Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753198Ab3JLHUR (ORCPT ); Sat, 12 Oct 2013 03:20:17 -0400 Received: from tx2ehsobe004.messaging.microsoft.com ([65.55.88.14]:19538 "EHLO tx2outboundpool.messaging.microsoft.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752609Ab3JLHUP convert rfc822-to-8bit (ORCPT ); Sat, 12 Oct 2013 03:20:15 -0400 X-Forefront-Antispam-Report: CIP:70.37.183.190;KIP:(null);UIP:(null);IPV:NLI;H:mail.freescale.net;RD:none;EFVD:NLI X-SpamScore: -2 X-BigFish: VS-2(zz9371I542I1432Izz1f42h208ch1ee6h1de0h1fdah2073h1202h1e76h1d1ah1d2ah1fc6hzz1de098h1de097h8275bhz2dh2a8h839h8e2h8e3h944hd25hf0ah1220h1288h12a5h12a9h12bdh137ah13b6h1441h1504h1537h153bh15d0h162dh1631h1758h18e1h1946h19b5h19ceh1ad9h1b0ah1b2fh1fb3h1d0ch1d2eh1d3fh1dfeh1dffh1e1dh1fe8h1ff5hbe9i1155h) From: Sethi Varun-B16395 To: "joro@8bytes.org" , "iommu@lists.linux-foundation.org" , "linuxppc-dev@lists.ozlabs.org" , "linux-kernel@vger.kernel.org" , Yoder Stuart-B08248 , "alex.williamson@redhat.com" Subject: RE: [PATCH 1/2] iommu/fsl: Factor out PCI specific code. Thread-Topic: [PATCH 1/2] iommu/fsl: Factor out PCI specific code. Thread-Index: AQHOxR7l1sARH9xatkqNHFH6zdCYSZnwrD0Q Date: Sat, 12 Oct 2013 07:20:12 +0000 Message-ID: References: <1381343194-24059-1-git-send-email-Varun.Sethi@freescale.com> In-Reply-To: <1381343194-24059-1-git-send-email-Varun.Sethi@freescale.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [182.64.58.89] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-OriginatorOrg: freescale.com X-FOPE-CONNECTOR: Id%0$Dn%*$RO%0$TLS%0$FQDN%$TlsDn% Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6304 Lines: 214 Hi Joerg, Please consider these patches for 3.12. Regards Varun > -----Original Message----- > From: Sethi Varun-B16395 > Sent: Wednesday, October 09, 2013 11:57 PM > To: joro@8bytes.org; iommu@lists.linux-foundation.org; linuxppc- > dev@lists.ozabs.org; linux-kernel@vger.kernel.org; Yoder Stuart-B08248; > alex.williamson@redhat.com > Cc: Sethi Varun-B16395 > Subject: [PATCH 1/2] iommu/fsl: Factor out PCI specific code. > > Factor out PCI specific code in the PAMU driver. > > Signed-off-by: Varun Sethi > --- > drivers/iommu/fsl_pamu_domain.c | 81 +++++++++++++++++++-------------- > ------ > 1 file changed, 40 insertions(+), 41 deletions(-) > > diff --git a/drivers/iommu/fsl_pamu_domain.c > b/drivers/iommu/fsl_pamu_domain.c index c857c30..e02e1de 100644 > --- a/drivers/iommu/fsl_pamu_domain.c > +++ b/drivers/iommu/fsl_pamu_domain.c > @@ -677,13 +677,9 @@ static int handle_attach_device(struct > fsl_dma_domain *dma_domain, > return ret; > } > > -static int fsl_pamu_attach_device(struct iommu_domain *domain, > - struct device *dev) > +static void check_for_pci_dma_device(struct device **dev) > { > - struct fsl_dma_domain *dma_domain = domain->priv; > - const u32 *liodn; > - u32 liodn_cnt; > - int len, ret = 0; > +#ifdef CONFIG_PCI > struct pci_dev *pdev = NULL; > struct pci_controller *pci_ctl; > > @@ -691,25 +687,38 @@ static int fsl_pamu_attach_device(struct > iommu_domain *domain, > * Use LIODN of the PCI controller while attaching a > * PCI device. > */ > - if (dev->bus == &pci_bus_type) { > - pdev = to_pci_dev(dev); > + if ((*dev)->bus == &pci_bus_type) { > + pdev = to_pci_dev(*dev); > pci_ctl = pci_bus_to_host(pdev->bus); > /* > * make dev point to pci controller device > * so we can get the LIODN programmed by > * u-boot. > */ > - dev = pci_ctl->parent; > + *dev = pci_ctl->parent; > } > +#endif > +} > > - liodn = of_get_property(dev->of_node, "fsl,liodn", &len); > +static int fsl_pamu_attach_device(struct iommu_domain *domain, > + struct device *dev) > +{ > + struct fsl_dma_domain *dma_domain = domain->priv; > + struct device *dma_dev = dev; > + const u32 *liodn; > + u32 liodn_cnt; > + int len, ret = 0; > + > + check_for_pci_dma_device(&dma_dev); > + > + liodn = of_get_property(dma_dev->of_node, "fsl,liodn", &len); > if (liodn) { > liodn_cnt = len / sizeof(u32); > ret = handle_attach_device(dma_domain, dev, > liodn, liodn_cnt); > } else { > pr_debug("missing fsl,liodn property at %s\n", > - dev->of_node->full_name); > + dma_dev->of_node->full_name); > ret = -EINVAL; > } > > @@ -720,32 +729,18 @@ static void fsl_pamu_detach_device(struct > iommu_domain *domain, > struct device *dev) > { > struct fsl_dma_domain *dma_domain = domain->priv; > + struct device *dma_dev = dev; > const u32 *prop; > int len; > - struct pci_dev *pdev = NULL; > - struct pci_controller *pci_ctl; > > - /* > - * Use LIODN of the PCI controller while detaching a > - * PCI device. > - */ > - if (dev->bus == &pci_bus_type) { > - pdev = to_pci_dev(dev); > - pci_ctl = pci_bus_to_host(pdev->bus); > - /* > - * make dev point to pci controller device > - * so we can get the LIODN programmed by > - * u-boot. > - */ > - dev = pci_ctl->parent; > - } > + check_for_pci_dma_device(&dma_dev); > > - prop = of_get_property(dev->of_node, "fsl,liodn", &len); > + prop = of_get_property(dma_dev->of_node, "fsl,liodn", &len); > if (prop) > detach_device(dev, dma_domain); > else > pr_debug("missing fsl,liodn property at %s\n", > - dev->of_node->full_name); > + dma_dev->of_node->full_name); > } > > static int configure_domain_geometry(struct iommu_domain *domain, void > *data) @@ -905,6 +900,7 @@ static struct iommu_group > *get_device_iommu_group(struct device *dev) > return group; > } > > +#ifdef CONFIG_PCI > static bool check_pci_ctl_endpt_part(struct pci_controller *pci_ctl) { > u32 version; > @@ -945,13 +941,18 @@ static struct iommu_group > *get_shared_pci_device_group(struct pci_dev *pdev) > return NULL; > } > > -static struct iommu_group *get_pci_device_group(struct pci_dev *pdev) > +static struct iommu_group *get_pci_device_group(struct device *dev) > { > struct pci_controller *pci_ctl; > bool pci_endpt_partioning; > struct iommu_group *group = NULL; > - struct pci_dev *bridge, *dma_pdev = NULL; > + struct pci_dev *bridge, *pdev; > + struct pci_dev *dma_pdev = NULL; > > + pdev = to_pci_dev(dev); > + /* Don't create device groups for virtual PCI bridges */ > + if (pdev->subordinate) > + return NULL; > pci_ctl = pci_bus_to_host(pdev->bus); > pci_endpt_partioning = check_pci_ctl_endpt_part(pci_ctl); > /* We can partition PCIe devices so assign device group to the > device */ @@ -1044,11 +1045,11 @@ root_bus: > > return group; > } > +#endif > > static int fsl_pamu_add_device(struct device *dev) { > struct iommu_group *group = NULL; > - struct pci_dev *pdev; > const u32 *prop; > int ret, len; > > @@ -1056,19 +1057,15 @@ static int fsl_pamu_add_device(struct device > *dev) > * For platform devices we allocate a separate group for > * each of the devices. > */ > - if (dev->bus == &pci_bus_type) { > - pdev = to_pci_dev(dev); > - /* Don't create device groups for virtual PCI bridges */ > - if (pdev->subordinate) > - return 0; > - > - group = get_pci_device_group(pdev); > - > - } else { > + if (dev->bus == &platform_bus_type) { > prop = of_get_property(dev->of_node, "fsl,liodn", &len); > if (prop) > group = get_device_iommu_group(dev); > } > +#ifdef CONFIG_PCI > + else > + group = get_pci_device_group(dev); > +#endif > > if (!group || IS_ERR(group)) > return PTR_ERR(group); > @@ -1166,7 +1163,9 @@ int pamu_domain_init() > return ret; > > bus_set_iommu(&platform_bus_type, &fsl_pamu_ops); > +#ifdef CONFIG_PCI > bus_set_iommu(&pci_bus_type, &fsl_pamu_ops); > +#endif > > return ret; > } > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/