Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753788Ab3ISMUj (ORCPT ); Thu, 19 Sep 2013 08:20:39 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:34992 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752272Ab3ISMUh (ORCPT ); Thu, 19 Sep 2013 08:20:37 -0400 Message-ID: <523AEC0C.6010005@ti.com> Date: Thu, 19 Sep 2013 17:50:28 +0530 From: George Cherian User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:17.0) Gecko/20130801 Thunderbird/17.0.8 MIME-Version: 1.0 To: Nishanth Menon CC: , Laurent Pinchart , Linus Walleij , Laurent Pinchart , Kuninori Morimoto , "linux-gpio@vger.kernel.org" , Linux Kernel Mailing List , Linux OMAP Mailing List Subject: Re: PCF857x and 16-bit GPIO expanders References: <20130917190732.GD15645@radagast> <2356541.62QktiIBr5@avalon> <20130918173636.GT21559@radagast> <523AB235.1000808@ti.com> <523AE8FF.9020209@ti.com> In-Reply-To: <523AE8FF.9020209@ti.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2437 Lines: 64 On 9/19/2013 5:37 PM, Nishanth Menon wrote: > On 09/19/2013 03:13 AM, George Cherian wrote: >> On 9/18/2013 11:06 PM, Felipe Balbi wrote: >>> Hi, >>> >>> On Wed, Sep 18, 2013 at 07:18:04PM +0200, Laurent Pinchart wrote: >>>> On Wednesday 18 September 2013 13:16:27 Linus Walleij wrote: >>>>> On Tue, Sep 17, 2013 at 9:07 PM, Felipe Balbi wrote: >>>>>> has anyone ever successfully using gpio-pcf857x.c driver with 16-bit >>>>>> gpio expanders ? We're having some issues here where toggling the last >>>>>> gpio pin (gpio 15) on a PCF8575 device causes platform to hang and I >>>>>> can't come up with any explanation of why would it hang... >>>>> Bouncing the question to George, Laurent and Kuninori... >>>> I've got a board with a PCF8575 chip, but it uses I/Os 8 to 14 only as far as >>>> I know. >>>> >>>> I can try toggling I/O 15, but that will need to wait until next week as I'm >>>> currently travelling without access to the hardware. >>> alright, that'd help me a lot :-) Just want to make sure if we're having >>> a board issue, or PCF8575 is a bit screwy ;-) >> Is it on dra7x-evm if so which pcf device (i2c address)? >> The pins i were interested were only 1 and 2 I never tried pin 15. >> >> Just tried toggling through sysfs and it works for me. > When I look at the data sheet for PCF8575[1] Page 7, Figure 4 Write > mode (output) > I see the data writes are of the order: > I2c 1's byte: address > I2c 2'nd byte:P[7-0] > I2c 3rd byte:P[17-10] I read it as an octal numbering. > Note: bits 8,9 are missing not supported. In octal there is no 8 and 9 > > Now [2] claims that it does support PCF8575, however when I look at > line 143[3] > unsigned bit = 1 << offset; > [snip] > if (value) > gpio->out |= bit; > else > gpio->out &= ~bit; > > There is no handling for the skip needed for bits 8 and 9.. Seems to > me like a driver bug. In which case there is no driver bug > [1] http://www.ti.com/lit/ds/symlink/pcf8575.pdf > [2] > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/gpio/gpio-pcf857x.c > [3] > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/gpio/gpio-pcf857x.c#n143 -- -George -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/