Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 20 Oct 2002 14:28:11 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 20 Oct 2002 14:28:11 -0400 Received: from tmr-02.dsl.thebiz.net ([216.238.38.204]:50695 "EHLO gatekeeper.tmr.com") by vger.kernel.org with ESMTP id ; Sun, 20 Oct 2002 14:28:10 -0400 Date: Sun, 20 Oct 2002 14:33:54 -0400 (EDT) From: Bill Davidsen To: "Mr. James W. Laferriere" cc: davidsen , "'linux-kernel@vger.kernel.org'" Subject: Re: NCR adaptor doesn't see devices (was: 2.5.43 aic7xxx segfault) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1020 Lines: 26 On Sat, 19 Oct 2002, Mr. James W. Laferriere wrote: > > Hello Davidsen , I hope the Sym-2 driver is what you are using ? > From the dmesg output I suspect that is not the case . If there > is only the one Symbios/LSI driver I hope it is the Sym-2 > version . Hth , JimL No, the sym-anything seems to be for the newer chopsets, and not the old ncr825. I believe I tried 2.5.38 or so with that driver and it couldn't find a device it liked. I'll try building that module again, but it didn't work and I thought it might be causing a problem trying. Also note that the driver inserts and fails twice (see dmesg) which is not intuitive to me. -- bill davidsen CTO, TMR Associates, Inc Doing interesting things with little computers since 1979. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/