Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756999Ab3JKJDH (ORCPT ); Fri, 11 Oct 2013 05:03:07 -0400 Received: from 20.mo1.mail-out.ovh.net ([188.165.45.168]:38631 "EHLO mo1.mail-out.ovh.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752105Ab3JKJDD (ORCPT ); Fri, 11 Oct 2013 05:03:03 -0400 From: Boris BREZILLON To: Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Rob Landley , Andrew Victor , Nicolas Ferre , Jean-Christophe Plagniol-Villard , Russell King , Mike Turquette , Felipe Balbi , Greg Kroah-Hartman , Grant Likely , Ludovic Desroches , Josh Wu , Richard Genoud Cc: Boris BREZILLON , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org Subject: [PATCH v4 05/17] clk: at91: add PMC main clock Date: Fri, 11 Oct 2013 10:44:49 +0200 Message-Id: <1381481090-12037-1-git-send-email-b.brezillon@overkiz.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1381477081-6041-1-git-send-email-b.brezillon@overkiz.com> References: <1381477081-6041-1-git-send-email-b.brezillon@overkiz.com> X-Ovh-Tracer-Id: 13450844712226879712 X-Ovh-Remote: 80.245.18.66 () X-Ovh-Local: 213.186.33.20 (ns0.ovh.net) X-OVH-SPAMSTATE: OK X-OVH-SPAMSCORE: -100 X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeiledrvdefucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd X-Spam-Check: DONE|U 0.5/N X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeeiledrvdefucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6762 Lines: 255 This patch adds new at91 main oscillator clock implementation using common clk framework. If rate is not provided during clock registration it is calculated using the slow clock (main clk parent in this case) rate and MCFR register. Signed-off-by: Boris BREZILLON --- drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-main.c | 189 +++++++++++++++++++++++++++++++++++++++++++ drivers/clk/at91/pmc.c | 5 ++ drivers/clk/at91/pmc.h | 3 + 4 files changed, 198 insertions(+) create mode 100644 drivers/clk/at91/clk-main.c diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile index 1d4fb21..44105bd 100644 --- a/drivers/clk/at91/Makefile +++ b/drivers/clk/at91/Makefile @@ -3,3 +3,4 @@ # obj-y += pmc.o +obj-y += clk-main.o diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c new file mode 100644 index 0000000..905ceff --- /dev/null +++ b/drivers/clk/at91/clk-main.c @@ -0,0 +1,189 @@ +/* + * drivers/clk/at91/clk-main.c + * + * Copyright (C) 2013 Boris BREZILLON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pmc.h" + +#define SLOW_CLOCK_FREQ 32768 +#define MAINF_DIV 16 +#define MAINFRDY_TIMEOUT (((MAINF_DIV + 1) * USEC_PER_SEC) / \ + SLOW_CLOCK_FREQ) +#define MAINF_LOOP_MIN_WAIT (USEC_PER_SEC / SLOW_CLOCK_FREQ) +#define MAINF_LOOP_MAX_WAIT MAINFRDY_TIMEOUT + +struct clk_main { + struct clk_hw hw; + struct at91_pmc *pmc; + unsigned long rate; + unsigned int irq; + wait_queue_head_t wait; +}; + +#define to_clk_main(hw) container_of(hw, struct clk_main, hw) + +static irqreturn_t clk_main_irq_handler(int irq, void *dev_id) +{ + struct clk_main *clkmain = (struct clk_main *)dev_id; + + wake_up(&clkmain->wait); + disable_irq_nosync(clkmain->irq); + + return IRQ_HANDLED; +} + +static int clk_main_prepare(struct clk_hw *hw) +{ + struct clk_main *clkmain = to_clk_main(hw); + struct at91_pmc *pmc = clkmain->pmc; + unsigned long halt_time, timeout; + u32 tmp; + + while (!(pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS)) { + enable_irq(clkmain->irq); + wait_event(clkmain->wait, + pmc_read(pmc, AT91_PMC_SR) & AT91_PMC_MOSCS); + } + + if (clkmain->rate) + return 0; + + timeout = jiffies + usecs_to_jiffies(MAINFRDY_TIMEOUT); + do { + halt_time = jiffies; + tmp = pmc_read(pmc, AT91_CKGR_MCFR); + if (tmp & AT91_PMC_MAINRDY) + return 0; + usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT); + } while (time_before(halt_time, timeout)); + + return 0; +} + +static int clk_main_is_prepared(struct clk_hw *hw) +{ + struct clk_main *clkmain = to_clk_main(hw); + + return !!(pmc_read(clkmain->pmc, AT91_PMC_SR) & AT91_PMC_MOSCS); +} + +static unsigned long clk_main_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u32 tmp; + struct clk_main *clkmain = to_clk_main(hw); + struct at91_pmc *pmc = clkmain->pmc; + + if (clkmain->rate) + return clkmain->rate; + + tmp = pmc_read(pmc, AT91_CKGR_MCFR) & AT91_PMC_MAINF; + clkmain->rate = (tmp * parent_rate) / MAINF_DIV; + + return clkmain->rate; +} + +static const struct clk_ops main_ops = { + .prepare = clk_main_prepare, + .is_prepared = clk_main_is_prepared, + .recalc_rate = clk_main_recalc_rate, +}; + +static struct clk * __init +at91_clk_register_main(struct at91_pmc *pmc, + unsigned int irq, + const char *name, + const char *parent_name, + unsigned long rate) +{ + int ret; + struct clk_main *clkmain; + struct clk *clk = NULL; + struct clk_init_data init; + + if (!pmc || !irq || !name) + return ERR_PTR(-EINVAL); + + if (!rate && !parent_name) + return ERR_PTR(-EINVAL); + + clkmain = kzalloc(sizeof(*clkmain), GFP_KERNEL); + if (!clkmain) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &main_ops; + init.parent_names = parent_name ? &parent_name : NULL; + init.num_parents = parent_name ? 1 : 0; + init.flags = parent_name ? 0 : CLK_IS_ROOT; + + clkmain->hw.init = &init; + clkmain->rate = rate; + clkmain->pmc = pmc; + clkmain->irq = irq; + init_waitqueue_head(&clkmain->wait); + irq_set_status_flags(clkmain->irq, IRQ_NOAUTOEN); + ret = request_irq(clkmain->irq, clk_main_irq_handler, + IRQF_TRIGGER_HIGH, "clk-main", clkmain); + if (ret) + return ERR_PTR(ret); + + clk = clk_register(NULL, &clkmain->hw); + if (IS_ERR(clk)) { + free_irq(clkmain->irq, clkmain); + kfree(clkmain); + } + + return clk; +} + + + +static void __init +of_at91_clk_main_setup(struct device_node *np, struct at91_pmc *pmc) +{ + struct clk *clk; + unsigned int irq; + const char *parent_name; + const char *name = np->name; + u32 rate = 0; + + parent_name = of_clk_get_parent_name(np, 0); + of_property_read_string(np, "clock-output-names", &name); + of_property_read_u32(np, "clock-frequency", &rate); + irq = irq_of_parse_and_map(np, 0); + if (!irq) + return; + + clk = at91_clk_register_main(pmc, irq, name, parent_name, rate); + if (IS_ERR(clk)) + return; + + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +void __init of_at91rm9200_clk_main_setup(struct device_node *np, + struct at91_pmc *pmc) +{ + of_at91_clk_main_setup(np, pmc); +} diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c index d92e46c..ccfe506 100644 --- a/drivers/clk/at91/pmc.c +++ b/drivers/clk/at91/pmc.c @@ -208,6 +208,11 @@ out_free_pmc: } static const struct of_device_id pmc_clk_ids[] __initdata = { + /* Main clock */ + { + .compatible = "atmel,at91rm9200-clk-main", + .data = of_at91rm9200_clk_main_setup + }, { /*sentinel*/ } }; diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h index b7e8397..294e230 100644 --- a/drivers/clk/at91/pmc.h +++ b/drivers/clk/at91/pmc.h @@ -55,4 +55,7 @@ static inline void pmc_write(struct at91_pmc *pmc, int offset, u32 value) return writel_relaxed(value, pmc->regbase + offset); } +extern void __init of_at91rm9200_clk_main_setup(struct device_node *np, + struct at91_pmc *pmc); + #endif /* __PMC_H_ */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/