Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933418Ab3JOFcX (ORCPT ); Tue, 15 Oct 2013 01:32:23 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:34891 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933398Ab3JOFcQ (ORCPT ); Tue, 15 Oct 2013 01:32:16 -0400 Message-ID: <525CD324.8030107@ti.com> Date: Tue, 15 Oct 2013 11:01:16 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130803 Thunderbird/17.0.8 MIME-Version: 1.0 To: Roger Quadros CC: , Vivek Gautam , , , , , , , , , , , , , , , , , , , , Subject: Re: [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework References: <1378136591-7463-1-git-send-email-kishon@ti.com> <1378136591-7463-3-git-send-email-kishon@ti.com> <525814A9.7060106@ti.com> <525BB8C0.1070802@ti.com> <525BC5A9.3060904@ti.com> In-Reply-To: <525BC5A9.3060904@ti.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9005 Lines: 264 Hi Roger, On Monday 14 October 2013 03:51 PM, Roger Quadros wrote: > +Vivek > > On 10/14/2013 12:26 PM, Kishon Vijay Abraham I wrote: >> Hi Roger, >> >> On Friday 11 October 2013 08:39 PM, Roger Quadros wrote: >>> Hi, >>> >>> On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote: >>>> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit, >>>> power_on and power_off the following APIs are used phy_init(), phy_exit(), >>>> phy_power_on() and phy_power_off(). >>>> >>>> However using the old USB phy library wont be removed till the PHYs of all >>>> other SoC's using dwc3 core is adapted to the Generic PHY Framework. >>>> >>>> Signed-off-by: Kishon Vijay Abraham I >>>> --- >>>> Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++- >>>> drivers/usb/dwc3/Kconfig | 1 + >>>> drivers/usb/dwc3/core.c | 49 ++++++++++++++++++++++++ >>>> drivers/usb/dwc3/core.h | 7 ++++ >>>> 4 files changed, 61 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> index e807635..471366d 100644 >>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt >>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt >>>> @@ -6,11 +6,13 @@ Required properties: >>>> - compatible: must be "snps,dwc3" >>>> - reg : Address and length of the register set for the device >>>> - interrupts: Interrupts used by the dwc3 controller. >>>> + >>>> +Optional properties: >>>> - usb-phy : array of phandle for the PHY device. The first element >>>> in the array is expected to be a handle to the USB2/HS PHY and >>>> the second element is expected to be a handle to the USB3/SS PHY >>>> - >>>> -Optional properties: >>>> + - phys: from the *Generic PHY* bindings >>>> + - phy-names: from the *Generic PHY* bindings >>>> - tx-fifo-resize: determines if the FIFO *has* to be reallocated. >>>> >>>> This is usually a subnode to DWC3 glue to which it is connected. >>>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig >>>> index cfc16dd..ad7ce83 100644 >>>> --- a/drivers/usb/dwc3/Kconfig >>>> +++ b/drivers/usb/dwc3/Kconfig >>>> @@ -3,6 +3,7 @@ config USB_DWC3 >>>> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA >>>> depends on EXTCON >>>> select USB_PHY >>>> + select GENERIC_PHY >>>> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD >>>> help >>>> Say Y or M here if your system has a Dual Role SuperSpeed >>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >>>> index 428c29e..485d365 100644 >>>> --- a/drivers/usb/dwc3/core.c >>>> +++ b/drivers/usb/dwc3/core.c >>>> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) >>>> >>>> usb_phy_init(dwc->usb2_phy); >>>> usb_phy_init(dwc->usb3_phy); >>> >>> How about adding >>> + if (dwc->usb2_phy) >>> + usb_phy_init(dwc->usb2_phy); >>> + if (dwc->usb3_phy) >>> + usb_phy_init(dwc->usb3_phy); >> >> Thankfully that usb_phy_init will check if phy is NULL. >>> >>> both usb phy and generic phy shouldn't be present together. >> >> ok. >>> >>>> + >>>> + if (dwc->usb2_generic_phy) >>>> + phy_init(dwc->usb2_generic_phy); >>>> + if (dwc->usb3_generic_phy) >>>> + phy_init(dwc->usb3_generic_phy); >>>> + >>>> mdelay(100); >>>> >>>> /* Clear USB3 PHY reset */ >>>> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc) >>>> { >>>> usb_phy_shutdown(dwc->usb2_phy); >>>> usb_phy_shutdown(dwc->usb3_phy); >>> >>> here as well >>> >>>> + >>>> + if (dwc->usb2_generic_phy) >>>> + phy_power_off(dwc->usb2_generic_phy); >>>> + if (dwc->usb3_generic_phy) >>>> + phy_power_off(dwc->usb3_generic_phy); >>>> } >>>> >>>> #define DWC3_ALIGN_MASK (16 - 1) >>>> @@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev) >>>> dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); >>>> } >>>> >>>> + if (of_property_read_bool(node, "phys") || pdata->has_phy) { >>>> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); >>>> + if (IS_ERR(dwc->usb2_generic_phy)) { >>>> + dev_err(dev, "no usb2 phy configured yet"); >>>> + return PTR_ERR(dwc->usb2_generic_phy); >>>> + } >>>> + >>>> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); >>>> + if (IS_ERR(dwc->usb3_generic_phy)) { >>>> + dev_err(dev, "no usb3 phy configured yet"); >>>> + return PTR_ERR(dwc->usb3_generic_phy); >>>> + } >>> >>> better to add >>> + /* Don't use USB PHY if generic PHY was found */ >>> + dwc->usb2_phy = dwc->usb3_phy = NULL; >> >> ok. >>> >>>> + } else { >>> >>> not required as we've used kzalloc for dwc. >>> >>>> + dwc->usb2_generic_phy = NULL; >>>> + dwc->usb3_generic_phy = NULL; >>>> + } >>>> + >>>> /* default to superspeed if no maximum_speed passed */ >>>> if (dwc->maximum_speed == USB_SPEED_UNKNOWN) >>>> dwc->maximum_speed = USB_SPEED_SUPER; >>>> @@ -450,6 +478,11 @@ static int dwc3_probe(struct platform_device *pdev) >>> >>> if (dwc->usb2_phy) >>> >>>> usb_phy_set_suspend(dwc->usb2_phy, 0); >>> >>> if (dwc->usb3_phy) >>> >>>> usb_phy_set_suspend(dwc->usb3_phy, 0); >>>> >>>> + if (dwc->usb2_generic_phy) >>>> + phy_power_on(dwc->usb2_generic_phy); >>>> + if (dwc->usb3_generic_phy) >>>> + phy_power_on(dwc->usb3_generic_phy); >>>> + >>>> spin_lock_init(&dwc->lock); >>>> platform_set_drvdata(pdev, dwc); >>>> >>>> @@ -576,6 +609,11 @@ static int dwc3_remove(struct platform_device *pdev) >>> >>> if (dwc->usb2_phy) >>>> usb_phy_set_suspend(dwc->usb2_phy, 1); >>> >>> if (dwc->usb3_phy) >>>> usb_phy_set_suspend(dwc->usb3_phy, 1); >>>> >>>> + if (dwc->usb2_generic_phy) >>>> + phy_power_off(dwc->usb2_generic_phy); >>>> + if (dwc->usb3_generic_phy) >>>> + phy_power_off(dwc->usb3_generic_phy); >>>> + >>>> pm_runtime_put(&pdev->dev); >>>> pm_runtime_disable(&pdev->dev); >>>> >>>> @@ -673,6 +711,11 @@ static int dwc3_suspend(struct device *dev) >>> >>> if (dwc->usb3_phy) >>>> usb_phy_shutdown(dwc->usb3_phy); >>> >>> if (dwc->usb2_phy) >>>> usb_phy_shutdown(dwc->usb2_phy); >>>> >>>> + if (dwc->usb2_generic_phy) >>>> + phy_exit(dwc->usb2_generic_phy); >>>> + if (dwc->usb3_generic_phy) >>>> + phy_exit(dwc->usb3_generic_phy); >>>> + >>>> return 0; >>>> } >>>> >>>> @@ -683,6 +726,12 @@ static int dwc3_resume(struct device *dev) >>>> >>> >>> if (dwc->usb3_phy) >>>> usb_phy_init(dwc->usb3_phy); >>> >>> if (dwc->usb2_phy) >>>> usb_phy_init(dwc->usb2_phy); >>>> + >>>> + if (dwc->usb2_generic_phy) >>>> + phy_init(dwc->usb2_generic_phy); >>>> + if (dwc->usb3_generic_phy) >>>> + phy_init(dwc->usb3_generic_phy); >>>> + >>>> msleep(100); >>>> >>>> spin_lock_irqsave(&dwc->lock, flags); >>>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h >>>> index f8af8d4..01ec7d7 100644 >>>> --- a/drivers/usb/dwc3/core.h >>>> +++ b/drivers/usb/dwc3/core.h >>>> @@ -31,6 +31,8 @@ >>>> #include >>>> #include >>>> >>>> +#include >>>> + >>>> /* Global constants */ >>>> #define DWC3_EP0_BOUNCE_SIZE 512 >>>> #define DWC3_ENDPOINTS_NUM 32 >>>> @@ -613,6 +615,8 @@ struct dwc3_scratchpad_array { >>>> * @dr_mode: requested mode of operation >>>> * @usb2_phy: pointer to USB2 PHY >>>> * @usb3_phy: pointer to USB3 PHY >>>> + * @usb2_generic_phy: pointer to USB2 PHY >>>> + * @usb3_generic_phy: pointer to USB3 PHY >>>> * @dcfg: saved contents of DCFG register >>>> * @gctl: saved contents of GCTL register >>>> * @is_selfpowered: true when we are selfpowered >>>> @@ -665,6 +669,9 @@ struct dwc3 { >>>> struct usb_phy *usb2_phy; >>>> struct usb_phy *usb3_phy; >>>> >>>> + struct phy *usb2_generic_phy; >>>> + struct phy *usb3_generic_phy; >>>> + >>>> void __iomem *regs; >>>> size_t regs_size; >>>> >>>> >> >> Do you have any suggestions on how to get only individual PHYs? like only >> usb2phy or usb3phy? > > My earlier understanding was that both PHYs are needed only if .speed is "super-speed" > and only usb2phy is needed for "high-speed". But as per Vivek's email it seems > Samsung's exynos5 SoC doesn't need usb2phy for "super-speed". > > So to keeps things flexible, I can propose the following approach > - if speed == 'high-speed' usb2phy must be present. usb3phy will be ignored if supplied. > - if speed == 'super-speed' usb3phy must be present and usb2phy is optional but must be > initialized if supplied. > - if speed is not specified, we default to 'super-speed'. > > Felipe, does this address the issue you were facing with OMAP5? IIRC, even if the speed is high speed, you still need to power on the USB3 PHY. Or else even high speed mode wasn't working in OMAP5. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/