Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932295Ab3JRAfA (ORCPT ); Thu, 17 Oct 2013 20:35:00 -0400 Received: from terminus.zytor.com ([198.137.202.10]:50204 "EHLO terminus.zytor.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751960Ab3JRAe5 (ORCPT ); Thu, 17 Oct 2013 20:34:57 -0400 Date: Thu, 17 Oct 2013 17:34:43 -0700 From: tip-bot for Kuppuswamy Sathyanarayanan Message-ID: Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org, david.a.cohen@linux.intel.com, sathyanarayanan.kuppuswamy@linux.intel.com, tglx@linutronix.de, hpa@linux.intel.com Reply-To: mingo@kernel.org, hpa@zytor.com, linux-kernel@vger.kernel.org, sathyanarayanan.kuppuswamy@linux.intel.com, david.a.cohen@linux.intel.com, tglx@linutronix.de, hpa@linux.intel.com In-Reply-To: <1382049336-21316-10-git-send-email-david.a.cohen@linux.intel.com> References: <1382049336-21316-10-git-send-email-david.a.cohen@linux.intel.com> To: linux-tip-commits@vger.kernel.org Subject: [tip:x86/intel-mid] intel_mid: Moved SFI related code to sfi.c Git-Commit-ID: aeedb370e7398fb5b39185b295d36f2da0653215 X-Mailer: tip-git-log-daemon Robot-ID: Robot-Unsubscribe: Contact to get blacklisted from these emails MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.1 (terminus.zytor.com [127.0.0.1]); Thu, 17 Oct 2013 17:34:50 -0700 (PDT) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29135 Lines: 1052 Commit-ID: aeedb370e7398fb5b39185b295d36f2da0653215 Gitweb: http://git.kernel.org/tip/aeedb370e7398fb5b39185b295d36f2da0653215 Author: Kuppuswamy Sathyanarayanan AuthorDate: Thu, 17 Oct 2013 15:35:33 -0700 Committer: H. Peter Anvin CommitDate: Thu, 17 Oct 2013 16:40:51 -0700 intel_mid: Moved SFI related code to sfi.c Moved SFI specific parsing/handling code to sfi.c. This will enable us to reuse our intel-mid code for platforms that supports firmware interfaces other than SFI (like ACPI). Signed-off-by: Kuppuswamy Sathyanarayanan Link: http://lkml.kernel.org/r/1382049336-21316-10-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/intel-mid.h | 1 + arch/x86/platform/intel-mid/Makefile | 2 + arch/x86/platform/intel-mid/intel-mid.c | 451 +---------------------------- arch/x86/platform/intel-mid/sfi.c | 485 ++++++++++++++++++++++++++++++++ 4 files changed, 489 insertions(+), 450 deletions(-) diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index ad236ae..3b0e7a7 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -15,6 +15,7 @@ extern int intel_mid_pci_init(void); extern int __init sfi_parse_mrtc(struct sfi_table_header *table); +extern int __init sfi_parse_mtmr(struct sfi_table_header *table); extern int sfi_mrtc_num; extern struct sfi_rtc_table_entry sfi_mrtc_array[]; diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile index de29635..b11e5b2 100644 --- a/arch/x86/platform/intel-mid/Makefile +++ b/arch/x86/platform/intel-mid/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o obj-$(CONFIG_X86_INTEL_MID) += intel_mid_vrtc.o obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o +# SFI specific code +obj-$(CONFIG_SFI) += sfi.o diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c index 40a3ff8..4091569 100644 --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -18,19 +18,9 @@ #include #include #include -#include -#include -#include -#include -#include -#include -#include #include #include #include -#include -#include -#include #include #include @@ -68,19 +58,11 @@ enum intel_mid_timer_options intel_mid_timer_options; -static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; -static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; enum intel_mid_cpu_type __intel_mid_cpu_chip; EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip); -int sfi_mtimer_num; - -struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; -EXPORT_SYMBOL_GPL(sfi_mrtc_array); -int sfi_mrtc_num; static void __init ipc_device_handler(struct sfi_device_table_entry *pentry, struct devs_id *dev); - static void intel_mid_power_off(void) { } @@ -90,114 +72,6 @@ static void intel_mid_reboot(void) intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); } -/* parse all the mtimer info to a static mtimer array */ -static int __init sfi_parse_mtmr(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_timer_table_entry *pentry; - struct mpc_intsrc mp_irq; - int totallen; - - sb = (struct sfi_table_simple *)table; - if (!sfi_mtimer_num) { - sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, - struct sfi_timer_table_entry); - pentry = (struct sfi_timer_table_entry *) sb->pentry; - totallen = sfi_mtimer_num * sizeof(*pentry); - memcpy(sfi_mtimer_array, pentry, totallen); - } - - pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); - pentry = sfi_mtimer_array; - for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { - pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz," - " irq = %d\n", totallen, (u32)pentry->phys_addr, - pentry->freq_hz, pentry->irq); - if (!pentry->irq) - continue; - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; -/* triggering mode edge bit 2-3, active high polarity bit 0-1 */ - mp_irq.irqflag = 5; - mp_irq.srcbus = MP_BUS_ISA; - mp_irq.srcbusirq = pentry->irq; /* IRQ */ - mp_irq.dstapic = MP_APIC_ALL; - mp_irq.dstirq = pentry->irq; - mp_save_irq(&mp_irq); - } - - return 0; -} - -struct sfi_timer_table_entry *sfi_get_mtmr(int hint) -{ - int i; - if (hint < sfi_mtimer_num) { - if (!sfi_mtimer_usage[hint]) { - pr_debug("hint taken for timer %d irq %d\n", - hint, sfi_mtimer_array[hint].irq); - sfi_mtimer_usage[hint] = 1; - return &sfi_mtimer_array[hint]; - } - } - /* take the first timer available */ - for (i = 0; i < sfi_mtimer_num;) { - if (!sfi_mtimer_usage[i]) { - sfi_mtimer_usage[i] = 1; - return &sfi_mtimer_array[i]; - } - i++; - } - return NULL; -} - -void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) -{ - int i; - for (i = 0; i < sfi_mtimer_num;) { - if (mtmr->irq == sfi_mtimer_array[i].irq) { - sfi_mtimer_usage[i] = 0; - return; - } - i++; - } -} - -/* parse all the mrtc info to a global mrtc array */ -int __init sfi_parse_mrtc(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_rtc_table_entry *pentry; - struct mpc_intsrc mp_irq; - - int totallen; - - sb = (struct sfi_table_simple *)table; - if (!sfi_mrtc_num) { - sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, - struct sfi_rtc_table_entry); - pentry = (struct sfi_rtc_table_entry *)sb->pentry; - totallen = sfi_mrtc_num * sizeof(*pentry); - memcpy(sfi_mrtc_array, pentry, totallen); - } - - pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); - pentry = sfi_mrtc_array; - for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { - pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", - totallen, (u32)pentry->phys_addr, pentry->irq); - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = 0xf; /* level trigger and active low */ - mp_irq.srcbus = MP_BUS_ISA; - mp_irq.srcbusirq = pentry->irq; /* IRQ */ - mp_irq.dstapic = MP_APIC_ALL; - mp_irq.dstirq = pentry->irq; - mp_save_irq(&mp_irq); - } - return 0; -} - static unsigned long __init intel_mid_calibrate_tsc(void) { unsigned long fast_calibrate; @@ -339,55 +213,6 @@ static inline int __init setup_x86_intel_mid_timer(char *arg) } __setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer); -/* - * Parsing GPIO table first, since the DEVS table will need this table - * to map the pin name to the actual pin. - */ -static struct sfi_gpio_table_entry *gpio_table; -static int gpio_num_entry; - -static int __init sfi_parse_gpio(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_gpio_table_entry *pentry; - int num, i; - - if (gpio_table) - return 0; - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); - pentry = (struct sfi_gpio_table_entry *)sb->pentry; - - gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL); - if (!gpio_table) - return -1; - memcpy(gpio_table, pentry, num * sizeof(*pentry)); - gpio_num_entry = num; - - pr_debug("GPIO pin info:\n"); - for (i = 0; i < num; i++, pentry++) - pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," - " pin = %d\n", i, - pentry->controller_name, - pentry->pin_name, - pentry->pin_no); - return 0; -} - -static int get_gpio_by_name(const char *name) -{ - struct sfi_gpio_table_entry *pentry = gpio_table; - int i; - - if (!pentry) - return -1; - for (i = 0; i < gpio_num_entry; i++, pentry++) { - if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) - return pentry->pin_no; - } - return -1; -} - /* the offset for the mapping of global gpio pin to irq */ #define INTEL_MID_IRQ_OFFSET 0x100 @@ -703,197 +528,6 @@ static const struct devs_id __initconst device_ids[] = { { 0 } }; -#define MAX_IPCDEVS 24 -static struct platform_device *ipc_devs[MAX_IPCDEVS]; -static int ipc_next_dev; - -#define MAX_SCU_SPI 24 -static struct spi_board_info *spi_devs[MAX_SCU_SPI]; -static int spi_next_dev; - -#define MAX_SCU_I2C 24 -static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; -static int i2c_bus[MAX_SCU_I2C]; -static int i2c_next_dev; - -static void __init intel_scu_device_register(struct platform_device *pdev) -{ - if (ipc_next_dev == MAX_IPCDEVS) - pr_err("too many SCU IPC devices"); - else - ipc_devs[ipc_next_dev++] = pdev; -} - -static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) -{ - struct spi_board_info *new_dev; - - if (spi_next_dev == MAX_SCU_SPI) { - pr_err("too many SCU SPI devices"); - return; - } - - new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); - if (!new_dev) { - pr_err("failed to alloc mem for delayed spi dev %s\n", - sdev->modalias); - return; - } - memcpy(new_dev, sdev, sizeof(*sdev)); - - spi_devs[spi_next_dev++] = new_dev; -} - -static void __init intel_scu_i2c_device_register(int bus, - struct i2c_board_info *idev) -{ - struct i2c_board_info *new_dev; - - if (i2c_next_dev == MAX_SCU_I2C) { - pr_err("too many SCU I2C devices"); - return; - } - - new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); - if (!new_dev) { - pr_err("failed to alloc mem for delayed i2c dev %s\n", - idev->type); - return; - } - memcpy(new_dev, idev, sizeof(*idev)); - - i2c_bus[i2c_next_dev] = bus; - i2c_devs[i2c_next_dev++] = new_dev; -} - -BLOCKING_NOTIFIER_HEAD(intel_scu_notifier); -EXPORT_SYMBOL_GPL(intel_scu_notifier); - -/* Called by IPC driver */ -void intel_scu_devices_create(void) -{ - int i; - - for (i = 0; i < ipc_next_dev; i++) - platform_device_add(ipc_devs[i]); - - for (i = 0; i < spi_next_dev; i++) - spi_register_board_info(spi_devs[i], 1); - - for (i = 0; i < i2c_next_dev; i++) { - struct i2c_adapter *adapter; - struct i2c_client *client; - - adapter = i2c_get_adapter(i2c_bus[i]); - if (adapter) { - client = i2c_new_device(adapter, i2c_devs[i]); - if (!client) - pr_err("can't create i2c device %s\n", - i2c_devs[i]->type); - } else - i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); - } - intel_scu_notifier_post(SCU_AVAILABLE, NULL); -} -EXPORT_SYMBOL_GPL(intel_scu_devices_create); - -/* Called by IPC driver */ -void intel_scu_devices_destroy(void) -{ - int i; - - intel_scu_notifier_post(SCU_DOWN, NULL); - - for (i = 0; i < ipc_next_dev; i++) - platform_device_del(ipc_devs[i]); -} -EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); - -static void __init install_irq_resource(struct platform_device *pdev, int irq) -{ - /* Single threaded */ - static struct resource __initdata res = { - .name = "IRQ", - .flags = IORESOURCE_IRQ, - }; - res.start = irq; - platform_device_add_resources(pdev, &res, 1); -} - -static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct platform_device *pdev; - void *pdata = NULL; - - pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n", - pentry->name, pentry->irq); - pdata = dev->get_platform_data(pentry); - - pdev = platform_device_alloc(pentry->name, 0); - if (pdev == NULL) { - pr_err("out of memory for SFI platform device '%s'.\n", - pentry->name); - return; - } - install_irq_resource(pdev, pentry->irq); - - pdev->dev.platform_data = pdata; - platform_device_add(pdev); -} - -static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct spi_board_info spi_info; - void *pdata = NULL; - - memset(&spi_info, 0, sizeof(spi_info)); - strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); - spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); - spi_info.bus_num = pentry->host_num; - spi_info.chip_select = pentry->addr; - spi_info.max_speed_hz = pentry->max_freq; - pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n", - spi_info.bus_num, - spi_info.modalias, - spi_info.irq, - spi_info.max_speed_hz, - spi_info.chip_select); - - pdata = dev->get_platform_data(&spi_info); - - spi_info.platform_data = pdata; - if (dev->delay) - intel_scu_spi_device_register(&spi_info); - else - spi_register_board_info(&spi_info, 1); -} - -static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct i2c_board_info i2c_info; - void *pdata = NULL; - - memset(&i2c_info, 0, sizeof(i2c_info)); - strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); - i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); - i2c_info.addr = pentry->addr; - pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n", - pentry->host_num, - i2c_info.type, - i2c_info.irq, - i2c_info.addr); - pdata = dev->get_platform_data(&i2c_info); - i2c_info.platform_data = pdata; - - if (dev->delay) - intel_scu_i2c_device_register(pentry->host_num, &i2c_info); - else - i2c_register_board_info(pentry->host_num, &i2c_info, 1); -} - static void __init ipc_device_handler(struct sfi_device_table_entry *pentry, struct devs_id *dev) { @@ -934,89 +568,6 @@ static void __init ipc_device_handler(struct sfi_device_table_entry *pentry, intel_scu_device_register(pdev); } -static struct devs_id __init *get_device_id(u8 type, char *name) -{ - struct devs_id *dev = device_ids; - - if (device_ids == NULL) - return NULL; - - while (dev->name[0]) { - if (dev->type == type && - !strncmp(dev->name, name, SFI_NAME_LEN)) { - return dev; - } - dev++; - } - - return NULL; -} - -static int __init sfi_parse_devs(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_device_table_entry *pentry; - struct devs_id *dev = NULL; - int num, i; - int ioapic; - struct io_apic_irq_attr irq_attr; - - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); - pentry = (struct sfi_device_table_entry *)sb->pentry; - - for (i = 0; i < num; i++, pentry++) { - int irq = pentry->irq; - - if (irq != (u8)0xff) { /* native RTE case */ - /* these SPI2 devices are not exposed to system as PCI - * devices, but they have separate RTE entry in IOAPIC - * so we have to enable them one by one here - */ - ioapic = mp_find_ioapic(irq); - irq_attr.ioapic = ioapic; - irq_attr.ioapic_pin = irq; - irq_attr.trigger = 1; - irq_attr.polarity = 1; - io_apic_set_pci_routing(NULL, irq, &irq_attr); - } else - irq = 0; /* No irq */ - - dev = get_device_id(pentry->type, pentry->name); - - if ((dev == NULL) || (dev->get_platform_data == NULL)) - continue; - - if (dev->device_handler) { - dev->device_handler(pentry, dev); - } else { - switch (pentry->type) { - case SFI_DEV_TYPE_IPC: - sfi_handle_ipc_dev(pentry, dev); - break; - case SFI_DEV_TYPE_SPI: - sfi_handle_spi_dev(pentry, dev); - break; - case SFI_DEV_TYPE_I2C: - sfi_handle_i2c_dev(pentry, dev); - break; - case SFI_DEV_TYPE_UART: - case SFI_DEV_TYPE_HSI: - default: - break; - } - } - } - return 0; -} - -static int __init intel_mid_platform_init(void) -{ - sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); - sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); - return 0; -} -arch_initcall(intel_mid_platform_init); /* * we will search these buttons in SFI GPIO table (by name) @@ -1078,4 +629,4 @@ static int __init pb_keys_init(void) } return 0; } -late_initcall(pb_keys_init); +late_initcall(pb_keys_init); \ No newline at end of file diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c new file mode 100644 index 0000000..2f8196d --- /dev/null +++ b/arch/x86/platform/intel-mid/sfi.c @@ -0,0 +1,485 @@ +/* + * intel_mid_sfi.c: Intel MID SFI initialization code + * + * (C) Copyright 2013 Intel Corporation + * Author: Sathyanarayanan Kuppuswamy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "intel_mid_weak_decls.h" + +#define SFI_SIG_OEM0 "OEM0" +#define MAX_IPCDEVS 24 +#define MAX_SCU_SPI 24 +#define MAX_SCU_I2C 24 + +static struct platform_device *ipc_devs[MAX_IPCDEVS]; +static struct spi_board_info *spi_devs[MAX_SCU_SPI]; +static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; +static struct sfi_gpio_table_entry *gpio_table; +static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; +static int ipc_next_dev; +static int spi_next_dev; +static int i2c_next_dev; +static int i2c_bus[MAX_SCU_I2C]; +static int gpio_num_entry; +static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; +int sfi_mrtc_num; +int sfi_mtimer_num; + +struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; +EXPORT_SYMBOL_GPL(sfi_mrtc_array); + +struct blocking_notifier_head intel_scu_notifier = + BLOCKING_NOTIFIER_INIT(intel_scu_notifier); +EXPORT_SYMBOL_GPL(intel_scu_notifier); + +/* parse all the mtimer info to a static mtimer array */ +int __init sfi_parse_mtmr(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_timer_table_entry *pentry; + struct mpc_intsrc mp_irq; + int totallen; + + sb = (struct sfi_table_simple *)table; + if (!sfi_mtimer_num) { + sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, + struct sfi_timer_table_entry); + pentry = (struct sfi_timer_table_entry *) sb->pentry; + totallen = sfi_mtimer_num * sizeof(*pentry); + memcpy(sfi_mtimer_array, pentry, totallen); + } + + pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); + pentry = sfi_mtimer_array; + for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { + pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n", + totallen, (u32)pentry->phys_addr, + pentry->freq_hz, pentry->irq); + if (!pentry->irq) + continue; + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; +/* triggering mode edge bit 2-3, active high polarity bit 0-1 */ + mp_irq.irqflag = 5; + mp_irq.srcbus = MP_BUS_ISA; + mp_irq.srcbusirq = pentry->irq; /* IRQ */ + mp_irq.dstapic = MP_APIC_ALL; + mp_irq.dstirq = pentry->irq; + mp_save_irq(&mp_irq); + } + + return 0; +} + +struct sfi_timer_table_entry *sfi_get_mtmr(int hint) +{ + int i; + if (hint < sfi_mtimer_num) { + if (!sfi_mtimer_usage[hint]) { + pr_debug("hint taken for timer %d irq %d\n", + hint, sfi_mtimer_array[hint].irq); + sfi_mtimer_usage[hint] = 1; + return &sfi_mtimer_array[hint]; + } + } + /* take the first timer available */ + for (i = 0; i < sfi_mtimer_num;) { + if (!sfi_mtimer_usage[i]) { + sfi_mtimer_usage[i] = 1; + return &sfi_mtimer_array[i]; + } + i++; + } + return NULL; +} + +void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) +{ + int i; + for (i = 0; i < sfi_mtimer_num;) { + if (mtmr->irq == sfi_mtimer_array[i].irq) { + sfi_mtimer_usage[i] = 0; + return; + } + i++; + } +} + +/* parse all the mrtc info to a global mrtc array */ +int __init sfi_parse_mrtc(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_rtc_table_entry *pentry; + struct mpc_intsrc mp_irq; + + int totallen; + + sb = (struct sfi_table_simple *)table; + if (!sfi_mrtc_num) { + sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, + struct sfi_rtc_table_entry); + pentry = (struct sfi_rtc_table_entry *)sb->pentry; + totallen = sfi_mrtc_num * sizeof(*pentry); + memcpy(sfi_mrtc_array, pentry, totallen); + } + + pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); + pentry = sfi_mrtc_array; + for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { + pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", + totallen, (u32)pentry->phys_addr, pentry->irq); + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = 0xf; /* level trigger and active low */ + mp_irq.srcbus = MP_BUS_ISA; + mp_irq.srcbusirq = pentry->irq; /* IRQ */ + mp_irq.dstapic = MP_APIC_ALL; + mp_irq.dstirq = pentry->irq; + mp_save_irq(&mp_irq); + } + return 0; +} + + +/* + * Parsing GPIO table first, since the DEVS table will need this table + * to map the pin name to the actual pin. + */ +static int __init sfi_parse_gpio(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_gpio_table_entry *pentry; + int num, i; + + if (gpio_table) + return 0; + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); + pentry = (struct sfi_gpio_table_entry *)sb->pentry; + + gpio_table = kmalloc(num * sizeof(*pentry), GFP_KERNEL); + if (!gpio_table) + return -1; + memcpy(gpio_table, pentry, num * sizeof(*pentry)); + gpio_num_entry = num; + + pr_debug("GPIO pin info:\n"); + for (i = 0; i < num; i++, pentry++) + pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," + " pin = %d\n", i, + pentry->controller_name, + pentry->pin_name, + pentry->pin_no); + return 0; +} + +int get_gpio_by_name(const char *name) +{ + struct sfi_gpio_table_entry *pentry = gpio_table; + int i; + + if (!pentry) + return -1; + for (i = 0; i < gpio_num_entry; i++, pentry++) { + if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) + return pentry->pin_no; + } + return -1; +} + +void __init intel_scu_device_register(struct platform_device *pdev) +{ + if (ipc_next_dev == MAX_IPCDEVS) + pr_err("too many SCU IPC devices"); + else + ipc_devs[ipc_next_dev++] = pdev; +} + +static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) +{ + struct spi_board_info *new_dev; + + if (spi_next_dev == MAX_SCU_SPI) { + pr_err("too many SCU SPI devices"); + return; + } + + new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed spi dev %s\n", + sdev->modalias); + return; + } + memcpy(new_dev, sdev, sizeof(*sdev)); + + spi_devs[spi_next_dev++] = new_dev; +} + +static void __init intel_scu_i2c_device_register(int bus, + struct i2c_board_info *idev) +{ + struct i2c_board_info *new_dev; + + if (i2c_next_dev == MAX_SCU_I2C) { + pr_err("too many SCU I2C devices"); + return; + } + + new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed i2c dev %s\n", + idev->type); + return; + } + memcpy(new_dev, idev, sizeof(*idev)); + + i2c_bus[i2c_next_dev] = bus; + i2c_devs[i2c_next_dev++] = new_dev; +} + +/* Called by IPC driver */ +void intel_scu_devices_create(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_add(ipc_devs[i]); + + for (i = 0; i < spi_next_dev; i++) + spi_register_board_info(spi_devs[i], 1); + + for (i = 0; i < i2c_next_dev; i++) { + struct i2c_adapter *adapter; + struct i2c_client *client; + + adapter = i2c_get_adapter(i2c_bus[i]); + if (adapter) { + client = i2c_new_device(adapter, i2c_devs[i]); + if (!client) + pr_err("can't create i2c device %s\n", + i2c_devs[i]->type); + } else + i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); + } + intel_scu_notifier_post(SCU_AVAILABLE, NULL); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_create); + +/* Called by IPC driver */ +void intel_scu_devices_destroy(void) +{ + int i; + + intel_scu_notifier_post(SCU_DOWN, NULL); + + for (i = 0; i < ipc_next_dev; i++) + platform_device_del(ipc_devs[i]); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); + +static void __init install_irq_resource(struct platform_device *pdev, int irq) +{ + /* Single threaded */ + static struct resource res __initdata = { + .name = "IRQ", + .flags = IORESOURCE_IRQ, + }; + res.start = irq; + platform_device_add_resources(pdev, &res, 1); +} + +static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct platform_device *pdev; + void *pdata = NULL; + + pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n", + pentry->name, pentry->irq); + pdata = dev->get_platform_data(pentry); + + pdev = platform_device_alloc(pentry->name, 0); + if (pdev == NULL) { + pr_err("out of memory for SFI platform device '%s'.\n", + pentry->name); + return; + } + install_irq_resource(pdev, pentry->irq); + + pdev->dev.platform_data = pdata; + platform_device_add(pdev); +} + +static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct spi_board_info spi_info; + void *pdata = NULL; + + memset(&spi_info, 0, sizeof(spi_info)); + strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); + spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); + spi_info.bus_num = pentry->host_num; + spi_info.chip_select = pentry->addr; + spi_info.max_speed_hz = pentry->max_freq; + pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n", + spi_info.bus_num, + spi_info.modalias, + spi_info.irq, + spi_info.max_speed_hz, + spi_info.chip_select); + + pdata = dev->get_platform_data(&spi_info); + + spi_info.platform_data = pdata; + if (dev->delay) + intel_scu_spi_device_register(&spi_info); + else + spi_register_board_info(&spi_info, 1); +} + +static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct i2c_board_info i2c_info; + void *pdata = NULL; + + memset(&i2c_info, 0, sizeof(i2c_info)); + strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); + i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); + i2c_info.addr = pentry->addr; + pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n", + pentry->host_num, + i2c_info.type, + i2c_info.irq, + i2c_info.addr); + pdata = dev->get_platform_data(&i2c_info); + i2c_info.platform_data = pdata; + + if (dev->delay) + intel_scu_i2c_device_register(pentry->host_num, &i2c_info); + else + i2c_register_board_info(pentry->host_num, &i2c_info, 1); +} + +static struct devs_id __init *get_device_id(u8 type, char *name) +{ + struct devs_id *dev = device_ids; + + if (device_ids == NULL) + return NULL; + + while (dev->name[0]) { + if (dev->type == type && + !strncmp(dev->name, name, SFI_NAME_LEN)) { + return dev; + } + dev++; + } + + return NULL; +} + +static int __init sfi_parse_devs(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_device_table_entry *pentry; + struct devs_id *dev = NULL; + int num, i; + int ioapic; + struct io_apic_irq_attr irq_attr; + + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); + pentry = (struct sfi_device_table_entry *)sb->pentry; + + for (i = 0; i < num; i++, pentry++) { + int irq = pentry->irq; + + if (irq != (u8)0xff) { /* native RTE case */ + /* these SPI2 devices are not exposed to system as PCI + * devices, but they have separate RTE entry in IOAPIC + * so we have to enable them one by one here + */ + ioapic = mp_find_ioapic(irq); + irq_attr.ioapic = ioapic; + irq_attr.ioapic_pin = irq; + irq_attr.trigger = 1; + irq_attr.polarity = 1; + io_apic_set_pci_routing(NULL, irq, &irq_attr); + } else + irq = 0; /* No irq */ + + dev = get_device_id(pentry->type, pentry->name); + + if ((dev == NULL) || (dev->get_platform_data == NULL)) + continue; + + if (dev->device_handler) { + dev->device_handler(pentry, dev); + } else { + switch (pentry->type) { + case SFI_DEV_TYPE_IPC: + sfi_handle_ipc_dev(pentry, dev); + break; + case SFI_DEV_TYPE_SPI: + sfi_handle_spi_dev(pentry, dev); + break; + case SFI_DEV_TYPE_I2C: + sfi_handle_i2c_dev(pentry, dev); + break; + case SFI_DEV_TYPE_UART: + case SFI_DEV_TYPE_HSI: + default: + break; + } + } + } + return 0; +} + +static int __init intel_mid_platform_init(void) +{ + sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); + sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); + return 0; +} +arch_initcall(intel_mid_platform_init); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/