Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752765Ab3I0DPv (ORCPT ); Thu, 26 Sep 2013 23:15:51 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:42000 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752393Ab3I0DPp (ORCPT ); Thu, 26 Sep 2013 23:15:45 -0400 From: Eduardo Valentin To: , , , , , , , CC: , , , , , , Eduardo Valentin , "Rafael J. Wysocki" , Viresh Kumar , , Subject: [PATCHv4 06/18] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Date: Thu, 26 Sep 2013 23:13:13 -0400 Message-ID: <1380251605-3804-7-git-send-email-eduardo.valentin@ti.com> X-Mailer: git-send-email 1.8.2.1.342.gfa7285d In-Reply-To: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> References: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4569 Lines: 132 This patch changes the cpufreq-cpu0 driver to consider if a cpu needs cooling (with cpufreq). In case the cooling is needed, the cpu0 device tree node needs to be properly configured with cooling device properties. In case these properties are present,, the driver will load a cpufreq cooling device in the system. The cpufreq-cpu0 driver is not interested in determining how the system should be using the cooling device. The driver is responsible only of loading the cooling device. Describing how the cooling device will be used can be accomplished by setting up a thermal zone that references and is composed by the cpufreq cooling device. Cc: "Rafael J. Wysocki" Cc: Viresh Kumar Cc: Grant Likely Cc: Rob Herring Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Eduardo Valentin --- .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 7 +++++++ drivers/cpufreq/Kconfig | 2 +- drivers/cpufreq/cpufreq-cpu0.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt index 051f764..f055515 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -15,6 +15,10 @@ Optional properties: - clock-latency: Specify the possible maximum transition latency for clock, in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. +- #cooling-cells: +- cooling-min-level: +- cooling-max-level: + Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. Examples: @@ -33,6 +37,9 @@ cpus { 198000 850000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <2>; }; cpu@1 { diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 534fcb8..fc1e9a5 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -186,7 +186,7 @@ config CPU_FREQ_GOV_CONSERVATIVE config GENERIC_CPUFREQ_CPU0 tristate "Generic CPU0 cpufreq driver" - depends on HAVE_CLK && REGULATOR && PM_OPP && OF + depends on HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL select CPU_FREQ_TABLE help This adds a generic cpufreq driver for CPU0 frequency management. diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 78c49d8..fd707b8 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -13,7 +13,9 @@ #include #include +#include #include +#include #include #include #include @@ -21,6 +23,7 @@ #include #include #include +#include static unsigned int transition_latency; static unsigned int voltage_tolerance; /* in percentage */ @@ -29,6 +32,7 @@ static struct device *cpu_dev; static struct clk *cpu_clk; static struct regulator *cpu_reg; static struct cpufreq_frequency_table *freq_table; +static struct thermal_cooling_device *cdev; static int cpu0_verify_speed(struct cpufreq_policy *policy) { @@ -260,6 +264,17 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_free_table; } + /* + * For now, just loading the cooling device; + * thermal DT code takes care of matching them. + */ + if (of_find_property(np, "#cooling-cells", NULL)) { + cdev = of_cpufreq_cooling_register(np, cpu_present_mask); + if (IS_ERR(cdev)) + pr_err("running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); + } + of_node_put(np); return 0; @@ -272,6 +287,7 @@ out_put_node: static int cpu0_cpufreq_remove(struct platform_device *pdev) { + cpufreq_cooling_unregister(cdev); cpufreq_unregister_driver(&cpu0_cpufreq_driver); opp_free_cpufreq_table(cpu_dev, &freq_table); -- 1.8.2.1.342.gfa7285d -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/