Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755940Ab3JHQC4 (ORCPT ); Tue, 8 Oct 2013 12:02:56 -0400 Received: from eusmtp01.atmel.com ([212.144.249.242]:60683 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754832Ab3JHQCy (ORCPT ); Tue, 8 Oct 2013 12:02:54 -0400 Message-ID: <52542CA9.2000105@atmel.com> Date: Tue, 8 Oct 2013 18:02:49 +0200 From: Nicolas Ferre Organization: atmel User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: Boris BREZILLON , Grant Likely , Rob Herring , Rob Landley , Andrew Victor , "Jean-Christophe Plagniol-Villard" , Russell King , Mike Turquette , "Felipe Balbi" , Greg Kroah-Hartman , Ludovic Desroches , Josh Wu , Richard Genoud CC: , , Subject: Re: [PATCH v3 13/19] clk: at91: add PMC programmable clocks References: <1375937608-3773-1-git-send-email-b.brezillon@overkiz.com> <1375945938-9614-1-git-send-email-b.brezillon@overkiz.com> In-Reply-To: <1375945938-9614-1-git-send-email-b.brezillon@overkiz.com> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14464 Lines: 553 On 08/08/2013 09:12, Boris BREZILLON : > This patch adds new at91 programmable clocks implementation using common clk > framework. > A programmable clock is a clock which can be exported on a given pin to clock > external devices. > Each programmable clock is given an id (from 0 to 8). > The number of available programmable clocks depends on the SoC you're using. > Programmable clock driver only implements the clock setting (clock rate and > parent setting). It must be chained to a system clock in order to > enable/disable the generated clock. > The PCKX pins used to output the clock signals must be assigned to the > appropriate peripheral (see atmel's datasheets). > > Signed-off-by: Boris BREZILLON > --- > drivers/clk/at91/Makefile | 2 + > drivers/clk/at91/clk-programmable.c | 419 +++++++++++++++++++++++++++++++++++ > drivers/clk/at91/pmc.c | 15 ++ > drivers/clk/at91/pmc.h | 9 + > 4 files changed, 445 insertions(+) > create mode 100644 drivers/clk/at91/clk-programmable.c > > diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile > index 04deba3..3873b62 100644 > --- a/drivers/clk/at91/Makefile > +++ b/drivers/clk/at91/Makefile > @@ -5,3 +5,5 @@ > obj-y += pmc.o > obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o > obj-y += clk-system.o clk-peripheral.o > + > +obj-$(CONFIG_AT91_PROGRAMMABLE_CLOCKS) += clk-programmable.o > diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c > new file mode 100644 > index 0000000..f40de6a > --- /dev/null > +++ b/drivers/clk/at91/clk-programmable.c > @@ -0,0 +1,419 @@ > +/* > + * drivers/clk/at91/clk-programmable.c > + * > + * Copyright (C) 2013 Boris BREZILLON > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "pmc.h" > + > +#define PROG_SOURCE_MAX 5 > +#define PROG_MAX 8 > + > +struct clk_programmable_layout { > + u8 pres_shift; > + u8 css_mask; > + u8 have_slck_mck; > +}; > + > +#define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw) > +struct clk_programmable { > + struct clk_hw hw; > + struct at91_pmc *pmc; > + unsigned int irq; > + wait_queue_head_t wait; > + u8 id; > + u8 css; > + u8 pres; > + u8 slckmck; > + const struct clk_programmable_layout *layout; > +}; > + > +static irqreturn_t clk_programmable_irq_handler(int irq, void *dev_id) > +{ > + struct clk_programmable *prog = (struct clk_programmable *)dev_id; > + > + wake_up(&prog->wait); > + > + return IRQ_HANDLED; > +} > + > +static int clk_programmable_prepare(struct clk_hw *hw) > +{ > + u32 tmp; > + struct clk_programmable *prog = to_clk_programmable(hw); > + struct at91_pmc *pmc = prog->pmc; > + const struct clk_programmable_layout *layout = prog->layout; > + > + tmp = prog->css | (prog->pres << layout->pres_shift); > + if (layout->have_slck_mck && prog->slckmck) > + tmp |= 1 << 8; ;-) => define constants > + > + pmc_write(pmc, AT91_PMC_PCKR(prog->id), tmp); > + > + while (!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8)))) - create a macro - is creating an event for each iteration of the while loop a good idea? - for the while() loop, I would like a timeout and a a non-active wait function... > + wait_event(prog->wait, > + pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8))); > + > + return 0; > +} > + > +static int clk_programmable_is_ready(struct clk_hw *hw) > +{ > + struct clk_programmable *prog = to_clk_programmable(hw); > + struct at91_pmc *pmc = prog->pmc; > + > + return !!(pmc_read(pmc, AT91_PMC_SR) & (1 << (prog->id + 8))); Ditto > +} > + > +static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + u32 tmp; > + struct clk_programmable *prog = to_clk_programmable(hw); > + struct at91_pmc *pmc = prog->pmc; > + const struct clk_programmable_layout *layout = prog->layout; > + > + tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id)); > + prog->pres = (tmp >> layout->pres_shift) & 0x7; define constants > + > + return parent_rate >> prog->pres; > +} > + > +static long clk_programmable_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *parent_rate) > +{ > + unsigned long best_rate = *parent_rate; > + unsigned long best_diff; > + unsigned long new_diff; > + unsigned long cur_rate; > + int shift = shift; > + > + if (rate > *parent_rate) > + return *parent_rate; > + else > + best_diff = *parent_rate - rate; > + > + if (!best_diff) > + return best_rate; > + > + for (shift = 1; shift < 7; shift++) { Ditto > + cur_rate = *parent_rate >> shift; > + > + if (cur_rate > rate) > + new_diff = cur_rate - rate; > + else > + new_diff = rate - cur_rate; > + > + if (!new_diff) > + return cur_rate; > + > + if (new_diff < best_diff) { > + best_diff = new_diff; > + best_rate = cur_rate; > + } > + > + if (rate > cur_rate) > + break; > + > + } > + > + return best_rate; > +} > + > +static int clk_programmable_set_parent(struct clk_hw *hw, u8 index) > +{ > + struct clk_programmable *prog = to_clk_programmable(hw); > + const struct clk_programmable_layout *layout = prog->layout; > + if (index > layout->css_mask) { > + if (index == 4 && layout->have_slck_mck) { define "4" > + prog->css = 0; > + prog->slckmck = 1; > + return 0; > + } else Style: add the "{" > + return -EINVAL; and "}" > + } > + > + prog->css = index; > + return 0; > +} > + > +static u8 clk_programmable_get_parent(struct clk_hw *hw) > +{ > + u32 tmp; > + u8 ret; > + struct clk_programmable *prog = to_clk_programmable(hw); > + struct at91_pmc *pmc = prog->pmc; > + const struct clk_programmable_layout *layout = prog->layout; > + > + tmp = pmc_read(pmc, AT91_PMC_PCKR(prog->id)); > + prog->css = tmp & layout->css_mask; > + ret = prog->css; > + if (layout->have_slck_mck) { > + prog->slckmck = !!(tmp & (1 << 8)); Ditto > + if (prog->slckmck && !ret) > + ret = 4; Ditto > + } > + > + return ret; > +} > + > +static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct clk_programmable *prog = to_clk_programmable(hw); > + unsigned long best_rate = parent_rate; > + unsigned long best_diff; > + unsigned long new_diff; > + unsigned long cur_rate; > + int shift = 0; > + > + if (rate > parent_rate) > + return parent_rate; > + else > + best_diff = parent_rate - rate; > + > + if (!best_diff) { > + prog->pres = shift; > + return 0; > + } > + > + for (shift = 1; shift < 7; shift++) { Ditto > + cur_rate = parent_rate >> shift; > + > + if (cur_rate > rate) > + new_diff = cur_rate - rate; > + else > + new_diff = rate - cur_rate; > + > + if (!new_diff) > + break; > + > + if (new_diff < best_diff) { > + best_diff = new_diff; > + best_rate = cur_rate; > + } > + > + if (rate > cur_rate) > + break; > + > + } > + > + prog->pres = shift; > + return 0; > +} > + > +static const struct clk_ops programmable_ops = { > + .prepare = clk_programmable_prepare, > + .is_prepared = clk_programmable_is_ready, > + .recalc_rate = clk_programmable_recalc_rate, > + .round_rate = clk_programmable_round_rate, > + .get_parent = clk_programmable_get_parent, > + .set_parent = clk_programmable_set_parent, > + .set_rate = clk_programmable_set_rate, > +}; > + > +static struct clk * __init > +at91_clk_register_programmable(struct at91_pmc *pmc, unsigned int irq, > + const char *name, const char **parent_names, > + u8 num_parents, u8 id, > + const struct clk_programmable_layout *layout) > +{ > + int ret; > + struct clk_programmable *prog; > + struct clk *clk = NULL; > + struct clk_init_data init; > + char irq_name[11]; > + > + id &= 7; Ditto > + > + prog = kzalloc(sizeof(*prog), GFP_KERNEL); > + if (!prog) > + return ERR_PTR(-ENOMEM); > + > + init.name = name; > + init.ops = &programmable_ops; > + init.parent_names = parent_names; > + init.num_parents = num_parents; > + init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE; > + > + prog->id = id; > + prog->layout = layout; > + prog->hw.init = &init; > + prog->pmc = pmc; > + prog->irq = irq; > + init_waitqueue_head(&prog->wait); > + irq_set_status_flags(prog->irq, IRQ_NOAUTOEN); > + snprintf(irq_name, sizeof(irq_name), "clk-prog%d", id); > + ret = request_irq(prog->irq, clk_programmable_irq_handler, > + IRQF_TRIGGER_HIGH, irq_name, prog); > + if (ret) > + return ERR_PTR(ret); > + > + clk = clk_register(NULL, &prog->hw); > + ^^ > + if (IS_ERR(clk)) > + kfree(prog); > + > + return clk; > +} > + > +static const struct clk_programmable_layout at91rm9200_programmable_layout = { > + .pres_shift = 2, > + .css_mask = 0x3, > + .have_slck_mck = 0, > +}; > + > +static const struct clk_programmable_layout at91sam9g45_programmable_layout = { > + .pres_shift = 2, > + .css_mask = 0x3, > + .have_slck_mck = 1, > +}; > + > +static const struct clk_programmable_layout at91sam9x5_programmable_layout = { > + .pres_shift = 4, > + .css_mask = 0x7, > + .have_slck_mck = 0, > +}; > + > +struct clk_prog_data { > + struct clk **clks; > + u8 *ids; > + unsigned int clk_num; > +}; > + > +static struct clk * __init > +of_clk_src_periph_get(struct of_phandle_args *clkspec, void *data) > +{ > + struct clk_prog_data *clk_data = data; > + unsigned int id = clkspec->args[0]; > + int i; > + > + if (id >= PROG_MAX) > + goto err; > + > + for (i = 0; i < clk_data->clk_num; i++) { > + if (clk_data->ids[i] == id) > + return clk_data->clks[i]; > + } > + > +err: > + pr_err("%s: invalid clock id %d\n", __func__, id); > + return ERR_PTR(-EINVAL); > +} > + > +static void __init > +of_at91_clk_prog_setup(struct device_node *np, struct at91_pmc *pmc, > + const struct clk_programmable_layout *layout) > +{ > + int num; > + u32 id; > + int i; > + unsigned int irq; > + struct clk *clk; > + int num_parents; > + u8 *ids; > + struct clk **clks; > + struct clk_prog_data *clktab; > + const char *parent_names[PROG_SOURCE_MAX]; > + const char *name; > + struct device_node *progclknp; > + > + num_parents = of_count_phandle_with_args(np, "clocks", "#clock-cells"); > + if (num_parents <= 0 || num_parents > PROG_SOURCE_MAX) > + return; > + > + for (i = 0; i < num_parents; ++i) { > + parent_names[i] = of_clk_get_parent_name(np, i); > + if (!parent_names[i]) > + return; > + } > + > + num = of_get_child_count(np); > + if (!num || num > PROG_MAX) > + return; > + > + clktab = kzalloc(sizeof(*clktab), GFP_KERNEL); > + if (!clktab) > + return; > + > + ids = kzalloc(num * sizeof(*ids), GFP_KERNEL); > + if (!ids) > + goto out_free_clktab; > + > + clks = kzalloc(num * sizeof(*clks), GFP_KERNEL); > + if (!clks) > + goto out_free_ids; > + > + i = 0; > + for_each_child_of_node(np, progclknp) { > + name = progclknp->name; > + > + if (of_property_read_u32(progclknp, "atmel,clk-id", &id)) > + goto out_free_clks; > + if (id >= PROG_MAX) > + goto out_free_clks; > + > + irq = irq_of_parse_and_map(np, 0); > + if (!irq) > + goto out_free_clks; > + > + clk = at91_clk_register_programmable(pmc, irq, name, > + parent_names, num_parents, > + id, layout); > + if (IS_ERR(clk)) > + goto out_free_clks; > + > + clks[i] = clk; > + ids[i++] = id; > + } > + > + clktab->clk_num = num; > + clktab->clks = clks; > + clktab->ids = ids; > + of_clk_add_provider(np, of_clk_src_periph_get, clktab); > + return; > + > +out_free_clks: > + kfree(clks); > +out_free_ids: > + kfree(ids); > +out_free_clktab: > + kfree(clktab); > +} > + > + > +void __init of_at91rm9200_clk_prog_setup(struct device_node *np, > + struct at91_pmc *pmc) > +{ > + of_at91_clk_prog_setup(np, pmc, &at91rm9200_programmable_layout); > +} > + > +void __init of_at91sam9g45_clk_prog_setup(struct device_node *np, > + struct at91_pmc *pmc) > +{ > + of_at91_clk_prog_setup(np, pmc, &at91sam9g45_programmable_layout); > +} > + > +void __init of_at91sam9x5_clk_prog_setup(struct device_node *np, > + struct at91_pmc *pmc) > +{ > + of_at91_clk_prog_setup(np, pmc, &at91sam9x5_programmable_layout); > +} > diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c > index 1a56f1c..66a627d 100644 > --- a/drivers/clk/at91/pmc.c > +++ b/drivers/clk/at91/pmc.c > @@ -265,6 +265,21 @@ static const struct of_device_id pmc_clk_ids[] __initdata = { > .compatible = "atmel,at91sam9x5-clk-peripheral", > .data = of_at91sam9x5_clk_periph_setup, > }, > + /* Programmable clocks */ > +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS) > + { > + .compatible = "atmel,at91rm9200-clk-programmable", > + .data = of_at91rm9200_clk_prog_setup, > + }, > + { > + .compatible = "atmel,at91sam9g45-clk-programmable", > + .data = of_at91sam9g45_clk_prog_setup, > + }, > + { > + .compatible = "atmel,at91sam9x5-clk-programmable", > + .data = of_at91sam9x5_clk_prog_setup, > + }, > +#endif > { /*sentinel*/ } > }; > > diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h > index 08c30fb..5f20dc1 100644 > --- a/drivers/clk/at91/pmc.h > +++ b/drivers/clk/at91/pmc.h > @@ -82,4 +82,13 @@ extern void __init of_at91rm9200_clk_periph_setup(struct device_node *np, > extern void __init of_at91sam9x5_clk_periph_setup(struct device_node *np, > struct at91_pmc *pmc); > > +#if defined(CONFIG_AT91_PROGRAMMABLE_CLOCKS) > +extern void __init of_at91rm9200_clk_prog_setup(struct device_node *np, > + struct at91_pmc *pmc); > +extern void __init of_at91sam9g45_clk_prog_setup(struct device_node *np, > + struct at91_pmc *pmc); > +extern void __init of_at91sam9x5_clk_prog_setup(struct device_node *np, > + struct at91_pmc *pmc); > +#endif > + > #endif /* __PMC_H_ */ > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/