI->APIC IRQ transform: (B0,I11,P0) -> 17 PCI->APIC IRQ transform: (B0,I12,P0) -> 19 PCI->APIC IRQ transform: (B0,I14,P0) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Registering system device pic0 DEV: registering device: ID = 'pic0', name = i8259A PIC Registering system device rtc0 DEV: registering device: ID = 'rtc0', name = i8253 Real Time Clock apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: disabled - APM is not SMP safe (power off active). apm: WARNING: not running on first cpu! Starting kswapd highmem bounce pool size: 64 pages BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) aio_setup: sizeof(struct page) = 40 Journalled Block Device driver loaded Capability LSM initialized PCI: Enabling Via external APIC routing PCI: Via IRQ fixup for 00:07.2, from 9 to 3 PCI: Via IRQ fixup for 00:07.3, from 9 to 3 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 [PCSPP,EPP] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 matroxfb: Matrox G400 (AGP) detected MTRR: setting reg 2 MTRR: setting reg 2 matroxfb: MTRR's turned on matroxfb: 1600x1200x16bpp (virtual: 1600x5241) matroxfb: framebuffer at 0xD0000000, mapped to 0xf8805000, size 33554432 Console: switching to colour frame buffer device 133x54 fb0: MATROX VGA frame buffer device pty: 256 Unix98 ptys configured lp0: using parport0 (polling). Software Watchdog Timer: 0.06, soft_margin: 60 sec, nowayout: 0 block request queues: 128 requests per read queue 128 requests per write queue 8 requests per batch enter congestion at 31 exit congestion at 33 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 DEV: registering device: ID = 'fd0', name = DEV: registering device: ID = 'fd1', name = DEV: registering device: ID = 'floppy0', name = Floppy Drive Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 33073H3, ATA DISK drive DEV: registering device: ID = 'ide0', name = IDE Controller hda: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 DEV: registering device: ID = '0.0', name = IDE Drive hdc: LITE-ON LTR-40125W, ATAPI CD/DVD-ROM drive DEV: registering device: ID = 'ide1', name = IDE Controller hdc: DMA disabled ide1 at 0x170-0x177,0x376 on irq 15 DEV: registering device: ID = '1.0', name = IDE Drive PDC20265: IDE controller at PCI slot 00:09.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA hde: IBM-DTLA-307045, ATA DISK drive DEV: registering device: ID = 'ide2', name = IDE Controller ide2 at 0xac00-0xac07,0xb002 on irq 16 DEV: registering device: ID = '2.0', name = IDE Drive HPT370: IDE controller at PCI slot 00:0e.0 HPT370: chipset revision 3 HPT370: not 100% native mode: will probe irqs later HPT37X: using 33MHz PCI clock ide4: BM-DMA at 0xe000-0xe007, BIOS settings: hdi:DMA, hdj:pio ide5: BM-DMA at 0xe008-0xe00f, BIOS settings: hdk:DMA, hdl:pio hdi: Maxtor 4G120J6, ATA DISK drive DEV: registering device: ID = 'ide4', name = IDE Controller ide4 at 0xd000-0xd007,0xd402 on irq 18 DEV: registering device: ID = '4.0', name = IDE Drive hdk: Maxtor 4G120J6, ATA DISK drive DEV: registering device: ID = 'ide5', name = IDE Controller ide5 at 0xd800-0xd807,0xdc02 on irq 18 DEV: registering device: ID = '5.0', name = IDE Drive hda: host protected area => 1 hda: 60032448 sectors (30737 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(100) DEV: registering device: ID = 'hda', name = hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = DEV: registering device: ID = 'p5', name = DEV: registering device: ID = 'p6', name = DEV: registering device: ID = 'p7', name = DEV: registering device: ID = 'p8', name = DEV: registering device: ID = 'p9', name = DEV: registering device: ID = 'p10', name = DEV: registering device: ID = 'p11', name = DEV: registering device: ID = 'p12', name = hde: host protected area => 1 hde: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63, UDMA(100) DEV: registering device: ID = 'hde', name = hde: hde1 hde2 DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = hdi: host protected area => 1 hdi: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100) DEV: registering device: ID = 'hdi', name = hdi: hdi1 hdi2 DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = hdk: host protected area => 1 hdk: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100) DEV: registering device: ID = 'hdk', name = hdk: hdk1 hdk2 DEV: registering device: ID = 'p1', name = DEV: registering device: ID = 'p2', name = ide-cd: passing drive hdc to ide-scsi emulation. SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 10, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c860 detected sym53c860-0: rev 0x13 on pci bus 0 device 10 function 0 irq 17 sym53c860-0: ID 7, Fast-20, Parity Checking Debug: sleeping function called from illegal context at include/asm/semaphore.h:119 Call Trace: [] __might_sleep+0x54/0x58 [] get_device+0x17/0x70 [] device_initialize+0x61/0x6c [] device_register+0x32/0x6c [] cursor_timer_handler+0x0/0x28 [] tasklet_hi_action+0x85/0xe0 [] do_softirq+0x5a/0xac [] smp_apic_timer_interrupt+0x113/0x124 [] apic_timer_interrupt+0x1a/0x20 [] tasklet_hi_action+0x85/0xe0 [] do_softirq+0x5a/0xac [] smp_apic_timer_interrupt+0x113/0x124 [] apic_timer_interrupt+0x1a/0x20 [] matrox_cfbX_putcs+0x1f9/0x260 [] __alloc_pages+0x90/0x25c [] __get_free_pages+0x3a/0x40 [] do_ccupdate_local+0x0/0x34 [] do_ccupdate_local+0x0/0x34 [] smp_call_function_all_cpus+0x1a/0x2c [] kmem_cache_alloc+0x22/0x16c [] alloc_inode+0x30/0x180 [] alloc_inode+0xf3/0x180 [] new_inode+0xb/0x88 [] driverfs_get_inode+0x10/0xdc [] driverfs_mknod+0x3d/0x48 [] driverfs_mkdir+0x1f/0x2c [] driverfs_create_dir+0x9e/0xd0 [] device_create_dir+0x15/0x1c [] bus_make_dir+0x4c/0x58 [] put_bus+0x13/0x80 [] bus_register+0x93/0x9c [] scsi_register_host+0x39/0x1e4 [] init+0x47/0x1ac [] init+0x0/0x1ac [] kernel_thread_helper+0x5/0xc DEV: registering device: ID = 'scsi0', name = sym53c8xx scsi0 : sym53c8xx-1.7.3c-20010512 DEV: registering device: ID = 'scsi0', name = sym53c8xx sym53c860-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 8) Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1007 Type: CD-ROM ANSI SCSI revision: 02 DEV: registering device: ID = '0:0:1:0', name = sym53c860-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 8) Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 DEV: registering device: ID = '0:0:2:0', name = sym53c860-0-<5,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 7) Vendor: YAMAHA Model: CRW2100S Rev: 1.0N Type: CD-ROM ANSI SCSI revision: 02 DEV: registering device: ID = '0:0:5:0', name = ZYAMAHA CRW2100S 1.0N scsi1 : SCSI host adapter emulation for IDE ATAPI devices DEV: registering device: ID = 'scsi1', name = ide-scsi Vendor: LITE-ON Model: LTR-40125W Rev: WS05 Type: CD-ROM ANSI SCSI revision: 02 DEV: registering device: ID = '1:0:0:0', name = st: Version 20021015, fixed bufsize 32768, wrt 30720, s/g segs 256 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0 Attached scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0 Attached scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 DEV: registering device: ID = 'sr0', name = sr1: scsi-1 drive DEV: registering device: ID = 'sr1', name = sr2: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray DEV: registering device: ID = 'sr2', name = sr3: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray DEV: registering device: ID = 'sr3', name = DEV: registering device: ID = '0:0:1:0:gen', name = generic DEV: registering device: ID = '0:0:2:0:gen', name = generic DEV: registering device: ID = '0:0:5:0:gen', name = ZYAMAHA CRW2100S 1.0Ngeneric DEV: registering device: ID = '1:0:0:0:gen', name = generic matroxfb_crtc2: secondary head of fb0 was registered as fb1 drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 drivers/usb/core/hcd-pci.c: uhci-hcd @ 00:07.2, VIA Technologies, Inc. USB drivers/usb/core/hcd-pci.c: irq 19, io base 0000a400 drivers/usb/core/hcd.c: new USB bus registered, assigned bus number 1 DEV: registering device: ID = 'usb1', name = USB device 0000:0000 DEV: registering device: ID = '1-0:0', name = usb-00:07.2-0 interface 0 drivers/usb/core/hub.c: USB hub found at 0 drivers/usb/core/hub.c: 2 ports detected drivers/usb/core/hcd-pci.c: uhci-hcd @ 00:07.3, VIA Technologies, Inc. USB (#2) drivers/usb/core/hcd-pci.c: irq 19, io base 0000a800 drivers/usb/core/hcd.c: new USB bus registered, assigned bus number 2 DEV: registering device: ID = 'usb2', name = USB device 0000:0000 DEV: registering device: ID = '2-0:0', name = usb-00:07.3-0 interface 0 drivers/usb/core/hub.c: USB hub found at 0 drivers/usb/core/hub.c: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.12: USB Printer Device Class driver drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.6:USB Scanner Driver register interface 'mouse' with class 'input mice: PS/2 mouse device common for all mice input: PC Speaker input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 1152.000 MB/sec 32regs : 896.000 MB/sec pIII_sse : 1408.000 MB/sec pII_mmx : 1568.000 MB/sec p5_mmx : 1652.000 MB/sec raid5: using function: pIII_sse (1408.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Advanced Linux Sound Architecture Driver Version 0.9.0rc3 (Mon Oct 14 16:41:26 2002 UTC). request_module[snd-card-0]: not ready request_module[snd-card-1]: not ready request_module[snd-card-2]: not ready request_module[snd-card-3]: not ready request_module[snd-card-4]: not ready request_module[snd-card-5]: not ready request_module[snd-card-6]: not ready request_module[snd-card-7]: not ready ALSA device list: #0: Sound Blaster Live! at 0xc400, irq 17 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 332k freed Adding 1574328k swap on /dev/hda9. Priority:-1 extents:1 Real Time Clock Driver v1.11 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xfa924000, 00:10:a7:0b:35:1c, IRQ 19 eth0: Identified 8139 chip type 'RTL-8139C' DEV: registering device: ID = 'loop0', name = DEV: registering device: ID = 'loop1', name = DEV: registering device: ID = 'loop2', name = DEV: registering device: ID = 'loop3', name = DEV: registering device: ID = 'loop4', name = DEV: registering device: ID = 'loop5', name = DEV: registering device: ID = 'loop6', name = DEV: registering device: ID = 'loop7', name = loop: loaded (max 8 devices) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M agpgart: Detected Via Apollo Pro chipset agpgart: AGP aperture is 256M @ 0xc0000000 [drm] AGP 0.99 on VIA Apollo Pro @ 0xc0000000 256MB [drm] Initialized mga 3.0.2 20010321 on minor 0 NTFS driver 2.1.0 [Flags: R/O MODULE]. udf: registering filesystem found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide2(33,1), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide2(33,1)) for (ide2(33,1)) Using r5 hash to sort names kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,11), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,11)) for (ide0(3,11)) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide0(3,12), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide0(3,12)) for (ide0(3,12)) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide2(33,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide2(33,2)) for (ide2(33,2)) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide4(56,1), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide4(56,1)) for (ide4(56,1)) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide4(56,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide4(56,2)) for (ide4(56,2)) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide5(57,1), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide5(57,1)) for (ide5(57,1)) Using r5 hash to sort names found reiserfs format "3.6" with standard journal Reiserfs journal params: device ide5(57,2), size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (ide5(57,2)) for (ide5(57,2)) Using r5 hash to sort names NTFS volume version 3.0. FAT: Unrecognized mount option mode eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. -- Tell a man there are 300 billion stars in the universe and he'll believe you. Tell him a seat has wet paint on it and he'll have to touch it to be sure. Anonymous GNU/Linux 2.5.44 SMP/ReiserFS 2x1380 bogomips load av: 0.15 0.14 0.06 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/