Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755310Ab3I3OAZ (ORCPT ); Mon, 30 Sep 2013 10:00:25 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:55397 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754163Ab3I3OAV (ORCPT ); Mon, 30 Sep 2013 10:00:21 -0400 From: Sricharan R To: , , , , CC: , , , , , , , , , , Subject: [RFC PATCH 0/6] DRIVERS: IRQCHIP: Add support for crossbar IP Date: Mon, 30 Sep 2013 19:29:18 +0530 Message-ID: <1380549564-31045-1-git-send-email-r.sricharan@ti.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2749 Lines: 54 Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt requests lines from the subsystems are not needed at the same time, so they have to be muxed to the controllers appropriately. In such places a interrupt controllers are preceded by an IRQ CROSSBAR that provides flexibility in muxing the device interrupt requests to the controller inputs. This series models the peripheral interrupts that can be routed through the crossbar to the GIC as 'routable-irqs'. The routable irqs are added in a separate linear domain inside the GIC. The registered routable domain's callback are invoked as a part of the GIC's callback, which in turn should allocate a free irq line and configure the IP accordingly. So every peripheral in the dts files mentions the fixed crossbar number as its interrupt. A free gic line for that gets allocated and configured when the peripheral's interrupt is mapped. The minimal crossbar driver to track and allocate free GIC lines and configure the crossbar is added here, along with the DT bindings. Sricharan R (6): DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP ARM: DTS: DRA: Add crossbar device binding ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs. ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number ARM: DRA: Enable Crossbar IP support for DRA7XX Documentation/devicetree/bindings/arm/gic.txt | 5 + .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++ arch/arm/boot/dts/dra7.dtsi | 98 +++++----- arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/omap-wakeupgen.c | 4 +- arch/arm/mach-omap2/omap4-common.c | 4 + drivers/irqchip/Kconfig | 8 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-crossbar.c | 195 ++++++++++++++++++++ drivers/irqchip/irq-gic.c | 57 +++++- include/linux/irqchip/arm-gic.h | 8 +- include/linux/irqchip/irq-crossbar.h | 11 ++ 12 files changed, 363 insertions(+), 56 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt create mode 100644 drivers/irqchip/irq-crossbar.c create mode 100644 include/linux/irqchip/irq-crossbar.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/