Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750773Ab3IXEQI (ORCPT ); Tue, 24 Sep 2013 00:16:08 -0400 Received: from gw.cm.dream.jp ([59.157.128.2]:40234 "EHLO vsmtp02.cm.dti.ne.jp" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750706Ab3IXEQG (ORCPT ); Tue, 24 Sep 2013 00:16:06 -0400 X-Greylist: delayed 371 seconds by postgrey-1.27 at vger.kernel.org; Tue, 24 Sep 2013 00:16:06 EDT Date: Tue, 24 Sep 2013 13:15:42 +0900 From: takasi-y@ops.dti.ne.jp To: SH-Linux Cc: Magnus Damm , ben.dooks@codethink.co.uk, Shinya Kuribayashi , devicetree@vger.kernel.org, linux-serial@vger.kernel.org, Simon Horman , Paul Mundt , Mike Turquette , linux-kernel@vger.kernel.org Subject: [PATCH 5/6] clk: emev2: Add support for emev2 SMU clocks with DT Message-Id: <20130924131542.f865fad4dec98e024c0d4676@ops.dti.ne.jp> In-Reply-To: <52410F86.4040301@renesas.com> References: <52410F86.4040301@renesas.com> X-Mailer: Sylpheed 3.4.0beta3 (GTK+ 2.24.17; x86_64-unknown-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8196 Lines: 283 Common clock framework version of emev2 clock support. smu_clkdiv and smu_gclk are handled. So far, reparent is not implemented, and is fixed to index #0. SMU and small numbers of clocks are described in emev2.dtsi. That function and numbers of clocks are equivalent to current sh-clkfwk version. It is just enough to run kzm9d-reference. Signed-off-by: Takashi Yoshii --- arch/arm/boot/dts/emev2.dtsi | 84 +++++++++++++++++++++++++++++++ drivers/clk/Makefile | 2 + drivers/clk/shmobile/Makefile | 5 ++ drivers/clk/shmobile/clk-emev2.c | 104 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 195 insertions(+) create mode 100644 drivers/clk/shmobile/Makefile create mode 100644 drivers/clk/shmobile/clk-emev2.c diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 9063a44..c6a4767 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -52,34 +52,118 @@ <0 121 4>; }; + smu { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u1_sclkdiv: usib_u1_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x65c 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u2_sclkdiv: usib_u2_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x65c 16>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u3_sclkdiv: usib_u3_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x660 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; + usib_u1_sclk: usib_u1_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4b8 1>; + clocks = <&usib_u1_sclkdiv>; + #clock-cells = <0>; + }; + usib_u2_sclk: usib_u2_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4bc 1>; + clocks = <&usib_u2_sclkdiv>; + #clock-cells = <0>; + }; + usib_u3_sclk: usib_u3_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4c0 1>; + clocks = <&usib_u3_sclkdiv>; + #clock-cells = <0>; + }; + sti_sclk: sti_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x528 1>; + clocks = <&c32ki>; + #clock-cells = <0>; + }; + }; + sti@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; interrupts = <0 125 0>; + clocks = <&sti_sclk>; + clock-names = "sclk"; }; uart@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; interrupts = <0 8 0>; + clocks = <&usia_u0_sclk>; + clock-names = "sclk"; }; uart@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; interrupts = <0 9 0>; + clocks = <&usib_u1_sclk>; + clock-names = "sclk"; }; uart@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; interrupts = <0 10 0>; + clocks = <&usib_u2_sclk>; + clock-names = "sclk"; }; uart@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; interrupts = <0 11 0>; + clocks = <&usib_u3_sclk>; + clock-names = "sclk"; }; gpio0: gpio@e0050000 { diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 7b11106..3e64ac4 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -32,6 +32,8 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o obj-$(CONFIG_ARCH_ZYNQ) += zynq/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ +obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/ +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/ obj-$(CONFIG_X86) += x86/ diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile new file mode 100644 index 0000000..6a26eb6 --- /dev/null +++ b/drivers/clk/shmobile/Makefile @@ -0,0 +1,5 @@ +ifeq ($(CONFIG_COMMON_CLK), y) +obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o +endif +# for emply built-in.o +obj-n := dummy diff --git a/drivers/clk/shmobile/clk-emev2.c b/drivers/clk/shmobile/clk-emev2.c new file mode 100644 index 0000000..6c7c929 --- /dev/null +++ b/drivers/clk/shmobile/clk-emev2.c @@ -0,0 +1,104 @@ +/* + * EMMA Mobile EV2 common clock framework support + * + * Copyright (C) 2013 Takashi Yoshii + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include + +/* EMEV2 SMU registers */ +#define USIAU0_RSTCTRL 0x094 +#define USIBU1_RSTCTRL 0x0ac +#define USIBU2_RSTCTRL 0x0b0 +#define USIBU3_RSTCTRL 0x0b4 +#define STI_RSTCTRL 0x124 +#define STI_CLKSEL 0x688 + +static DEFINE_SPINLOCK(lock); + +/* not pretty, but hey */ +void __iomem *smu_base; + +static void __init emev2_smu_write(unsigned long value, int offs) +{ + BUG_ON(!smu_base || (offs >= PAGE_SIZE)); + writel_relaxed(value, smu_base + offs); +} + +static const struct of_device_id smu_id[] __initconst = { + { .compatible = "renesas,emev2-smu", }, + {}, +}; + +static void __init emev2_smu_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, smu_id); + BUG_ON(!np); + smu_base = of_iomap(np, 0); + BUG_ON(!smu_base); + of_node_put(np); + + /* setup STI timer to run on 32.768 kHz and deassert reset */ + emev2_smu_write(0, STI_CLKSEL); + emev2_smu_write(1, STI_RSTCTRL); + + /* deassert reset for UART0->UART3 */ + emev2_smu_write(2, USIAU0_RSTCTRL); + emev2_smu_write(2, USIBU1_RSTCTRL); + emev2_smu_write(2, USIBU2_RSTCTRL); + emev2_smu_write(2, USIBU3_RSTCTRL); +} + +static void __init emev2_smu_clkdiv_init(struct device_node *np) +{ + u32 reg[2]; + struct clk *clk; + const char *parent_name = of_clk_get_parent_name(np, 0); + if (WARN_ON(of_property_read_u32_array(np, "reg", reg, 2))) + return; + if (!smu_base) + emev2_smu_init(); + clk = clk_register_divider(NULL, np->name, parent_name, 0, + smu_base + reg[0], reg[1], 8, 0, &lock); + of_clk_add_provider(np, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, np->name, NULL); + pr_debug("## %s %s %p\n", __func__, np->name, clk); +} +CLK_OF_DECLARE(emev2_smu_clkdiv, "renesas,emev2-smu-clkdiv", + emev2_smu_clkdiv_init); + +static void __init emev2_smu_gclk_init(struct device_node *np) +{ + u32 reg[2]; + struct clk *clk; + const char *parent_name = of_clk_get_parent_name(np, 0); + if (WARN_ON(of_property_read_u32_array(np, "reg", reg, 2))) + return; + if (!smu_base) + emev2_smu_init(); + clk = clk_register_gate(NULL, np->name, parent_name, 0, + smu_base + reg[0], reg[1], 0, &lock); + of_clk_add_provider(np, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, np->name, NULL); + pr_debug("## %s %s %p\n", __func__, np->name, clk); +} +CLK_OF_DECLARE(emev2_smu_gclk, "renesas,emev2-smu-gclk", emev2_smu_gclk_init); -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/