Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756346Ab3JHR7y (ORCPT ); Tue, 8 Oct 2013 13:59:54 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:46098 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753013Ab3JHR7w (ORCPT ); Tue, 8 Oct 2013 13:59:52 -0400 Message-ID: <525447FF.3050106@ti.com> Date: Tue, 8 Oct 2013 12:59:27 -0500 From: Nishanth Menon User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: Tony Lindgren CC: =?ISO-8859-1?Q?Beno=EEt_Cousson?= , Felipe , Olof Johansson , , , , , Subject: Re: [PATCH V3] ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree References: <20131007192009.GA8949@atomide.com> <1381178629-13488-1-git-send-email-nm@ti.com> <20131008000515.GA2097@earth.universe> <5253F3D6.5060403@ti.com> <20131008175818.GC8313@atomide.com> In-Reply-To: <20131008175818.GC8313@atomide.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4930 Lines: 141 On 10/08/2013 12:58 PM, Tony Lindgren wrote: > * Nishanth Menon [131008 05:08]: >> On 10/07/2013 07:05 PM, Sebastian Reichel wrote: >>> On Mon, Oct 07, 2013 at 03:43:49PM -0500, Nishanth Menon wrote: >>>> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c >>>> index 39c7838..4fe5b9c 100644 >>>> --- a/arch/arm/mach-omap2/board-generic.c >>>> +++ b/arch/arm/mach-omap2/board-generic.c >>>> @@ -113,6 +113,7 @@ MACHINE_END >>>> #ifdef CONFIG_ARCH_OMAP3 >>>> static const char *omap3_boards_compat[] __initdata = { >>>> "ti,omap3", >>>> + "ti,omap343x", >>> ^^^^ >>> You used omap36xx everywhere, so I guess this should be >>> "ti,omap34xx"? >> >> 3630 has at least two variants: >> http://www.ti.com/product/omap3621 >> http://www.ti.com/product/omap3630 >> >> It got further spun off in 37xx family: >> http://www.ti.com/product/dm3730 (DM3730 and DM3725) >> >> 3430 is no longer in production - but just had a single version (at >> least what I can remember). >> >> 3530 variant of 3430 on the other hand has a few: >> http://processors.wiki.ti.com/index.php/OMAP3_Overview >> >> >> I am ok to change to ti,omap34xx if folks think that is the right >> thing to do. Personally, I might prefer to handle 35xx family slightly >> differently considering deltas. > > I've dropped that part as that's not needed for the fix AFAIK. > Here's what I've applied and pushed out to omap-for-v3.12/fixes. > > Regards, > > Tony > > From: Nishanth Menon > Date: Mon, 7 Oct 2013 15:43:49 -0500 > Subject: [PATCH] ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree > > SoC family definitions at the moment are reactive to board needs > as a result, beagle-xm would matchup with ti,omap3 which invokes > omap3430_init_early instead of omap3630_init_early. Obviously, this is > the wrong behavior. > > With clock node dts conversion, we get the following warnings before > system hangs as a result and 3630 based platforms fails to boot > (uart4 clocks are only present in OMAP3630 and not present in > OMAP3430): > > ... > omap_hwmod: uart4: cannot clk_get main_clk uart4_fck > omap_hwmod: uart4: cannot _init_clocks > > WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 > _init+0x6c/0x80() > omap_hwmod: uart4: couldn't init clocks > ... > > WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 > _enable+0x254/0x280() > omap_hwmod: timer12: enabled state can only be entered from > initialized, idle, or disabled state > ... > > WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 > _idle+0xd4/0xf8() > omap_hwmod: timer12: idle state can only be entered from enabled state > > WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 > _enable+0x254/0x280() > omap_hwmod: uart4: enabled state can only be entered from > initialized, idle, or disabled state > > So, add specific compatiblity for 3630 to allow match for Beagle-XM > platform. > > Signed-off-by: Nishanth Menon > [tony@atomide.com: left out ti,omap343x, updated comments] > Signed-off-by: Tony Lindgren > > diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts > index 0c514dc..2816bf6 100644 > --- a/arch/arm/boot/dts/omap3-beagle-xm.dts > +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts > @@ -11,7 +11,7 @@ > > / { > model = "TI OMAP3 BeagleBoard xM"; > - compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3"; > + compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; > > cpus { > cpu@0 { > diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c > index 39c7838..87162e1 100644 > --- a/arch/arm/mach-omap2/board-generic.c > +++ b/arch/arm/mach-omap2/board-generic.c > @@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") > .restart = omap3xxx_restart, > MACHINE_END > > +static const char *omap36xx_boards_compat[] __initdata = { > + "ti,omap36xx", > + NULL, > +}; > + > +DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") > + .reserve = omap_reserve, > + .map_io = omap3_map_io, > + .init_early = omap3630_init_early, > + .init_irq = omap_intc_of_init, > + .handle_irq = omap3_intc_handle_irq, > + .init_machine = omap_generic_init, > + .init_late = omap3_init_late, > + .init_time = omap3_sync32k_timer_init, > + .dt_compat = omap36xx_boards_compat, > + .restart = omap3xxx_restart, > +MACHINE_END > + > static const char *omap3_gp_boards_compat[] __initdata = { > "ti,omap3-beagle", > "timll,omap3-devkit8000", > LGTM. Thanks for doing it. -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/