Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755063Ab3JaQWu (ORCPT ); Thu, 31 Oct 2013 12:22:50 -0400 Received: from mail-ob0-f178.google.com ([209.85.214.178]:56398 "EHLO mail-ob0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751272Ab3JaQWs convert rfc822-to-8bit (ORCPT ); Thu, 31 Oct 2013 12:22:48 -0400 MIME-Version: 1.0 In-Reply-To: <07e8973b4665cc23c3f4a77e9c7e2b7c@mail.onse.fi> References: <1380659456-3746-1-git-send-email-anssi.hannula@iki.fi> <1380659456-3746-2-git-send-email-anssi.hannula@iki.fi> <07e8973b4665cc23c3f4a77e9c7e2b7c@mail.onse.fi> Date: Thu, 31 Oct 2013 17:22:48 +0100 Message-ID: Subject: Re: [PATCH 1/4] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support From: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= To: Anssi Hannula Cc: Takashi Iwai , alsa-devel@alsa-project.org, =?UTF-8?Q?Peter_Fr=C3=BChberger?= , Olivier Langlois , Linux Kernel Mailing List Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5728 Lines: 164 2013/10/30 Anssi Hannula : > BTW, there is a newer version (which was actually applied) of this patchset > in alsa-devel@, seems you were missing from CC on that one. I didn't try that updated version yet, but I'm afraid I discovered some problem. I've switched from my Denon 1912 to the older Onkyo TX-SR605 and there is problem with multichannel playback. I've tried: > speaker-test -D hdmi:CARD=Generic,DEV=0 -c6 -r192000 -F S16_LE speaker-test 1.0.25 Playback device is hdmi:CARD=Generic,DEV=0 Stream parameters are 192000Hz, S16_LE, 6 channels Using 16 octaves of pink noise Rate set to 192000Hz (requested 192000Hz) Buffer size range from 64 to 87360 Period size range from 32 to 43680 Using max buffer size 87360 Periods = 4 was set period_size = 17472 was set buffer_size = 87360 0 - Front Left 4 - Center 1 - Front Right 3 - Rear Right 2 - Rear Left 5 - LFE Time per period = 17.027360 But I can hear sound for rear right and rear left only :( Is there anything more I can provide to help resolve this? Do you have any idea how we can resolve this? zajec@linux-samsung700g7a:/proc/asound/card1> cat eld#0.0 monitor_present 1 eld_valid 1 monitor_name connection_type HDMI eld_version [0x2] CEA-861D or below edid_version [0x0] no CEA EDID Timing Extension block present manufacture_id 0x0 product_id 0x0 port_id 0x0 support_hdcp 0 support_ai 0 audio_sync_delay 0 speakers [0x4f] FL/FR LFE FC RL/RR RLC/RRC sad_count 6 sad0_coding_type [0x1] LPCM sad0_channels 2 sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad0_bits [0xe0000] 16 20 24 sad1_coding_type [0x2] AC-3 sad1_channels 8 sad1_rates [0xe0] 32000 44100 48000 sad1_max_bitrate 640000 sad2_coding_type [0x7] DTS sad2_channels 8 sad2_rates [0xc0] 44100 48000 sad2_max_bitrate 1536000 sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus) sad3_channels 8 sad3_rates [0xc0] 44100 48000 sad4_coding_type [0xb] DTS-HD sad4_channels 8 sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000 sad5_coding_type [0xc] MLP (Dolby TrueHD) sad5_channels 8 sad5_rates [0x6c0] 44100 48000 88200 96000 zajec@linux-samsung700g7a:/proc/asound/card1> ls codec#0 eld#0.0 id pcm3p zajec@linux-samsung700g7a:/proc/asound/card1> cat codec#0 Codec: ATI R6xx HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100200 No Modem Function Group found Default PCM: rates [0x70]: 32000 44100 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 Power: setting=D0, actual=D0 GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled GenLevel Digital category: 0x2 IEC Coding Type: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="ELD", index=0, device=3 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Connection: 1 0x02 zajec@linux-samsung700g7a:/proc/asound/card1> cat eld#0.0 monitor_present 1 eld_valid 1 monitor_name connection_type HDMI eld_version [0x2] CEA-861D or below edid_version [0x0] no CEA EDID Timing Extension block present manufacture_id 0x0 product_id 0x0 port_id 0x0 support_hdcp 0 support_ai 0 audio_sync_delay 0 speakers [0x4f] FL/FR LFE FC RL/RR RLC/RRC sad_count 6 sad0_coding_type [0x1] LPCM sad0_channels 2 sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad0_bits [0xe0000] 16 20 24 sad1_coding_type [0x2] AC-3 sad1_channels 8 sad1_rates [0xe0] 32000 44100 48000 sad1_max_bitrate 640000 sad2_coding_type [0x7] DTS sad2_channels 8 sad2_rates [0xc0] 44100 48000 sad2_max_bitrate 1536000 sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus) sad3_channels 8 sad3_rates [0xc0] 44100 48000 sad4_coding_type [0xb] DTS-HD sad4_channels 8 sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000 sad5_coding_type [0xc] MLP (Dolby TrueHD) sad5_channels 8 sad5_rates [0x6c0] 44100 48000 88200 96000 >> Now the main question... do you have any experience on using DTS-HD MA >> (or TrueHD) with mplayer? :| > > > Nope (well, any that I still remember). Support is there, though, so I guess > it should work. After some testing I found out that xbmc works very nice :) -- Rafał -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/