Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 25 Oct 2002 16:41:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 25 Oct 2002 16:41:30 -0400 Received: from adsl-196-233.cybernet.ch ([212.90.196.233]:40148 "HELO mailphish.drugphish.ch") by vger.kernel.org with SMTP id ; Fri, 25 Oct 2002 16:41:27 -0400 Message-ID: <3DB9AEAC.4070804@drugphish.ch> Date: Fri, 25 Oct 2002 22:50:52 +0200 From: Roberto Nibali User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.1) Gecko/20020826 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Andre Hedrick Cc: linux-kernel@vger.kernel.org Subject: Possible broken IBM IDE disk (Dell I8k Laptop) Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10655 Lines: 236 Hello Andre, Could you once again give me your expert advice, please? I think this drive is going to drop dead soon as it starts making weird noises after a few hours of working. If I shut down the laptop for roughly 2-4 hours I can work again with it. What is your opinion on the drive's status? Do you need any other information? laphish:~ # tail /var/log/kernlog Oct 25 17:42:00 s_int@laphish NVRM: AGPGART: aperture: 64M @ 0xe8000000 Oct 25 17:42:00 s_int@laphish NVRM: AGPGART: aperture mapped from 0xe8000000 to 0xe39e6000 Oct 25 17:42:00 s_int@laphish NVRM: AGPGART: mode 4x Oct 25 17:42:00 s_int@laphish NVRM: AGPGART: allocated 16 pages Oct 25 17:55:13 s_int@laphish hda: timeout waiting for DMA Oct 25 17:55:13 s_int@laphish ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Oct 25 17:55:13 s_int@laphish hda: status timeout: status=0xd0 { Busy } Oct 25 17:55:13 s_int@laphish hdb: DMA disabled Oct 25 17:55:13 s_int@laphish hda: drive not ready for command Oct 25 17:55:15 s_int@laphish ide0: reset: success laphish:~ # smartctl -a /dev/hda Device: IBM-DJSA-232 Supports ATA Version 5 Drive supports S.M.A.R.T. and is enabled Check S.M.A.R.T. Passed. General Smart Values: Off-line data collection status: (0x04) Offline data collection activity was suspended by an interrupting command Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run Total time to complete off-line data collection: ( 550) Seconds Offline data collection Capabilities: (0x1b)SMART EXECUTE OFF-LINE IMMEDIATE Automatic timer ON/OFF support Suspend Offline Collection upon new command Offline surface scan supported Self-test supported Smart Capablilities: (0x0003) Saves SMART data before entering power-saving mode Supports SMART auto save timer Error logging capability: (0x01) Error logging supported Short self-test routine recommended polling time: ( 2) Minutes Extended self-test routine recommended polling time: ( 41) Minutes Vendor Specific SMART Attributes with Thresholds: Revision Number: 16 Attribute Flag Value Worst Threshold Raw Value ( 1)Raw Read Error Rate 0x000b 100 100 062 0 ( 2)Throughput Performance 0x0005 100 100 040 0 ( 3)Spin Up Time 0x0007 152 152 033 31 ( 4)Start Stop Count 0x0012 100 100 000 816 ( 5)Reallocated Sector Ct 0x0033 100 100 005 0 ( 7)Seek Error Rate 0x000b 100 100 067 0 ( 8)Seek Time Preformance 0x0005 100 100 040 0 ( 9)Power On Hours 0x0012 085 085 000 6647 ( 10)Spin Retry Count 0x0013 100 100 060 0 ( 12)Power Cycle Count 0x0032 100 100 000 692 (191)Gsense Error Rate 0x000a 100 100 000 0 (192)Power-Off Retract Count 0x0032 100 100 000 17 (193)Load Cycle Count 0x0012 030 030 000 708476 (196)Reallocated Event Count 0x0032 100 100 000 48 (197)Current Pending Sector 0x0022 100 100 000 0 (198)Offline Uncorrectable 0x0008 100 100 000 0 (199)UDMA CRC Error Count 0x000a 200 200 000 0 SMART Error Log: SMART Error Logging Version: 1 Error Log Data Structure Pointer: 03 ATA Error Count: 3 Non-Fatal Count: 0 Error Log Structure 1: DCR FR SC SN CL SH D/H CR Timestamp 00 ff 01 b9 ce 12 e0 c4 21 00 ff 01 ba ce 12 e0 c4 21 00 ff 01 bb ce 12 e0 c4 21 00 ff 01 bc ce 12 e0 c4 21 00 ff 01 bd ce 12 e0 c4 21 00 40 09 b0 b2 38 e0 59 0 Error condition: 0 Error State: 3 Number of Hours in Drive Life: 6622 (life of the drive in hours) Error Log Structure 2: DCR FR SC SN CL SH D/H CR Timestamp 00 ff 01 af ce 12 e0 c4 21 00 ff 01 b0 ce 12 e0 c4 21 00 ff 01 b1 ce 12 e0 c4 21 00 ff 01 b2 ce 12 e0 c4 21 00 ff 01 b3 ce 12 e0 c4 21 00 40 0e 2b b4 38 e0 59 0 Error condition: 0 Error State: 3 Number of Hours in Drive Life: 6622 (life of the drive in hours) Error Log Structure 3: DCR FR SC SN CL SH D/H CR Timestamp 04 ff 01 b4 ce 12 e0 c4 21 00 ff 01 b5 ce 12 e0 c4 21 00 ff 01 b6 ce 12 e0 c4 21 00 ff 01 b7 ce 12 e0 c4 21 00 ff 01 b8 ce 12 e0 c4 21 00 01 0b 2e b4 38 e0 59 0 Error condition: 0 Error State: 3 Number of Hours in Drive Life: 6622 (life of the drive in hours) laphish:~ # cat /proc/ide/hda/settings name value min max mode ---- ----- --- --- ---- acoustic 0 0 254 rw address 0 0 2 rw bios_cyl 3890 0 65535 rw bios_head 255 0 255 rw bios_sect 63 0 63 rw breada_readahead 8 0 255 rw bswap 0 0 1 r current_speed 68 0 69 rw failures 0 0 65535 rw file_readahead 124 0 16384 rw ide_scsi 0 0 1 rw init_speed 68 0 69 rw io_32bit 0 0 3 rw keepsettings 0 0 1 rw lun 0 0 7 rw max_failures 1 0 65535 rw max_kb_per_request 128 1 255 rw multcount 0 0 16 rw nice1 1 0 1 rw nowerr 0 0 1 rw number 0 0 3 rw pio_mode write-only 0 255 w slow 0 0 1 rw unmaskirq 0 0 1 rw using_dma 1 0 1 rw wcache 0 0 1 rw laphish:~ # cat /proc/ide/piix Intel PIIX4 Ultra 100 Chipset. --------------- Primary Channel ---------------- Secondary Channel ------------- enabled enabled --------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------ DMA enabled: yes no yes no UDMA enabled: yes yes no no UDMA enabled: 4 4 X X UDMA DMA PIO laphish:~ # hdparm -I /dev/hda /dev/hda: non-removable ATA device, with non-removable media Model Number: IBM-DJSA-232 Serial Number: 48W48LW9933 Firmware Revision: JS8OAD0A Standards: Used: ATA/ATAPI-5 T13 1321D revision 1 Supported: 2 3 4 5 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 bytes/track: 0 (obsolete) bytes/sector: 0 (obsolete) current sector capacity: 16514064 LBA user addressable sectors = 62506080 Capabilities: LBA, IORDY(can be disabled) Buffer size: 1874.5kB ECC bytes: 4 Queue depth: 1 Standby timer values: spec'd by Vendor, no device specific minimum r/w multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 16512 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * look-ahead * write cache * Power Management feature set Security Mode feature set * SMART feature set SET MAX security extension Address offset used (large drive) Power-Up In Standby feature set * Advanced Power Management feature set Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 42min for SECURITY ERASE UNIT. HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct laphish:~ # echo "6622/24" | bc -l 275.91666666666666666666 laphish:~ # Hey, I mean, they must be kidding me, after close to 276 days this bloody thing stops working correctly? Best regards, Roberto Nibali, ratz -- echo '[q]sa[ln0=aln256%Pln256/snlbx]sb3135071790101768542287578439snlbxq'|dc - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/