Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754237Ab3ISNIM (ORCPT ); Thu, 19 Sep 2013 09:08:12 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:36977 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754082Ab3ISNGZ (ORCPT ); Thu, 19 Sep 2013 09:06:25 -0400 From: Roger Quadros To: , , CC: , , , , , , , Roger Quadros Subject: [RFC PATCH 05/15] phy: omap-pipe3: Add SATA DPLL support Date: Thu, 19 Sep 2013 16:05:33 +0300 Message-ID: <1379595943-14622-6-git-send-email-rogerq@ti.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1379595943-14622-1-git-send-email-rogerq@ti.com> References: <1379595943-14622-1-git-send-email-rogerq@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5311 Lines: 183 USB and SATA DPLLs need different settings. Provide the SATA DPLL settings and use the proper DPLL settings based on device tree compatible_id. Signed-off-by: Roger Quadros --- drivers/phy/phy-omap-pipe3.c | 82 ++++++++++++++++++++++++++-------------- include/linux/phy/omap_pipe3.h | 6 +++ 2 files changed, 60 insertions(+), 28 deletions(-) diff --git a/drivers/phy/phy-omap-pipe3.c b/drivers/phy/phy-omap-pipe3.c index 807ab8a..19d1664 100644 --- a/drivers/phy/phy-omap-pipe3.c +++ b/drivers/phy/phy-omap-pipe3.c @@ -58,29 +58,41 @@ */ # define PLL_IDLE_TIME 100; -struct pipe3_dpll_map { - unsigned long rate; - struct pipe3_dpll_params params; -}; - -static struct pipe3_dpll_map dpll_map[] = { +static struct pipe3_dpll_map dpll_map_usb[] = { {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static struct pipe3_dpll_map dpll_map_sata[] = { + {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ + {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ + {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ + {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ }; -static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(unsigned long rate) +static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3 + *pipe3) { - int i; + unsigned long rate; + struct pipe3_dpll_map *dpll_map = pipe3->dpll_map; - for (i = 0; i < ARRAY_SIZE(dpll_map); i++) { - if (rate == dpll_map[i].rate) - return &dpll_map[i].params; + rate = clk_get_rate(pipe3->sys_clk); + + for (; dpll_map->rate; dpll_map++) { + if (rate == dpll_map->rate) + return &dpll_map->params; } + dev_err(pipe3->dev, + "No DPLL configuration for %lu Hz SYS CLK\n", rate); return 0; } @@ -148,10 +160,8 @@ static int omap_pipe3_dpll_lock(struct omap_pipe3 *phy) struct pipe3_dpll_params *dpll_params; rate = clk_get_rate(phy->sys_clk); - dpll_params = omap_pipe3_get_dpll_params(rate); + dpll_params = omap_pipe3_get_dpll_params(phy); if (!dpll_params) { - dev_err(phy->dev, - "No DPLL configuration for %lu Hz SYS CLK\n", rate); return -EINVAL; } @@ -206,6 +216,25 @@ static struct phy_ops ops = { .owner = THIS_MODULE, }; +#ifdef CONFIG_OF +static const struct of_device_id omap_pipe3_id_table[] = { + { + .compatible = "ti,omap-pipe3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,omap-sata", + .data = dpll_map_sata, + }, + { + .compatible = "ti,omap-usb3", + .data = dpll_map_usb, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_pipe3_id_table); +#endif + static int omap_pipe3_probe(struct platform_device *pdev) { struct omap_pipe3 *phy; @@ -215,9 +244,7 @@ static int omap_pipe3_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct device_node *control_node; struct platform_device *control_pdev; - - if (!node) - return -EINVAL; + const struct of_device_id *match; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); if (!phy) { @@ -225,6 +252,16 @@ static int omap_pipe3_probe(struct platform_device *pdev) return -ENOMEM; } + match = of_match_device(of_match_ptr(omap_pipe3_id_table), &pdev->dev); + if (!match) + return -EINVAL; + + phy->dpll_map = (struct pipe3_dpll_map *)match->data; + if (!phy->dpll_map) { + dev_err(&pdev->dev, "no dpll data\n"); + return -EINVAL; + } + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(phy->pll_ctrl_base)) @@ -354,17 +391,6 @@ static const struct dev_pm_ops omap_pipe3_pm_ops = { #define DEV_PM_OPS NULL #endif -#ifdef CONFIG_OF -static const struct of_device_id omap_pipe3_id_table[] = { - { .compatible = "ti,omap-pipe3" }, - { .compatible = "ti,omap-sata" }, - { .compatible = "ti,omap-pcie" }, - { .compatible = "ti,omap-usb3" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_pipe3_id_table); -#endif - static struct platform_driver omap_pipe3_driver = { .probe = omap_pipe3_probe, .remove = omap_pipe3_remove, diff --git a/include/linux/phy/omap_pipe3.h b/include/linux/phy/omap_pipe3.h index 7329056..86825ca 100644 --- a/include/linux/phy/omap_pipe3.h +++ b/include/linux/phy/omap_pipe3.h @@ -29,6 +29,11 @@ struct pipe3_dpll_params { u32 mf; }; +struct pipe3_dpll_map { + unsigned long rate; + struct pipe3_dpll_params params; +}; + struct omap_pipe3 { void __iomem *pll_ctrl_base; struct device *dev; @@ -36,6 +41,7 @@ struct omap_pipe3 { struct clk *wkupclk; struct clk *sys_clk; struct clk *optclk; + struct pipe3_dpll_map *dpll_map; }; static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset) -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/