Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752599Ab3JLGlE (ORCPT ); Sat, 12 Oct 2013 02:41:04 -0400 Received: from mail-pa0-f41.google.com ([209.85.220.41]:51751 "EHLO mail-pa0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751711Ab3JLGlB (ORCPT ); Sat, 12 Oct 2013 02:41:01 -0400 MIME-Version: 1.0 In-Reply-To: <52580B95.5010603@metafoo.de> References: <1365048389-6364-1-git-send-email-naveenkrishna.ch@gmail.com> <1381479821-17276-1-git-send-email-ch.naveen@samsung.com> <52580B95.5010603@metafoo.de> From: Naveen Krishna Ch Date: Sat, 12 Oct 2013 12:10:40 +0530 Message-ID: Subject: Re: [PATCH v3] iio: exynos_adc: use wait_for_completion_timeout instead of interruptible To: Lars-Peter Clausen Cc: Naveen Krishna Chatradhi , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, "linux-samsung-soc@vger.kernel.org" , dianders@chromium.org, gregkh@linuxfoundation.org, tomasz.figa@gmail.com Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5945 Lines: 171 On 11 October 2013 20:00, Lars-Peter Clausen wrote: > On 10/11/2013 10:23 AM, Naveen Krishna Chatradhi wrote: >> This patch does the following >> 1. use wait_for_completion_timeout instead of >> wait_for_completion_interruptible_timeout >> 2. Reset software if a timeout happens. >> 3. Also reduce the timeout to 100milli secs > > It is always good to have a description of why a chance should be done in > the commit message. It is obvious what the patch does by just looking at the > changed lines, it is not that obvious though why those lines had to be changed. > >> >> Note: submitted for review at https://patchwork.kernel.org/patch/2279591/ >> >> Signed-off-by: Naveen Krishna Chatradhi >> Cc: Doug Anderson >> Cc: Lars-Peter Clausen >> --- >> Changes since v1: >> As per discussion at >> http://marc.info/?l=linux-kernel&m=136517637228869&w=3 >> >> This patch does the following >> 1. use wait_for_completion_timeout instead of >> wait_for_completion_interruptible_timeout >> 2. Reset software if a timeout happens. >> 3. Also reduce the timeout to 100milli secs >> >> Changes since v2: >> None. >> Rebased and reposting. >> >> --- >> drivers/iio/adc/exynos_adc.c | 66 +++++++++++++++++++++++------------------- >> 1 file changed, 36 insertions(+), 30 deletions(-) >> >> diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c >> index d25b262..f18ed7e 100644 >> --- a/drivers/iio/adc/exynos_adc.c >> +++ b/drivers/iio/adc/exynos_adc.c >> @@ -82,7 +82,7 @@ enum adc_version { >> #define ADC_CON_EN_START (1u << 0) >> #define ADC_DATX_MASK 0xFFF >> >> -#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000)) >> +#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100)) >> >> struct exynos_adc { >> void __iomem *regs; >> @@ -112,6 +112,30 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev) >> return (unsigned int)match->data; >> } >> >> +static void exynos_adc_hw_init(struct exynos_adc *info) >> +{ >> + u32 con1, con2; >> + >> + if (info->version == ADC_V2) { >> + con1 = ADC_V2_CON1_SOFT_RESET; >> + writel(con1, ADC_V2_CON1(info->regs)); >> + >> + con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | >> + ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); >> + writel(con2, ADC_V2_CON2(info->regs)); >> + >> + /* Enable interrupts */ >> + writel(1, ADC_V2_INT_EN(info->regs)); >> + } else { >> + /* set default prescaler values and Enable prescaler */ >> + con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; >> + >> + /* Enable 12-bit ADC resolution */ >> + con1 |= ADC_V1_CON_RES; >> + writel(con1, ADC_V1_CON(info->regs)); >> + } >> +} >> + >> static int exynos_read_raw(struct iio_dev *indio_dev, >> struct iio_chan_spec const *chan, >> int *val, >> @@ -121,6 +145,7 @@ static int exynos_read_raw(struct iio_dev *indio_dev, >> struct exynos_adc *info = iio_priv(indio_dev); >> unsigned long timeout; >> u32 con1, con2; >> + int ret; >> >> if (mask != IIO_CHAN_INFO_RAW) >> return -EINVAL; >> @@ -145,16 +170,21 @@ static int exynos_read_raw(struct iio_dev *indio_dev, >> ADC_V1_CON(info->regs)); >> } >> >> - timeout = wait_for_completion_interruptible_timeout >> + timeout = wait_for_completion_timeout >> (&info->completion, EXYNOS_ADC_TIMEOUT); > > Nitpick: It would be nice to put the &info->completion on the same line as > the wait_for_completion... I received a comment from Grant regarding the same. I'm away from work this weekend. Will submit the code once i get back, > >> + if (timeout == 0) { >> + dev_warn(&indio_dev->dev, "Conversion timed out reseting\n"); >> + exynos_adc_hw_init(info); >> + ret = -ETIMEDOUT; >> + } else { >> + *val = info->value; >> + ret = IIO_VAL_INT; >> + } >> *val = info->value; > > This line above should probably be removed. Yes this is unnecessary. Will remove this. > >> >> mutex_unlock(&indio_dev->mlock); >> >> - if (timeout == 0) >> - return -ETIMEDOUT; >> - >> - return IIO_VAL_INT; >> + return ret; >> } >> >> static irqreturn_t exynos_adc_isr(int irq, void *dev_id) >> @@ -226,30 +256,6 @@ static int exynos_adc_remove_devices(struct device *dev, void *c) >> return 0; >> } >> >> -static void exynos_adc_hw_init(struct exynos_adc *info) >> -{ >> - u32 con1, con2; >> - >> - if (info->version == ADC_V2) { >> - con1 = ADC_V2_CON1_SOFT_RESET; >> - writel(con1, ADC_V2_CON1(info->regs)); >> - >> - con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL | >> - ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0); >> - writel(con2, ADC_V2_CON2(info->regs)); >> - >> - /* Enable interrupts */ >> - writel(1, ADC_V2_INT_EN(info->regs)); >> - } else { >> - /* set default prescaler values and Enable prescaler */ >> - con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN; >> - >> - /* Enable 12-bit ADC resolution */ >> - con1 |= ADC_V1_CON_RES; >> - writel(con1, ADC_V1_CON(info->regs)); >> - } >> -} >> - >> static int exynos_adc_probe(struct platform_device *pdev) >> { >> struct exynos_adc *info = NULL; >> > Thanks for the review. -- Shine bright, (: Nav :) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/