Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753086Ab3JYPuc (ORCPT ); Fri, 25 Oct 2013 11:50:32 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:40522 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751284Ab3JYPua (ORCPT ); Fri, 25 Oct 2013 11:50:30 -0400 Message-ID: <526A933C.4020904@ti.com> Date: Fri, 25 Oct 2013 21:20:20 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:17.0) Gecko/20130803 Thunderbird/17.0.8 MIME-Version: 1.0 To: Kamil Debski CC: , , , , , , , , , , , Mateusz Krawczuk Subject: Re: [PATCH 3/5] phy: Add support for S5PV210 to the Exynos USB PHY driver References: <1382710529-12082-1-git-send-email-k.debski@samsung.com> <1382710529-12082-4-git-send-email-k.debski@samsung.com> In-Reply-To: <1382710529-12082-4-git-send-email-k.debski@samsung.com> Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9014 Lines: 325 Hi, On Friday 25 October 2013 07:45 PM, Kamil Debski wrote: > From: Mateusz Krawczuk > > Add support for the Samsung's S5PV210 SoC to the Exynos USB PHY driver. > > Signed-off-by: Mateusz Krawczuk > [k.debski@samsung.com: whitespace cleanup and commit description] > Signed-off-by: Kamil Debski > --- > drivers/phy/Kconfig | 7 ++ > drivers/phy/phy-exynos-usb.c | 10 ++ > drivers/phy/phy-exynos-usb.h | 1 + > drivers/phy/phy-s5pv210-usb.c | 236 +++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 254 insertions(+) > create mode 100644 drivers/phy/phy-s5pv210-usb.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 0f598d0..d3517f9 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -22,6 +22,13 @@ config PHY_EXYNOS_USB > This driver provides common interface to interact, for Samsung > USB 2.0 PHY driver. > > +config PHY_S5PV210_USB > + bool "Support for S5PV210" > + depends on PHY_EXYNOS_USB > + depends on ARCH_S5PV210 > + help > + Enable USB PHY support for S5PV210 > + > config PHY_EXYNOS4210_USB > bool "Support for Exynos 4210" > depends on PHY_EXYNOS_USB > diff --git a/drivers/phy/phy-exynos-usb.c b/drivers/phy/phy-exynos-usb.c > index 172b774..01fb12a 100644 > --- a/drivers/phy/phy-exynos-usb.c > +++ b/drivers/phy/phy-exynos-usb.c > @@ -216,7 +216,17 @@ extern const struct uphy_config exynos4212_uphy_config; > extern const struct uphy_config exynos5250_uphy_config; > #endif > > +#ifdef CONFIG_PHY_S5PV210_USB > +extern const struct uphy_config s5pv210_uphy_config; > +#endif > + > static const struct of_device_id exynos_uphy_of_match[] = { > +#ifdef CONFIG_PHY_S5PV210_USB > + { > + .compatible = "samsung,s5pv210-usbphy", > + .data = &s5pv210_uphy_config, > + }, > +#endif > #ifdef CONFIG_PHY_EXYNOS4210_USB > { > .compatible = "samsung,exynos4210-usbphy", > diff --git a/drivers/phy/phy-exynos-usb.h b/drivers/phy/phy-exynos-usb.h > index a9febfa..0f385ca 100644 > --- a/drivers/phy/phy-exynos-usb.h > +++ b/drivers/phy/phy-exynos-usb.h > @@ -40,6 +40,7 @@ enum phy_type { > > enum samsung_cpu_type { > TYPE_S3C64XX, > + TYPE_S5PV210, > TYPE_EXYNOS4210, > TYPE_EXYNOS4212, > TYPE_EXYNOS5250, > diff --git a/drivers/phy/phy-s5pv210-usb.c b/drivers/phy/phy-s5pv210-usb.c > new file mode 100644 > index 0000000..575275d > --- /dev/null > +++ b/drivers/phy/phy-s5pv210-usb.c how different is this IP different from the previous ones? Does it deserve a separate driver or the previous drivers can be re-used? > @@ -0,0 +1,236 @@ > +/* > + * Samsung S5P/EXYNOS SoC series USB PHY driver > + * > + * Copyright (C) 2013 Samsung Electronics Co., Ltd. > + * Authors: Kamil Debski > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include "phy-exynos-usb.h" > + > +/* Exynos USB PHY registers */ > + > +/* PHY power control */ > +#define S5PV210_UPHYPWR 0x0 > + > +#define S5PV210_UPHYPWR_PHY0_SUSPEND (1 << 0) > +#define S5PV210_UPHYPWR_PHY0_PWR (1 << 3) > +#define S5PV210_UPHYPWR_PHY0_OTG_PWR (1 << 4) > +#define S5PV210_UPHYPWR_PHY0 ( \ > + S5PV210_UPHYPWR_PHY0_SUSPEND | \ > + S5PV210_UPHYPWR_PHY0_PWR | \ > + S5PV210_UPHYPWR_PHY0_OTG_PWR) > + > +#define S5PV210_UPHYPWR_PHY1_SUSPEND (1 << 6) > +#define S5PV210_UPHYPWR_PHY1_PWR (1 << 7) > +#define S5PV210_UPHYPWR_PHY1 ( \ > + S5PV210_UPHYPWR_PHY1_SUSPEND | \ > + S5PV210_UPHYPWR_PHY1_PWR) > + > +/* PHY clock control */ > +#define S5PV210_UPHYCLK 0x4 > + > +#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) > +#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) > +#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) > +#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) > + > +#define S5PV210_UPHYCLK_PHY0_ID_PULLUP (0x1 << 2) > +#define S5PV210_UPHYCLK_PHY0_COMMON_ON (0x1 << 4) > +#define S5PV210_UPHYCLK_PHY1_COMMON_ON (0x1 << 7) > + > +/* PHY reset control */ > +#define S5PV210_UPHYRST 0x8 > + > +#define S5PV210_URSTCON_PHY0 (1 << 0) > +#define S5PV210_URSTCON_OTG_HLINK (1 << 1) > +#define S5PV210_URSTCON_OTG_PHYLINK (1 << 2) > +#define S5PV210_URSTCON_PHY1_ALL (1 << 3) > +#define S5PV210_URSTCON_HOST_LINK_ALL (1 << 4) > + > +/* Isolation, configured in the power management unit */ > +#define S5PV210_USB_ISOL_DEVICE_OFFSET 0x0 > +#define S5PV210_USB_ISOL_DEVICE (1 << 0) > +#define S5PV210_USB_ISOL_HOST_OFFSET 0x4 > +#define S5PV210_USB_ISOL_HOST (1 << 1) > + > + > +enum s5pv210_phy_id { > + S5PV210_DEVICE, > + S5PV210_HOST, > + S5PV210_NUM_PHYS, > +}; > + > +/* s5pv210_rate_to_clk() converts the supplied clock rate to the value that > + * can be written to the phy register. */ > +static u32 s5pv210_rate_to_clk(unsigned long rate) > +{ > + unsigned int clksel; > + > + pr_info("%lu \n",rate); > + switch (rate) { > + case 12 * MHZ: > + clksel = S5PV210_UPHYCLK_PHYFSEL_12MHZ; > + break; > + case 24 * MHZ: > + clksel = S5PV210_UPHYCLK_PHYFSEL_24MHZ; > + break; > + case 48 * MHZ: > + clksel = S5PV210_UPHYCLK_PHYFSEL_48MHZ; > + break; > + default: > + clksel = CLKSEL_ERROR; > + } > + > + return clksel; > +} > + > +static void s5pv210_isol(struct uphy_instance *inst, bool on) > +{ > + struct uphy_driver *drv = inst->drv; > + u32 mask; > + u32 tmp; > + > + if (!drv->reg_isol) > + return; > + > + switch (inst->cfg->id) { > + case S5PV210_DEVICE: > + mask = S5PV210_USB_ISOL_DEVICE; > + break; > + case S5PV210_HOST: > + mask = S5PV210_USB_ISOL_HOST; > + break; > + default: > + return; > + }; > + > + tmp = readl(drv->reg_isol); > + if (on) > + tmp &= ~mask; > + else > + tmp |= mask; > + writel(tmp, drv->reg_isol); > +} > + > +static void s5pv210_phy_pwr(struct uphy_instance *inst, bool on) > +{ > + struct uphy_driver *drv = inst->drv; > + u32 rstbits = 0; > + u32 phypwr = 0; > + u32 rst; > + u32 pwr; > + > + switch (inst->cfg->id) { > + case S5PV210_DEVICE: > + phypwr = S5PV210_UPHYPWR_PHY0; > + rstbits = S5PV210_URSTCON_PHY0; > + break; > + case S5PV210_HOST: > + phypwr = S5PV210_UPHYPWR_PHY1; > + rstbits = S5PV210_URSTCON_PHY1_ALL | > + S5PV210_URSTCON_HOST_LINK_ALL; > + break; > + }; > + > + if (on) { > + writel(inst->clk, drv->reg_phy + S5PV210_UPHYCLK); > + > + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); > + pwr &= ~phypwr; > + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); > + > + rst = readl(drv->reg_phy + S5PV210_UPHYRST); > + rst |= rstbits; > + writel(rst, drv->reg_phy + S5PV210_UPHYRST); > + udelay(10); > + rst &= ~rstbits; > + writel(rst, drv->reg_phy + S5PV210_UPHYRST); > + } else { > + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); > + pwr |= phypwr; > + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); > + } > +} > + > +static int s5pv210_power_on(struct uphy_instance *inst) > +{ > + struct uphy_driver *drv = inst->drv; > + > + if (inst->state == STATE_ON) { > + dev_err(drv->dev, "usb phy \"%s\" already on", > + inst->cfg->label); > + return -ENODEV; > + } > + inst->state = STATE_ON; > + inst->ref_cnt++; > + if (inst->ref_cnt > 1) > + return 0; > + > + s5pv210_isol(inst, 0); > + s5pv210_phy_pwr(inst, 1); > + > + return 0; > +} > + > +static int s5pv210_power_off(struct uphy_instance *inst) > +{ > + struct uphy_driver *drv = inst->drv; > + > + if (inst->state == STATE_OFF) { > + dev_err(drv->dev, "usb phy \"%s\" already off", > + inst->cfg->label); > + return -EINVAL; > + } > + > + inst->state = STATE_OFF; > + inst->ref_cnt++; > + if (inst->ref_cnt > 0) > + return 0; > + > + s5pv210_phy_pwr(inst, 0); > + s5pv210_isol(inst, 1); > + > + return 0; > +} > + > + > +static const struct common_phy s5pv210_phys[] = { > + { > + .label = "device", > + .type = PHY_DEVICE, > + .id = S5PV210_DEVICE, > + .rate_to_clk = s5pv210_rate_to_clk, > + .power_on = s5pv210_power_on, > + .power_off = s5pv210_power_off, > + }, > + { > + .label = "host", > + .type = PHY_HOST, > + .id = S5PV210_HOST, > + .rate_to_clk = s5pv210_rate_to_clk, > + .power_on = s5pv210_power_on, > + .power_off = s5pv210_power_off, > + }, > + {}, > +}; > + > +const struct uphy_config s5pv210_uphy_config = { > + .cpu = TYPE_S5PV210, > + .num_phys = S5PV210_NUM_PHYS, > + .phys = s5pv210_phys, > +}; IMO this looks similar to the other drivers. Please re-use the drivers wherever possible. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/