Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 3 Feb 2001 06:42:05 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 3 Feb 2001 06:41:55 -0500 Received: from smtp3.xs4all.nl ([194.109.127.132]:18438 "EHLO smtp3.xs4all.nl") by vger.kernel.org with ESMTP id ; Sat, 3 Feb 2001 06:41:43 -0500 Date: Sat, 3 Feb 2001 11:36:04 +0000 From: "Roeland Th. Jansen" To: "Maciej W. Rozycki" Cc: Frank de Lange , linux-kernel@vger.kernel.org Subject: Re: hard crashes 2.4.0/1 with NE2K stuff Message-ID: <20010203113604.A625@grobbebol.xs4all.nl> In-Reply-To: <20010202145504.A607@grobbebol.xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from macro@ds2.pg.gda.pl on Fri, Feb 02, 2001 at 09:42:30PM +0100 X-OS: Linux grobbebol 2.4.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Feb 02, 2001 at 09:42:30PM +0100, Maciej W. Rozycki wrote: > Could you please apply the following patch, wait for a lockup, then hit > SysRq+A (you need to have CONFIG_MAGIC_SYSRQ enabled) and send me the > resulting output? You need to include debug messages, so I recommend to > use `dmesg' for getting the log. > > I'd like to know if the conditions are the same as previously. ok. the conditions are this : 2.4.1 with your APIC patch & the sysrq-a addition. the system doesn't lock up anymore with your patch as mentioned before. what does happen is that the ne2k doesn't react anymore (eth0 dead). I have sysrq'd twice. the first one is the one where it works, then, after a floodping of only 5 seconds, eth0 stops working. the floodping is generated from outside towards this machine. then again I sysrq'd/ here are the results. I glued dmesg from begin to end so that all messages are visible from boot time. pls explain what you find :-) Linux version 2.4.1 (root@grobbebol) (gcc version 2.95.2 19991024 (release)) #5 SMP Sat Feb 3 11:02:44 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000ff00000 @ 0000000000100000 (usable) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f5ae0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bootup CPU Processor #1 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. SEP present. MTRR present. PGE present. MCA present. CMOV present. Bus #0 is PCI Bus #1 is PCI Bus #2 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 2, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 2, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 3, trig 3, bus 0, IRQ 1f, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 2c, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 4c, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 4d, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17 Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: BOOT_IMAGE=linux ro root=302 Initializing CPU#0 Detected 467.732 MHz processor. Console: colour VGA+ 132x43 Calibrating delay loop... 933.88 BogoMIPS Memory: 255540k/262144k available (939k kernel code, 6216k reserved, 391k data, 204k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU0: Intel Celeron (Mendocino) stepping 05 per-CPU timeslice cutoff: 365.67 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 0 Getting ID: f000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/1 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Initializing CPU#1 CPU#1 (phys ID: 1) waiting for CALLOUT Startup point 1. Waiting for send to finish... +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 933.88 BogoMIPS Stack at about c15fffbc CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check reporting enabled on CPU#1. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 OK. CPU1: Intel Celeron (Mendocino) stepping 05 CPU has booted. Before bogomips. Total of 2 processors activated (1867.77 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-9, 2-12, 2-17, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 003 03 0 0 0 0 0 1 1 71 0b 003 03 0 0 0 0 0 1 1 79 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89 10 003 03 1 1 0 1 0 1 1 91 11 000 00 1 0 0 0 0 0 0 00 12 003 03 1 1 0 1 0 1 1 99 13 003 03 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ10 -> 10 IRQ11 -> 11 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ18 -> 18 IRQ19 -> 19 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 467.7620 MHz. ..... host bus clock speed is 66.8228 MHz. cpu: 0, clocks: 668228, slice: 222742 CPU0 cpu: 1, clocks: 668228, slice: 222742 CPU1 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I9,P0) -> 19 PCI->APIC IRQ transform: (B0,I11,P0) -> 18 PCI->APIC IRQ transform: (B0,I19,P0) -> 18 PCI->APIC IRQ transform: (B0,I19,P1) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket DMI 2.2 present. 41 structures occupying 1111 bytes. DMI table at 0x000F0800. BIOS Vendor: Award Software International, Inc. BIOS Version: 4.51 PG BIOS Release: 04/20/00 Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 169730kB/56576kB, 512 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio HPT366: IDE controller on PCI bus 00 dev 99 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio hda: ST313021A, ATA DISK drive hdc: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=25232/16/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS03 at 0x02e8 (irq = 3) is a 16550A Real Time Clock Driver v1.10d SCSI subsystem driver Revision: 1.00 scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff scsi0: Configuring BusLogic Model BT-930 PCI Ultra SCSI Host Adapter scsi0: Firmware Version: 5.02, I/O Address: 0xC800, IRQ Channel: 18/Level scsi0: PCI Bus: 0, Device: 11, Address: 0xD8000000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Disabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled scsi0: SCSI Bus Termination: Enabled, SCAM: Disabled scsi0: *** BusLogic BT-930 Initialized Successfully *** scsi0 : BusLogic BT-930 Vendor: COMPAQ Model: ST15150N Rev: 5217 Type: Direct-Access ANSI SCSI revision: 02 scsi0: Target 0: Queue Depth 28, Synchronous at 10.0 MB/sec, offset 15 usb.c: registered new driver usbdevfs usb.c: registered new driver hub NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 204k freed Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 8386000 512-byte hdwr sectors (4294 MB) sda: sda1 reiserfs: checking transaction log (device 08:01) ... Using tea hash to sort names reiserfs: using 3.5.x disk format ReiserFS version 3.6.25 i2c-core.o: i2c core module i2c-isa.o version 2.5.4 (20001012) i2c-core.o: adapter ISA main adapter registered as adapter 0. i2c-isa.o: ISA bus access for i2c modules initialized. sensors.o version 2.5.4 (20001012) w83781d.o version 2.5.4 (20001012) i2c-core.o: driver W83781D sensor driver registered. i2c-core.o: client [W83782D chip] registered to adapter [ISA main adapter](pos. 0). scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: CD-Writer+ 9100 Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html eth0: RealTek RTL-8029 found at 0xc400, IRQ 19, 00:20:18:54:6F:35. Adding Swap: 51192k swap-space (priority -1) SysRq: print_PIC() printing PIC contents ... PIC IMR: fffa ... PIC IRR: 0000 ... PIC ISR: 0000 ... PIC ELCR: 1200 print_IO_APIC() number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 003 03 0 0 0 0 0 1 1 71 0b 003 03 0 0 0 0 0 1 1 79 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89 10 003 03 1 1 0 1 0 1 1 91 11 000 00 1 0 0 0 0 0 0 00 12 003 03 0 1 0 1 0 1 1 99 13 003 03 0 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ10 -> 10 IRQ11 -> 11 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ18 -> 18 IRQ19 -> 19 .................................... done. print_all_local_APICs() printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00040011 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC EOI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000001000000 01000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 000008fc ... APIC ICR2: 02000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010000 ... APIC LVT0: 00000400 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000a324 ... APIC TMCCT: 000090ee ... APIC TDCR: 00000003 printing local APIC contents on CPU#1/1: ... APIC ID: 01000000 (1) ... APIC VERSION: 00040011 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000f0 (f0) ... APIC PROCPRI: 00000000 ... APIC EOI: 00000000 ... APIC LDR: 02000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000001000000 01000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000001000 ... APIC ESR: 00000000 ... APIC ICR: 000c08fb ... APIC ICR2: 01000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010000 ... APIC LVT0: 00000400 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000a324 ... APIC TMCCT: 00007339 ... APIC TDCR: 00000003 SysRq: print_PIC() printing PIC contents ... PIC IMR: fffa ... PIC IRR: 0200 ... PIC ISR: 0000 ... PIC ELCR: 1200 print_IO_APIC() number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 003 03 0 0 0 0 0 1 1 71 0b 003 03 0 0 0 0 0 1 1 79 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 81 0f 003 03 0 0 0 0 0 1 1 89 10 003 03 1 1 0 1 0 1 1 91 11 000 00 1 0 0 0 0 0 0 00 12 003 03 0 1 0 1 0 1 1 99 13 003 03 0 1 1 1 1 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ10 -> 10 IRQ11 -> 11 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ18 -> 18 IRQ19 -> 19 .................................... done. print_all_local_APICs() printing local APIC contents on CPU#1/1: ... APIC ID: 01000000 (1) ... APIC VERSION: 00040011 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC EOI: 00000000 ... APIC LDR: 02000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000001000000 01000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 000008fc ... APIC ICR2: 01000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010000 ... APIC LVT0: 00000400 ... APIC LVT1: 00010400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000a324 ... APIC TMCCT: 00001e10 ... APIC TDCR: 00000003 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 00040011 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 000000e0 (e0) ... APIC PROCPRI: 00000000 ... APIC EOI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC TMR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000001000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 ... APIC IRR field: 0123456789abcdef0123456789abcdef 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000000000000000000000 00000000000000010000000000000000 ... APIC ESR: 00000000 ... APIC ICR: 000c08fb ... APIC ICR2: 02000000 ... APIC LVTT: 000200ef ... APIC LVTPC: 00010000 ... APIC LVT0: 00000400 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 0000a324 ... APIC TMCCT: 00007b18 ... APIC TDCR: 00000003 -- Grobbebol's Home | Don't give in to spammers. -o) http://www.xs4all.nl/~bengel | Use your real e-mail address /\ Linux 2.2.16 SMP 2x466MHz / 256 MB | on Usenet. _\_v - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/