Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755158Ab3IYTHH (ORCPT ); Wed, 25 Sep 2013 15:07:07 -0400 Received: from mx1.redhat.com ([209.132.183.28]:42604 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751242Ab3IYTHB (ORCPT ); Wed, 25 Sep 2013 15:07:01 -0400 Message-ID: <1380136001.3030.380.camel@ul30vt.home> Subject: Re: [PATCH 7/7] vfio pci: Add vfio iommu implementation for FSL_PAMU From: Alex Williamson To: Bharat Bhushan Cc: joro@8bytes.org, benh@kernel.crashing.org, galak@kernel.crashing.org, linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org, agraf@suse.de, scottwood@freescale.com, iommu@lists.linux-foundation.org, Bharat Bhushan Date: Wed, 25 Sep 2013 13:06:41 -0600 In-Reply-To: <1379575763-2091-8-git-send-email-Bharat.Bhushan@freescale.com> References: <1379575763-2091-1-git-send-email-Bharat.Bhushan@freescale.com> <1379575763-2091-8-git-send-email-Bharat.Bhushan@freescale.com> Content-Type: text/plain; charset="UTF-8" Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35722 Lines: 1218 On Thu, 2013-09-19 at 12:59 +0530, Bharat Bhushan wrote: > This patch adds vfio iommu support for Freescale IOMMU > (PAMU - Peripheral Access Management Unit). > > The Freescale PAMU is an aperture-based IOMMU with the following > characteristics. Each device has an entry in a table in memory > describing the iova->phys mapping. The mapping has: > -an overall aperture that is power of 2 sized, and has a start iova that > is naturally aligned > -has 1 or more windows within the aperture > -number of windows must be power of 2, max is 256 > -size of each window is determined by aperture size / # of windows > -iova of each window is determined by aperture start iova / # of windows > -the mapped region in each window can be different than > the window size...mapping must power of 2 > -physical address of the mapping must be naturally aligned > with the mapping size > > Some of the code is derived from TYPE1 iommu (driver/vfio/vfio_iommu_type1.c). > > Signed-off-by: Bharat Bhushan > --- > drivers/vfio/Kconfig | 6 + > drivers/vfio/Makefile | 1 + > drivers/vfio/vfio_iommu_fsl_pamu.c | 952 ++++++++++++++++++++++++++++++++++++ > include/uapi/linux/vfio.h | 100 ++++ > 4 files changed, 1059 insertions(+), 0 deletions(-) > create mode 100644 drivers/vfio/vfio_iommu_fsl_pamu.c > > diff --git a/drivers/vfio/Kconfig b/drivers/vfio/Kconfig > index 26b3d9d..7d1da26 100644 > --- a/drivers/vfio/Kconfig > +++ b/drivers/vfio/Kconfig > @@ -8,11 +8,17 @@ config VFIO_IOMMU_SPAPR_TCE > depends on VFIO && SPAPR_TCE_IOMMU > default n > > +config VFIO_IOMMU_FSL_PAMU > + tristate > + depends on VFIO > + default n > + > menuconfig VFIO > tristate "VFIO Non-Privileged userspace driver framework" > depends on IOMMU_API > select VFIO_IOMMU_TYPE1 if X86 > select VFIO_IOMMU_SPAPR_TCE if (PPC_POWERNV || PPC_PSERIES) > + select VFIO_IOMMU_FSL_PAMU if FSL_PAMU > help > VFIO provides a framework for secure userspace device drivers. > See Documentation/vfio.txt for more details. > diff --git a/drivers/vfio/Makefile b/drivers/vfio/Makefile > index c5792ec..7461350 100644 > --- a/drivers/vfio/Makefile > +++ b/drivers/vfio/Makefile > @@ -1,4 +1,5 @@ > obj-$(CONFIG_VFIO) += vfio.o > obj-$(CONFIG_VFIO_IOMMU_TYPE1) += vfio_iommu_common.o vfio_iommu_type1.o > obj-$(CONFIG_VFIO_IOMMU_SPAPR_TCE) += vfio_iommu_common.o vfio_iommu_spapr_tce.o > +obj-$(CONFIG_VFIO_IOMMU_FSL_PAMU) += vfio_iommu_common.o vfio_iommu_fsl_pamu.o > obj-$(CONFIG_VFIO_PCI) += pci/ > diff --git a/drivers/vfio/vfio_iommu_fsl_pamu.c b/drivers/vfio/vfio_iommu_fsl_pamu.c > new file mode 100644 > index 0000000..b29365f > --- /dev/null > +++ b/drivers/vfio/vfio_iommu_fsl_pamu.c > @@ -0,0 +1,952 @@ > +/* > + * VFIO: IOMMU DMA mapping support for FSL PAMU IOMMU > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License, version 2, as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. > + * > + * Copyright (C) 2013 Freescale Semiconductor, Inc. > + * > + * Author: Bharat Bhushan > + * > + * This file is derived from driver/vfio/vfio_iommu_type1.c > + * > + * The Freescale PAMU is an aperture-based IOMMU with the following > + * characteristics. Each device has an entry in a table in memory > + * describing the iova->phys mapping. The mapping has: > + * -an overall aperture that is power of 2 sized, and has a start iova that > + * is naturally aligned > + * -has 1 or more windows within the aperture > + * -number of windows must be power of 2, max is 256 > + * -size of each window is determined by aperture size / # of windows > + * -iova of each window is determined by aperture start iova / # of windows > + * -the mapped region in each window can be different than > + * the window size...mapping must power of 2 > + * -physical address of the mapping must be naturally aligned > + * with the mapping size > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include /* pci_bus_type */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "vfio_iommu_common.h" > + > +#define DRIVER_VERSION "0.1" > +#define DRIVER_AUTHOR "Bharat Bhushan " > +#define DRIVER_DESC "FSL PAMU IOMMU driver for VFIO" > + > +struct vfio_iommu { > + struct iommu_domain *domain; > + struct mutex lock; > + dma_addr_t aperture_start; > + dma_addr_t aperture_end; > + dma_addr_t page_size; /* Maximum mapped Page size */ > + int nsubwindows; /* Number of subwindows */ > + struct rb_root dma_list; > + struct list_head msi_dma_list; > + struct list_head group_list; > +}; > + > +struct vfio_dma { > + struct rb_node node; > + dma_addr_t iova; /* Device address */ > + unsigned long vaddr; /* Process virtual addr */ > + size_t size; /* Number of pages */ Is this really pages? > + int prot; /* IOMMU_READ/WRITE */ > +}; > + > +struct vfio_msi_dma { > + struct list_head next; > + dma_addr_t iova; /* Device address */ > + int bank_id; > + int prot; /* IOMMU_READ/WRITE */ > +}; > + > +struct vfio_group { > + struct iommu_group *iommu_group; > + struct list_head next; > +}; > + > +static struct vfio_dma *vfio_find_dma(struct vfio_iommu *iommu, > + dma_addr_t start, size_t size) > +{ > + struct rb_node *node = iommu->dma_list.rb_node; > + > + while (node) { > + struct vfio_dma *dma = rb_entry(node, struct vfio_dma, node); > + > + if (start + size <= dma->iova) > + node = node->rb_left; > + else if (start >= dma->iova + dma->size) because this looks more like it's bytes... > + node = node->rb_right; > + else > + return dma; > + } > + > + return NULL; > +} > + > +static void vfio_insert_dma(struct vfio_iommu *iommu, struct vfio_dma *new) > +{ > + struct rb_node **link = &iommu->dma_list.rb_node, *parent = NULL; > + struct vfio_dma *dma; > + > + while (*link) { > + parent = *link; > + dma = rb_entry(parent, struct vfio_dma, node); > + > + if (new->iova + new->size <= dma->iova) so does this... > + link = &(*link)->rb_left; > + else > + link = &(*link)->rb_right; > + } > + > + rb_link_node(&new->node, parent, link); > + rb_insert_color(&new->node, &iommu->dma_list); > +} > + > +static void vfio_remove_dma(struct vfio_iommu *iommu, struct vfio_dma *old) > +{ > + rb_erase(&old->node, &iommu->dma_list); > +} So if your vfio_dma.size is actually in bytes, why isn't all this code in common? > + > +static int iova_to_win(struct vfio_iommu *iommu, dma_addr_t iova) > +{ > + u64 offset = iova - iommu->aperture_start; > + do_div(offset, iommu->page_size); > + return (int) offset; > +} > + > +static int vfio_disable_iommu_domain(struct vfio_iommu *iommu) > +{ > + int enable = 0; > + return iommu_domain_set_attr(iommu->domain, > + DOMAIN_ATTR_FSL_PAMU_ENABLE, &enable); > +} This is never called?! > + > +static int vfio_enable_iommu_domain(struct vfio_iommu *iommu) > +{ > + int enable = 1; > + return iommu_domain_set_attr(iommu->domain, > + DOMAIN_ATTR_FSL_PAMU_ENABLE, &enable); > +} > + > +/* Unmap DMA region */ > +static int vfio_unmap_unpin(struct vfio_iommu *iommu, struct vfio_dma *dma, > + dma_addr_t iova, size_t *size) > +{ > + dma_addr_t start = iova; > + int win, win_start, win_end; > + long unlocked = 0; > + unsigned int nr_pages; > + > + nr_pages = iommu->page_size / PAGE_SIZE; > + win_start = iova_to_win(iommu, iova); > + win_end = iova_to_win(iommu, iova + *size - 1); > + > + /* Release the pinned pages */ > + for (win = win_start; win <= win_end; iova += iommu->page_size, win++) { > + unsigned long pfn; > + > + pfn = iommu_iova_to_phys(iommu->domain, iova) >> PAGE_SHIFT; > + if (!pfn) > + continue; > + > + iommu_domain_window_disable(iommu->domain, win); > + > + unlocked += vfio_unpin_pages(pfn, nr_pages, dma->prot, 1); > + } > + > + vfio_lock_acct(-unlocked); > + *size = iova - start; > + return 0; > +} > + > +static int vfio_remove_dma_overlap(struct vfio_iommu *iommu, dma_addr_t start, > + size_t *size, struct vfio_dma *dma) > +{ > + size_t offset, overlap, tmp; > + struct vfio_dma *split; > + int ret; > + > + if (!*size) > + return 0; > + > + /* > + * Existing dma region is completely covered, unmap all. This is > + * the likely case since userspace tends to map and unmap buffers > + * in one shot rather than multiple mappings within a buffer. > + */ > + if (likely(start <= dma->iova && > + start + *size >= dma->iova + dma->size)) { > + *size = dma->size; > + ret = vfio_unmap_unpin(iommu, dma, dma->iova, size); > + if (ret) > + return ret; > + > + /* > + * Did we remove more than we have? Should never happen > + * since a vfio_dma is contiguous in iova and vaddr. > + */ > + WARN_ON(*size != dma->size); > + > + vfio_remove_dma(iommu, dma); > + kfree(dma); > + return 0; > + } > + > + /* Overlap low address of existing range */ > + if (start <= dma->iova) { > + overlap = start + *size - dma->iova; > + ret = vfio_unmap_unpin(iommu, dma, dma->iova, &overlap); > + if (ret) > + return ret; > + > + vfio_remove_dma(iommu, dma); > + > + /* > + * Check, we may have removed to whole vfio_dma. If not > + * fixup and re-insert. > + */ > + if (overlap < dma->size) { > + dma->iova += overlap; > + dma->vaddr += overlap; > + dma->size -= overlap; > + vfio_insert_dma(iommu, dma); > + } else > + kfree(dma); > + > + *size = overlap; > + return 0; > + } > + > + /* Overlap high address of existing range */ > + if (start + *size >= dma->iova + dma->size) { > + offset = start - dma->iova; > + overlap = dma->size - offset; > + > + ret = vfio_unmap_unpin(iommu, dma, start, &overlap); > + if (ret) > + return ret; > + > + dma->size -= overlap; > + *size = overlap; > + return 0; > + } > + > + /* Split existing */ > + > + /* > + * Allocate our tracking structure early even though it may not > + * be used. An Allocation failure later loses track of pages and > + * is more difficult to unwind. > + */ > + split = kzalloc(sizeof(*split), GFP_KERNEL); > + if (!split) > + return -ENOMEM; > + > + offset = start - dma->iova; > + > + ret = vfio_unmap_unpin(iommu, dma, start, size); > + if (ret || !*size) { > + kfree(split); > + return ret; > + } > + > + tmp = dma->size; > + > + /* Resize the lower vfio_dma in place, before the below insert */ > + dma->size = offset; > + > + /* Insert new for remainder, assuming it didn't all get unmapped */ > + if (likely(offset + *size < tmp)) { > + split->size = tmp - offset - *size; > + split->iova = dma->iova + offset + *size; > + split->vaddr = dma->vaddr + offset + *size; > + split->prot = dma->prot; > + vfio_insert_dma(iommu, split); > + } else > + kfree(split); > + > + return 0; > +} Hmm, this looks identical to type1, can we share more? > + > +/* Map DMA region */ > +static int vfio_dma_map(struct vfio_iommu *iommu, dma_addr_t iova, > + unsigned long vaddr, long npage, int prot) > +{ > + int ret = 0, i; > + size_t size; > + unsigned int win, nr_subwindows; > + dma_addr_t iovamap; > + > + /* total size to be mapped */ > + size = npage << PAGE_SHIFT; > + do_div(size, iommu->page_size); > + nr_subwindows = size; > + size = npage << PAGE_SHIFT; Is all this do_div() stuff necessary? If page_size is a power of two, just shift it. > + iovamap = iova; > + for (i = 0; i < nr_subwindows; i++) { > + unsigned long pfn; > + unsigned long nr_pages; > + dma_addr_t mapsize; > + struct vfio_dma *dma = NULL; > + > + win = iova_to_win(iommu, iovamap); Aren't these consecutive, why can't we just increment? > + if (iovamap != iommu->aperture_start + iommu->page_size * win) { > + pr_err("%s iova(%llx) unalligned to window size %llx\n", > + __func__, iovamap, iommu->page_size); > + ret = -EINVAL; > + break; > + } Can't this only happen on the first one? Seems like it should be outside of the loop. What about alignment with the end of the window, do you care? Check spelling in your warning, but better yet, get rid of it, this doesn't seem like something we need to error on. > + > + mapsize = min(iova + size - iovamap, iommu->page_size); > + /* > + * FIXME: Currently we only support mapping page-size > + * of subwindow-size. > + */ > + if (mapsize < iommu->page_size) { > + pr_err("%s iova (%llx) not alligned to window size %llx\n", > + __func__, iovamap, iommu->page_size); > + ret = -EINVAL; > + break; > + } So you do care about the end alignment, but why can't we error for both of these in advance? > + > + nr_pages = mapsize >> PAGE_SHIFT; > + > + /* Pin a contiguous chunk of memory */ > + ret = vfio_pin_pages(vaddr, nr_pages, prot, &pfn); > + if (ret != nr_pages) { > + pr_err("%s unable to pin pages = %lx, pinned(%lx/%lx)\n", > + __func__, vaddr, npage, nr_pages); > + ret = -EINVAL; > + break; > + } How likely is this to succeed? It seems like we're relying on userspace to use hugepages to make this work. > + > + ret = iommu_domain_window_enable(iommu->domain, win, > + (phys_addr_t)pfn << PAGE_SHIFT, > + mapsize, prot); > + if (ret) { > + pr_err("%s unable to iommu_map()\n", __func__); > + ret = -EINVAL; > + break; > + } You might consider how many cases you're returning EINVAL and think about how difficult this will be to debug. I don't think we can leave all these pr_err()s since it gives userspace a trivial way to spam log files. > + > + /* > + * Check if we abut a region below - nothing below 0. > + * This is the most likely case when mapping chunks of > + * physically contiguous regions within a virtual address > + * range. Update the abutting entry in place since iova > + * doesn't change. > + */ > + if (likely(iovamap)) { > + struct vfio_dma *tmp; > + tmp = vfio_find_dma(iommu, iovamap - 1, 1); > + if (tmp && tmp->prot == prot && > + tmp->vaddr + tmp->size == vaddr) { > + tmp->size += mapsize; > + dma = tmp; > + } > + } > + > + /* > + * Check if we abut a region above - nothing above ~0 + 1. > + * If we abut above and below, remove and free. If only > + * abut above, remove, modify, reinsert. > + */ > + if (likely(iovamap + mapsize)) { > + struct vfio_dma *tmp; > + tmp = vfio_find_dma(iommu, iovamap + mapsize, 1); > + if (tmp && tmp->prot == prot && > + tmp->vaddr == vaddr + mapsize) { > + vfio_remove_dma(iommu, tmp); > + if (dma) { > + dma->size += tmp->size; > + kfree(tmp); > + } else { > + tmp->size += mapsize; > + tmp->iova = iovamap; > + tmp->vaddr = vaddr; > + vfio_insert_dma(iommu, tmp); > + dma = tmp; > + } > + } > + } > + > + if (!dma) { > + dma = kzalloc(sizeof(*dma), GFP_KERNEL); > + if (!dma) { > + iommu_unmap(iommu->domain, iovamap, mapsize); > + vfio_unpin_pages(pfn, npage, prot, true); > + ret = -ENOMEM; > + break; > + } > + > + dma->size = mapsize; > + dma->iova = iovamap; > + dma->vaddr = vaddr; > + dma->prot = prot; > + vfio_insert_dma(iommu, dma); > + } > + > + iovamap += mapsize; > + vaddr += mapsize; Another chunk that looks like it's probably identical to type1. Can we rip this out to another function and add it to common? > + } > + > + if (ret) { > + struct vfio_dma *tmp; > + while ((tmp = vfio_find_dma(iommu, iova, size))) { > + int r = vfio_remove_dma_overlap(iommu, iova, > + &size, tmp); > + if (WARN_ON(r || !size)) > + break; > + } > + } Broken whitespace, please run scripts/checkpatch.pl before posting. > + > + vfio_enable_iommu_domain(iommu); I don't quite understand your semantics here since you never use the disable version, is this just redundant after the first mapping? When dma_list is empty should it be disabled? Is there a bug here that an error will enable the iommu domain even if there are no entries? > + return 0; > +} > + > +static int vfio_dma_do_map(struct vfio_iommu *iommu, > + struct vfio_iommu_type1_dma_map *map) > +{ > + dma_addr_t iova = map->iova; > + size_t size = map->size; > + unsigned long vaddr = map->vaddr; > + int ret = 0, prot = 0; > + long npage; > + > + /* READ/WRITE from device perspective */ > + if (map->flags & VFIO_DMA_MAP_FLAG_WRITE) > + prot |= IOMMU_WRITE; > + if (map->flags & VFIO_DMA_MAP_FLAG_READ) > + prot |= IOMMU_READ; > + > + if (!prot) > + return -EINVAL; /* No READ/WRITE? */ > + > + /* Don't allow IOVA wrap */ > + if (iova + size && iova + size < iova) > + return -EINVAL; > + > + /* Don't allow virtual address wrap */ > + if (vaddr + size && vaddr + size < vaddr) > + return -EINVAL; > + > + /* > + * FIXME: Currently we only support mapping page-size > + * of subwindow-size. > + */ > + if (size < iommu->page_size) > + return -EINVAL; > + I'd think the start and end alignment could be tested here. > + npage = size >> PAGE_SHIFT; > + if (!npage) > + return -EINVAL; > + > + mutex_lock(&iommu->lock); > + > + if (vfio_find_dma(iommu, iova, size)) { > + ret = -EEXIST; > + goto out_lock; > + } > + > + vfio_dma_map(iommu, iova, vaddr, npage, prot); > + > +out_lock: > + mutex_unlock(&iommu->lock); > + return ret; > +} > + > +static int vfio_dma_do_unmap(struct vfio_iommu *iommu, > + struct vfio_iommu_type1_dma_unmap *unmap) > +{ > + struct vfio_dma *dma; > + size_t unmapped = 0, size; > + int ret = 0; > + > + mutex_lock(&iommu->lock); > + > + while ((dma = vfio_find_dma(iommu, unmap->iova, unmap->size))) { > + size = unmap->size; > + ret = vfio_remove_dma_overlap(iommu, unmap->iova, &size, dma); > + if (ret || !size) > + break; > + unmapped += size; > + } > + > + mutex_unlock(&iommu->lock); > + > + /* > + * We may unmap more than requested, update the unmap struct so > + * userspace can know. > + */ > + unmap->size = unmapped; > + > + return ret; > +} > + > +static int vfio_handle_get_attr(struct vfio_iommu *iommu, > + struct vfio_pamu_attr *pamu_attr) > +{ > + switch (pamu_attr->attribute) { > + case VFIO_ATTR_GEOMETRY: { > + struct iommu_domain_geometry geom; > + if (iommu_domain_get_attr(iommu->domain, > + DOMAIN_ATTR_GEOMETRY, &geom)) { > + pr_err("%s Error getting domain geometry\n", > + __func__); > + return -EFAULT; > + } > + > + pamu_attr->attr_info.attr.aperture_start = geom.aperture_start; > + pamu_attr->attr_info.attr.aperture_end = geom.aperture_end; > + break; > + } > + case VFIO_ATTR_WINDOWS: { > + u32 count; > + if (iommu_domain_get_attr(iommu->domain, > + DOMAIN_ATTR_WINDOWS, &count)) { > + pr_err("%s Error getting domain windows\n", > + __func__); > + return -EFAULT; > + } > + > + pamu_attr->attr_info.windows = count; > + break; > + } > + case VFIO_ATTR_PAMU_STASH: { > + struct pamu_stash_attribute stash; > + if (iommu_domain_get_attr(iommu->domain, > + DOMAIN_ATTR_FSL_PAMU_STASH, &stash)) { > + pr_err("%s Error getting domain windows\n", > + __func__); > + return -EFAULT; > + } > + > + pamu_attr->attr_info.stash.cpu = stash.cpu; > + pamu_attr->attr_info.stash.cache = stash.cache; > + break; > + } > + > + default: > + pr_err("%s Error: Invalid attribute (%d)\n", > + __func__, pamu_attr->attribute); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int vfio_handle_set_attr(struct vfio_iommu *iommu, > + struct vfio_pamu_attr *pamu_attr) > +{ > + switch (pamu_attr->attribute) { > + case VFIO_ATTR_GEOMETRY: { > + struct iommu_domain_geometry geom; > + > + geom.aperture_start = pamu_attr->attr_info.attr.aperture_start; > + geom.aperture_end = pamu_attr->attr_info.attr.aperture_end; > + iommu->aperture_start = geom.aperture_start; > + iommu->aperture_end = geom.aperture_end; > + geom.force_aperture = 1; > + if (iommu_domain_set_attr(iommu->domain, > + DOMAIN_ATTR_GEOMETRY, &geom)) { > + pr_err("%s Error setting domain geometry\n", __func__); > + return -EFAULT; > + } > + > + break; > + } > + case VFIO_ATTR_WINDOWS: { > + u32 count = pamu_attr->attr_info.windows; > + u64 size; > + if (count > 256) { > + pr_err("Number of subwindows requested (%d) is 256\n", > + count); > + return -EINVAL; > + } > + iommu->nsubwindows = pamu_attr->attr_info.windows; > + size = iommu->aperture_end - iommu->aperture_start + 1; > + do_div(size, count); > + iommu->page_size = size; > + if (iommu_domain_set_attr(iommu->domain, > + DOMAIN_ATTR_WINDOWS, &count)) { > + pr_err("%s Error getting domain windows\n", > + __func__); > + return -EFAULT; > + } > + > + break; > + } > + case VFIO_ATTR_PAMU_STASH: { > + struct pamu_stash_attribute stash; > + > + stash.cpu = pamu_attr->attr_info.stash.cpu; > + stash.cache = pamu_attr->attr_info.stash.cache; > + if (iommu_domain_set_attr(iommu->domain, > + DOMAIN_ATTR_FSL_PAMU_STASH, &stash)) { > + pr_err("%s Error getting domain windows\n", > + __func__); > + return -EFAULT; > + } > + break; Why do we throw away the return value of iommu_domain_set_attr and replace it with EFAULT in all these cases? I assume all these pr_err()s are leftover debug. Can the user do anything they shouldn't through these? How do we guarantee that? > + } > + > + default: > + pr_err("%s Error: Invalid attribute (%d)\n", > + __func__, pamu_attr->attribute); > + return -EINVAL; > + } > + > + return 0; > +} > + > +static int vfio_msi_map(struct vfio_iommu *iommu, > + struct vfio_pamu_msi_bank_map *msi_map, int prot) > +{ > + struct msi_region region; > + int window; > + int ret; > + > + ret = msi_get_region(msi_map->msi_bank_index, ®ion); > + if (ret) { > + pr_err("%s MSI region (%d) not found\n", __func__, > + msi_map->msi_bank_index); > + return ret; > + } > + > + window = iova_to_win(iommu, msi_map->iova); > + ret = iommu_domain_window_enable(iommu->domain, window, region.addr, > + region.size, prot); > + if (ret) { > + pr_err("%s Error: unable to map msi region\n", __func__); > + return ret; > + } > + > + return 0; > +} > + > +static int vfio_do_msi_map(struct vfio_iommu *iommu, > + struct vfio_pamu_msi_bank_map *msi_map) > +{ > + struct vfio_msi_dma *msi_dma; > + int ret, prot = 0; > + > + /* READ/WRITE from device perspective */ > + if (msi_map->flags & VFIO_DMA_MAP_FLAG_WRITE) > + prot |= IOMMU_WRITE; > + if (msi_map->flags & VFIO_DMA_MAP_FLAG_READ) > + prot |= IOMMU_READ; > + > + if (!prot) > + return -EINVAL; /* No READ/WRITE? */ > + > + ret = vfio_msi_map(iommu, msi_map, prot); > + if (ret) > + return ret; > + > + msi_dma = kzalloc(sizeof(*msi_dma), GFP_KERNEL); > + if (!msi_dma) > + return -ENOMEM; > + > + msi_dma->iova = msi_map->iova; > + msi_dma->bank_id = msi_map->msi_bank_index; > + list_add(&msi_dma->next, &iommu->msi_dma_list); > + return 0; What happens when the user creates multiple MSI mappings at the same iova? What happens when DMA mappings overlap MSI mappings? Shouldn't there be some locking around list manipulation? > +} > + > +static void vfio_msi_unmap(struct vfio_iommu *iommu, dma_addr_t iova) > +{ > + int window; > + window = iova_to_win(iommu, iova); > + iommu_domain_window_disable(iommu->domain, window); > +} > + > +static int vfio_do_msi_unmap(struct vfio_iommu *iommu, > + struct vfio_pamu_msi_bank_unmap *msi_unmap) > +{ > + struct vfio_msi_dma *mdma, *mdma_tmp; > + > + list_for_each_entry_safe(mdma, mdma_tmp, &iommu->msi_dma_list, next) { > + if (mdma->iova == msi_unmap->iova) { > + vfio_msi_unmap(iommu, mdma->iova); > + list_del(&mdma->next); > + kfree(mdma); > + return 0; > + } > + } > + > + return -EINVAL; > +} > +static void *vfio_iommu_fsl_pamu_open(unsigned long arg) > +{ > + struct vfio_iommu *iommu; > + > + if (arg != VFIO_FSL_PAMU_IOMMU) > + return ERR_PTR(-EINVAL); > + > + iommu = kzalloc(sizeof(*iommu), GFP_KERNEL); > + if (!iommu) > + return ERR_PTR(-ENOMEM); > + > + INIT_LIST_HEAD(&iommu->group_list); > + iommu->dma_list = RB_ROOT; > + INIT_LIST_HEAD(&iommu->msi_dma_list); > + mutex_init(&iommu->lock); > + > + /* > + * Wish we didn't have to know about bus_type here. > + */ > + iommu->domain = iommu_domain_alloc(&pci_bus_type); > + if (!iommu->domain) { > + kfree(iommu); > + return ERR_PTR(-EIO); > + } > + > + return iommu; > +} > + > +static void vfio_iommu_fsl_pamu_release(void *iommu_data) > +{ > + struct vfio_iommu *iommu = iommu_data; > + struct vfio_group *group, *group_tmp; > + struct vfio_msi_dma *mdma, *mdma_tmp; > + struct rb_node *node; > + > + list_for_each_entry_safe(group, group_tmp, &iommu->group_list, next) { > + iommu_detach_group(iommu->domain, group->iommu_group); > + list_del(&group->next); > + kfree(group); > + } > + > + while ((node = rb_first(&iommu->dma_list))) { > + struct vfio_dma *dma = rb_entry(node, struct vfio_dma, node); > + size_t size = dma->size; > + vfio_remove_dma_overlap(iommu, dma->iova, &size, dma); > + if (WARN_ON(!size)) > + break; > + } > + > + list_for_each_entry_safe(mdma, mdma_tmp, &iommu->msi_dma_list, next) { > + vfio_msi_unmap(iommu, mdma->iova); > + list_del(&mdma->next); > + kfree(mdma); > + } > + > + iommu_domain_free(iommu->domain); > + iommu->domain = NULL; > + kfree(iommu); > +} > + > +static long vfio_iommu_fsl_pamu_ioctl(void *iommu_data, > + unsigned int cmd, unsigned long arg) > +{ > + struct vfio_iommu *iommu = iommu_data; > + unsigned long minsz; > + > + if (cmd == VFIO_CHECK_EXTENSION) { > + switch (arg) { > + case VFIO_FSL_PAMU_IOMMU: > + return 1; > + default: > + return 0; > + } > + } else if (cmd == VFIO_IOMMU_MAP_DMA) { > + struct vfio_iommu_type1_dma_map map; > + uint32_t mask = VFIO_DMA_MAP_FLAG_READ | > + VFIO_DMA_MAP_FLAG_WRITE; > + > + minsz = offsetofend(struct vfio_iommu_type1_dma_map, size); > + > + if (copy_from_user(&map, (void __user *)arg, minsz)) > + return -EFAULT; > + > + if (map.argsz < minsz || map.flags & ~mask) > + return -EINVAL; > + > + return vfio_dma_do_map(iommu, &map); > + > + } else if (cmd == VFIO_IOMMU_UNMAP_DMA) { > + struct vfio_iommu_type1_dma_unmap unmap; > + long ret; > + > + minsz = offsetofend(struct vfio_iommu_type1_dma_unmap, size); > + > + if (copy_from_user(&unmap, (void __user *)arg, minsz)) > + return -EFAULT; > + > + if (unmap.argsz < minsz || unmap.flags) > + return -EINVAL; > + > + ret = vfio_dma_do_unmap(iommu, &unmap); > + if (ret) > + return ret; > + > + return copy_to_user((void __user *)arg, &unmap, minsz); > + } else if (cmd == VFIO_IOMMU_PAMU_GET_ATTR) { > + struct vfio_pamu_attr pamu_attr; > + > + minsz = offsetofend(struct vfio_pamu_attr, attr_info); > + if (copy_from_user(&pamu_attr, (void __user *)arg, minsz)) > + return -EFAULT; > + > + if (pamu_attr.argsz < minsz) > + return -EINVAL; > + > + vfio_handle_get_attr(iommu, &pamu_attr); > + > + copy_to_user((void __user *)arg, &pamu_attr, minsz); > + return 0; > + } else if (cmd == VFIO_IOMMU_PAMU_SET_ATTR) { > + struct vfio_pamu_attr pamu_attr; > + > + minsz = offsetofend(struct vfio_pamu_attr, attr_info); > + if (copy_from_user(&pamu_attr, (void __user *)arg, minsz)) > + return -EFAULT; > + > + if (pamu_attr.argsz < minsz) > + return -EINVAL; > + > + vfio_handle_set_attr(iommu, &pamu_attr); > + return 0; > + } else if (cmd == VFIO_IOMMU_PAMU_GET_MSI_BANK_COUNT) { > + return msi_get_region_count(); > + } else if (cmd == VFIO_IOMMU_PAMU_MAP_MSI_BANK) { > + struct vfio_pamu_msi_bank_map msi_map; > + > + minsz = offsetofend(struct vfio_pamu_msi_bank_map, iova); > + if (copy_from_user(&msi_map, (void __user *)arg, minsz)) > + return -EFAULT; > + > + if (msi_map.argsz < minsz) > + return -EINVAL; > + > + vfio_do_msi_map(iommu, &msi_map); > + return 0; > + } else if (cmd == VFIO_IOMMU_PAMU_UNMAP_MSI_BANK) { > + struct vfio_pamu_msi_bank_unmap msi_unmap; > + > + minsz = offsetofend(struct vfio_pamu_msi_bank_unmap, iova); > + if (copy_from_user(&msi_unmap, (void __user *)arg, minsz)) > + return -EFAULT; > + > + if (msi_unmap.argsz < minsz) > + return -EINVAL; > + > + vfio_do_msi_unmap(iommu, &msi_unmap); > + return 0; > + > + } > + > + return -ENOTTY; > +} > + > +static int vfio_iommu_fsl_pamu_attach_group(void *iommu_data, > + struct iommu_group *iommu_group) > +{ > + struct vfio_iommu *iommu = iommu_data; > + struct vfio_group *group, *tmp; > + int ret; > + > + group = kzalloc(sizeof(*group), GFP_KERNEL); > + if (!group) > + return -ENOMEM; > + > + mutex_lock(&iommu->lock); > + > + list_for_each_entry(tmp, &iommu->group_list, next) { > + if (tmp->iommu_group == iommu_group) { > + mutex_unlock(&iommu->lock); > + kfree(group); > + return -EINVAL; > + } > + } > + > + ret = iommu_attach_group(iommu->domain, iommu_group); > + if (ret) { > + mutex_unlock(&iommu->lock); > + kfree(group); > + return ret; > + } > + > + group->iommu_group = iommu_group; > + list_add(&group->next, &iommu->group_list); > + > + mutex_unlock(&iommu->lock); > + > + return 0; > +} > + > +static void vfio_iommu_fsl_pamu_detach_group(void *iommu_data, > + struct iommu_group *iommu_group) > +{ > + struct vfio_iommu *iommu = iommu_data; > + struct vfio_group *group; > + > + mutex_lock(&iommu->lock); > + > + list_for_each_entry(group, &iommu->group_list, next) { > + if (group->iommu_group == iommu_group) { > + iommu_detach_group(iommu->domain, iommu_group); > + list_del(&group->next); > + kfree(group); > + break; > + } > + } > + > + mutex_unlock(&iommu->lock); > +} > + > +static const struct vfio_iommu_driver_ops vfio_iommu_driver_ops_fsl_pamu = { > + .name = "vfio-iommu-fsl_pamu", > + .owner = THIS_MODULE, > + .open = vfio_iommu_fsl_pamu_open, > + .release = vfio_iommu_fsl_pamu_release, > + .ioctl = vfio_iommu_fsl_pamu_ioctl, > + .attach_group = vfio_iommu_fsl_pamu_attach_group, > + .detach_group = vfio_iommu_fsl_pamu_detach_group, > +}; > + > +static int __init vfio_iommu_fsl_pamu_init(void) > +{ > + if (!iommu_present(&pci_bus_type)) > + return -ENODEV; > + > + return vfio_register_iommu_driver(&vfio_iommu_driver_ops_fsl_pamu); > +} > + > +static void __exit vfio_iommu_fsl_pamu_cleanup(void) > +{ > + vfio_unregister_iommu_driver(&vfio_iommu_driver_ops_fsl_pamu); > +} > + > +module_init(vfio_iommu_fsl_pamu_init); > +module_exit(vfio_iommu_fsl_pamu_cleanup); > + > +MODULE_VERSION(DRIVER_VERSION); > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR(DRIVER_AUTHOR); > +MODULE_DESCRIPTION(DRIVER_DESC); > diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h > index 0fd47f5..d359055 100644 > --- a/include/uapi/linux/vfio.h > +++ b/include/uapi/linux/vfio.h > @@ -23,6 +23,7 @@ > > #define VFIO_TYPE1_IOMMU 1 > #define VFIO_SPAPR_TCE_IOMMU 2 > +#define VFIO_FSL_PAMU_IOMMU 3 > > /* > * The IOCTL interface is designed for extensibility by embedding the > @@ -451,4 +452,103 @@ struct vfio_iommu_spapr_tce_info { > > /* ***************************************************************** */ > > +/*********** APIs for VFIO_PAMU type only ****************/ > +/* > + * VFIO_IOMMU_PAMU_GET_ATTR - _IO(VFIO_TYPE, VFIO_BASE + 17, > + * struct vfio_pamu_attr) > + * > + * Gets the iommu attributes for the current vfio container. > + * Caller sets argsz and attribute. The ioctl fills in > + * the provided struct vfio_pamu_attr based on the attribute > + * value that was set. > + * Return: 0 on success, -errno on failure > + */ > +struct vfio_pamu_attr { > + __u32 argsz; > + __u32 flags; /* no flags currently */ > +#define VFIO_ATTR_GEOMETRY 0 > +#define VFIO_ATTR_WINDOWS 1 > +#define VFIO_ATTR_PAMU_STASH 2 > + __u32 attribute; > + > + union { > + /* VFIO_ATTR_GEOMETRY */ > + struct { > + /* first addr that can be mapped */ > + __u64 aperture_start; > + /* last addr that can be mapped */ > + __u64 aperture_end; > + } attr; > + > + /* VFIO_ATTR_WINDOWS */ > + __u32 windows; /* number of windows in the aperture > + * initially this will be the max number > + * of windows that can be set > + */ > + /* VFIO_ATTR_PAMU_STASH */ > + struct { > + __u32 cpu; /* CPU number for stashing */ > + __u32 cache; /* cache ID for stashing */ > + } stash; > + } attr_info; > +}; > +#define VFIO_IOMMU_PAMU_GET_ATTR _IO(VFIO_TYPE, VFIO_BASE + 17) > + > +/* > + * VFIO_IOMMU_PAMU_SET_ATTR - _IO(VFIO_TYPE, VFIO_BASE + 18, > + * struct vfio_pamu_attr) > + * > + * Sets the iommu attributes for the current vfio container. > + * Caller sets struct vfio_pamu attr, including argsz and attribute and > + * setting any fields that are valid for the attribute. > + * Return: 0 on success, -errno on failure > + */ > +#define VFIO_IOMMU_PAMU_SET_ATTR _IO(VFIO_TYPE, VFIO_BASE + 18) > + > +/* > + * VFIO_IOMMU_PAMU_GET_MSI_BANK_COUNT - _IO(VFIO_TYPE, VFIO_BASE + 19, __u32) > + * > + * Returns the number of MSI banks for this platform. This tells user space > + * how many aperture windows should be reserved for MSI banks when setting > + * the PAMU geometry and window count. > + * Return: __u32 bank count on success, -errno on failure > + */ > +#define VFIO_IOMMU_PAMU_GET_MSI_BANK_COUNT _IO(VFIO_TYPE, VFIO_BASE + 19) > + > +/* > + * VFIO_IOMMU_PAMU_MAP_MSI_BANK - _IO(VFIO_TYPE, VFIO_BASE + 20, > + * struct vfio_pamu_msi_bank_map) > + * > + * Maps the MSI bank at the specified index and iova. User space must > + * call this ioctl once for each MSI bank (count of banks is returned by > + * VFIO_IOMMU_PAMU_GET_MSI_BANK_COUNT). > + * Caller provides struct vfio_pamu_msi_bank_map with all fields set. > + * Return: 0 on success, -errno on failure > + */ > + > +struct vfio_pamu_msi_bank_map { > + __u32 argsz; > + __u32 flags; /* no flags currently */ > + __u32 msi_bank_index; /* the index of the MSI bank */ > + __u64 iova; /* the iova the bank is to be mapped to */ > +}; > +#define VFIO_IOMMU_PAMU_MAP_MSI_BANK _IO(VFIO_TYPE, VFIO_BASE + 20) > + > +/* > + * VFIO_IOMMU_PAMU_UNMAP_MSI_BANK - _IO(VFIO_TYPE, VFIO_BASE + 21, > + * struct vfio_pamu_msi_bank_unmap) > + * > + * Unmaps the MSI bank at the specified iova. > + * Caller provides struct vfio_pamu_msi_bank_unmap with all fields set. > + * Operates on VFIO file descriptor (/dev/vfio/vfio). > + * Return: 0 on success, -errno on failure > + */ > + > +struct vfio_pamu_msi_bank_unmap { > + __u32 argsz; > + __u32 flags; /* no flags currently */ > + __u64 iova; /* the iova to be unmapped to */ > +}; > +#define VFIO_IOMMU_PAMU_UNMAP_MSI_BANK _IO(VFIO_TYPE, VFIO_BASE + 21) > + > #endif /* _UAPIVFIO_H */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/