Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754561Ab3IOUto (ORCPT ); Sun, 15 Sep 2013 16:49:44 -0400 Received: from ring0.de ([91.143.88.219]:38810 "EHLO smtp.ring0.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754156Ab3IOUtX (ORCPT ); Sun, 15 Sep 2013 16:49:23 -0400 X-Spam-Report: * -1.9 BAYES_00 BODY: Spamwahrscheinlichkeit nach Bayes-Test: 0-1% * [score: 0.0000] From: Sebastian Reichel To: Sebastian Reichel , Linus Walleij , Shubhrajyoti Datta , Carlos Chinea , Paul Walmsley Cc: Kevin Hilman , Tony Lindgren , Russell King , Grant Likely , Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Rob Landley , =?UTF-8?q?=27Beno=C3=AEt=20Cousson=27?= , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, Sebastian Reichel Subject: [RFCv2 3/3] ARM: dts: N900: Add SSI information Date: Sun, 15 Sep 2013 22:44:16 +0200 Message-Id: <1379277856-24571-4-git-send-email-sre@debian.org> X-Mailer: git-send-email 1.8.4.rc3 In-Reply-To: <1379277856-24571-1-git-send-email-sre@debian.org> References: <1379277856-24571-1-git-send-email-sre@debian.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4957 Lines: 174 Add SSI device tree data for OMAP34xx and Nokia N900. Signed-off-by: Sebastian Reichel --- Documentation/devicetree/bindings/hsi/omap_ssi.txt | 73 ++++++++++++++++++++++ arch/arm/boot/dts/omap3-n900.dts | 8 +++ arch/arm/boot/dts/omap34xx.dtsi | 49 +++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/hsi/omap_ssi.txt diff --git a/Documentation/devicetree/bindings/hsi/omap_ssi.txt b/Documentation/devicetree/bindings/hsi/omap_ssi.txt new file mode 100644 index 0000000..e3597eb --- /dev/null +++ b/Documentation/devicetree/bindings/hsi/omap_ssi.txt @@ -0,0 +1,73 @@ +OMAP SSI controller bindings + +Required properties: +- compatible: Should be set to the following value + ti,omap3-ssi (applicable to OMAP34xx devices) +- ti,hwmods: Name of the hwmod associated to the controller, which + is "ssi". +- reg: Contains SSI register address range (base address and + length). +- reg-names: Contains the names of the address ranges. It's + expected, that "sys" and "gdd" address ranges are + provided. +- interrupts: Contains the interrupt information for the controller. +- interrupt-names: Contains the names of the interrupts. It's expected, + that "gdd_mpu" is provided. +- ranges Required as an empty node +- #address-cells Should be set to <1> +- #size-cells Should be set to <1> + +Each port is represented as a sub-node of the ti,omap3-ssi device. + +Required Port sub-node properties: +- compatible: Should be set to the following value + ti,omap3-ssi-port (applicable to OMAP34xx devices) +- reg: Contains port's register address range (base address + and length). +- reg-names: Contains the names of the address ranges. It's + expected, that "tx" and "rx" address ranges are + provided. +- interrupt-parent Should be a phandle for the interrupt controller +- interrupts: Contains the interrupt information for the port. +- interrupt-names: Contains the names of the interrupts. It's expected, + that "mpu_irq0" and "mpu_irq1" are provided. +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE + events for the port. This is an optional board-specific + property. If it's missing the port will not be + enabled. + +Example for Nokia N900: + +ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + ti,hwmods = "ssi"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <55>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi-port@0 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <51>, + <52>; + interrupt-names = "mpu_irq0", + "mpu_irq1"; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + } +} diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 0582356..cc4a3e2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -186,6 +186,14 @@ power = <50>; }; +&ssi_port1 { + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ +}; + +&ssi_port2 { + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 5355d61..393b7a7 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -25,4 +25,53 @@ clock-latency = <300000>; /* From legacy driver */ }; }; + + ocp { + ssi: ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + ti,hwmods = "ssi"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <55>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi_port1: ssi-port@0 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <51>, + <52>; + interrupt-names = "mpu_irq0", + "mpu_irq1"; + }; + + ssi_port2: ssi-port@1 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805b000 0x800>, + <0x4805b800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <53>, + <54>; + interrupt-names = "mpu_irq0", + "mpu_irq1"; + }; + }; + }; }; -- 1.8.4.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/