MIME-Version: 1.0
In-Reply-To: <1381960909-1735-4-git-send-email-tim.kryger@linaro.org>
References: <1381960909-1735-1-git-send-email-tim.kryger@linaro.org>
	<1381960909-1735-4-git-send-email-tim.kryger@linaro.org>
Date: Wed, 16 Oct 2013 21:32:51 -0700
Message-ID: <CAEPRUYqqxLevwM6dRpGUnfCgF2qZ_NVTDYTzKoFg+zbOPggfMQ@mail.gmail.com>
Subject: Re: [RESEND PATCH 3/4] ARM: dts: bcm281xx: Add i2c busses
From: Christian Daudt <bcm@fixthebug.org>
To: Tim Kryger <tim.kryger@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>, Pawel Moll <pawel.moll@arm.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Stephen Warren <swarren@wwwdotorg.org>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Rob Landley <rob@landley.net>, Wolfram Sang <wsa@the-dreams.de>,
        Grant Likely <grant.likely@linaro.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-i2c@vger.kernel.org,
        "linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>
Content-Type: text/plain; charset=ISO-8859-1
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2942
Lines: 82

Hi Tim,
 This patch does not work as it relies on the yet-unmerged clock code
for bcm11351. This patch does not apply to -rc, and when tweaked it
does not compile as it references  non-existent bsc_clks.
 Has the clk patches been submitted yet ? Applying this will have to
wait until those have been accepted.

 thanks,
   csd


On Wed, Oct 16, 2013 at 3:01 PM, Tim Kryger <tim.kryger@linaro.org> wrote:
> Add the DTS nodes for all the i2c busses in the SoC.
>
> Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
> Reviewed-by: Christian Daudt <csd@broadcom.com>
> Reviewed-by: Matt Porter <matt.porter@linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
> ---
>  arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> index 1246885..4bfd7e3 100644
> --- a/arch/arm/boot/dts/bcm11351.dtsi
> +++ b/arch/arm/boot/dts/bcm11351.dtsi
> @@ -146,6 +146,46 @@
>                 status = "disabled";
>         };
>
> +       i2c@3e016000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3e016000 0x80>;
> +               interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&bsc1_clk>;
> +               status = "disabled";
> +       };
> +
> +       i2c@3e017000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3e017000 0x80>;
> +               interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&bsc2_clk>;
> +               status = "disabled";
> +       };
> +
> +       i2c@3e018000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3e018000 0x80>;
> +               interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&bsc3_clk>;
> +               status = "disabled";
> +       };
> +
> +       i2c@3500d000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3500d000 0x80>;
> +               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&pmu_bsc_clk>;
> +               status = "disabled";
> +       };
> +
>         clocks {
>                 bsc1_clk: bsc1 {
>                         compatible = "fixed-clock";
> --
> 1.8.0.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/